485389
32
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
GB
4. S-Video Output
Analog video output for connecting Home Theatre systems through matching input jacks.
5. Analog Video Output
Analog video output for connecting Home Theater systems or monitors. The available video output
signal format is "CVBS"
6. Digital Audio Output (Coaxial)
Dolby Digital and Linear PCM Stereo output for digital input of a HiFi or A/V system with integrated
digital decoder.
7. Analog Audio Output (Stereo)
Audio Stereo L/ R signal for connecting your TV, HiFi or Home Theatre system.
8. SCART Connector (TV)
For connection of all audio and video signals of this digital receiver to the TV set.The video signal
is output as RGB or "CVBS" (F-BAS) respectively.
9. SCART Connector (VCR)
For connection of all audio and video signals of this digital receiver to a video cassette recorder
(VCR).The video signal is output as "CVBS" (F-BAS) respectively
10. VHF / UHF Terrestrial Antenna Input 1 (RF 1)
This signal input is allocated to Tuner 1. Connect your DVB-T aerial antenna to this terminal (RF1
IN). "Active" antennas system with amplifiers built-in will be powered with the required 5V via this
terminal; (to be selected in the "General Settings" menu, item "Antenna Booster Power").
11. Antenna Loop-Through Output 1 (RF 1)
If you have another analogue or digital receiver or RF 2 Input and you wish to use the same
antenna, then you can connect it to this "antenna loop-through" output jack (RF OUT)
12. VHF / UHF Terrestrial Antenna Input 2 (RF 2)
This signal input is allocated to Tuner 2. Under normal
circumstances the same aerial antenna is used for both tuners
1 and 2. Thus we recommend connecting Terminal 2 (RF 2 IN)
to the Loop-through output of Tuner 1 (RF 1 OUT) with the
supplied patch cable (see figure).
Note: If, however, you use separate aerial antennas for the tuners, please be aware of the fact that
the Terminal "RF 2 IN" does not provide the 5V power feed required by active aerial antennas
13. Antenna Loop-Through Output 2 (RF 2)
If the Loop-through output 1 is occupied (e.g. the patch cable connects it to Tuner 2), you can
connect another digital or analogue TV receiver via the Loop-through output 2 (RF2 OUT) to the
same aerial antenna. The "Loop-through" signal is then input to this device.
14. Mechanical Power Switch
Please note that the STB will be isolated completely from the 230V mains supply only after setting
this mechanical power switch to OFF.If the device is not used for a long period of time, we
recommend switching it off completely with this switch and disconnecting it from the power supply.
CAUTION:
Do not mix up RF IN and RF OUT jacks when connecting your antenna system.
DVB T1 TWIN
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Triax DVB T1 Twin bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Triax DVB T1 Twin in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 9,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info