3.3 Configuring the IP Address of the Computer
If you are failed to access to the Video Encoder, please check the IP
address of your computer. When you connect the device to your
computer directly to proceed with configuration of the device, you need
to set up the IP addresses to be in the same segment for the two devices
to communicate.
1. On your computer, click Start > Control Panel to open the Control
Panel window.
2. Double-click Network Connection to open the Network Connection
window.
3. Right-click Local Area Connection and then click Properties from the
shortcut menu.
4. When the Local Area Connection Properties window appears, select
the General tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to bring
up the Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of the
device, select the Use the following IP address option. Then, enter
an IP address into the empty field. The suggested IP address is
192.168.10.x (x is 1~254 except 30), and the suggested Subnet mask
is 255.255.255.0.
7. When you are finished, click OK.
