530991
13
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
25
Remove the fabric from under the foot. Draw the upper thread through the backside
of the fabric and knot upper and lower threads. Cut the center of the buttonhole with
the seam ripper, being careful not to cut the stitches on either side.
Tips:
1. Slightly reduce the upper thread tension to produce better results.
2. Use backing material for fine and stretchy fabrics.
NEEDLE SIZE FABRICS THREAD
9-11(65-75) Lightweight fabrics-thin cottons,
voile,serge, silk, muslin, Qiana,
interlocks, cotton knits, tricots,
jerseys, crepes, wovenplyester,
shirt& blouse fabrics.
Light-duty thread in cotto, nylon or
polyester.
12(80) Medium weight fabrics-cotton,
satin, kettlecloth, sailcloth, double
knits, lightweight woollens.
Most threads old are medium size
and suitable for these fabrics and
needle sizes. Use polyester
threads on synthetic materials and
cotton or natural woven fabrics for
best results. Always use the same
thread on top and bottom.
14(90) Medium weight fabrics-cotton
duck, woolen, heavier knits,
terrycloth, denims.
16(100) Heavyweight fabrics-canvas,
woolens, outdoor tent and quilted
fabrics, denims, upholstery
material (light to medium)
18(110) Heavy woollens, overcoat fabrics,
upholstery fabrics, some leathers
and vinyls
Heavy duty thread, carpet thread.
(use heavy foot pressure-large
numbers).
26
Trouble shooting
Problem Cause Correction
Upper thread breaks 1. The machine is not
threaded correctly.
2. The thread tension is too
tight
3. The thread is too thick for
the needle.
4. The needle is not inserted
correctly.
5. The thread is round wound
the spool pin.
6. The needle is damaged.
1.Rethread the machine.
2. Reduce the thread tension
(lower number).
3. Select a larger needle.
4. Remove and reinsert the
needle (flat side towards the
back).
5. Remove the bobbin and
rewind the bobbin.
6.Replace the needle.
Lower thread breaks. 1. The lower thread is not
inserted correctly.
2. The upper thread tension is
too loose.
1.Check the threading
carefully.
2.adjust the upper thread
tension.
Skipped stitches 1. The needlenis not inserted
correctly.
2. The needle is damaged.
3. The wrong size needle has
been used.
4. The foot is not attached
correctly.
1.Remove and reinsert needle
(flat side towards the back).
2. Insert a new needle.
3.Choose a needle to suit the
the thread and fabric.
4.Check and attach correctly.
Needle breaks
Loose stitches
1.The needle is damaged.
2.The needle is not inserted
correctly.
3.Wrong needle size for the
fabric.
4.The wrong foot is attached.
1. The machine is not
threated correctly.
2. The bobbin case is not
correctly threated.
3. Needle/fabric/thread
combination is wrong.
4. Thread tension wrong.
1. Insert a new needle.
2.Insert the needle correctly
(flat side towards the back).
3. Choose a needle to suit the
thread and fabric.
4. Check and attach correctly.
1.Check the threading.
2. Thread the bobbin case as
illustraded.
3. The needle size must suit
the fabric and thread.
4. Correct the thread tension.
Seams puckering 1.The needle is too large for
fabric.
2. The stitch length is wrongly
adjusted.
3. The thread tension is too
tight.
1.Select a finer needle.
2.Readjust the stitch length.
3.Loosen the thread tension.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tristar SM-6001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tristar SM-6001 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info