541129
42
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
TRENDnet User’s Guide
Cover Page
© Copyright 2011 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview ........................................................................... 1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Installation ...................................................................................... 3
Wired Connection ..................................................................................................... 3
WPS Connection ........................................................................................................ 3
Wall mount installation ............................................................................................. 4
Starting the Setup Wizard ............................................................... 5
Configuration ................................................................................ 10
Main Interface ............................................................................................................. 10
Setup Wizard ............................................................................................................... 12
System ......................................................................................................................... 15
Network................................................................................................................... 17
Wireless Setup......................................................................................................... 18
Dynamic DNS ........................................................................................................... 19
Video and Audio .......................................................................................................... 19
Video and Audio ...................................................................................................... 20
Day/Night Mode ...................................................................................................... 21
Audio Setup ............................................................................................................. 21
Image Setup ............................................................................................................ 21
Action ........................................................................................................................... 22
Recording ................................................................................................................ 22
Video Clip ................................................................................................................ 23
Snapshot ................................................................................................................. 25
Preset Position ........................................................................................................ 25
SD Management...................................................................................................... 27
Motion Detection ........................................................................................................ 27
Tools ............................................................................................................................ 28
System ..................................................................................................................... 28
Firmware Upgrade .................................................................................................. 28
Advanced ..................................................................................................................... 29
Device Info .............................................................................................................. 29
Log ........................................................................................................................... 29
How to setup/access the camera remotely .................................... 30
Technical Specifications ................................................................ 33
Troubleshooting ........................................................................... 37
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
1
Product Overview
TV-IP672W TV-IP672WI
Package Contents
In addition to your camera, the package includes:
Multi-Language Quick Installation Guide
CD-ROM (Utility & User’s Guide)
Network cable (1.5m / 5ft)
Power adapter (12V DC, 1.25A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor that the item was purchased.
Features
TV-IP672W
The Megapixel Wireless N PTZ Internet Camera, provides security over a large area. Pan the
camera side-to-side a remarkable 340 degrees and tilt up-and-down 115 degrees from any
Internet connection.
Wireless n technology provides unsurpassed wireless coverage and improved streaming video
quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected
Setup (WPS).
Record 1280 x 800 Megapixel (WXGA) video at up to 30 frames per second (fps). Manage up to
four video profiles to record HD video while streaming low resolution video to a compatible smart
phone at the same time. Manage up to 32 TRENDnet cameras with the included complimentary
camera management software. Advanced features include adjustable motion detection recording
areas, email alerts, scheduled recording sessions, pan/tilt Auto-Patrol, H.264/MPEG-4/MJPEG
image compression, date-and-time overlays, a Micro-SD card slot for backup storage, two-way
audio (speakers not included), an adjustable lens, and four times digital zoom. A wall/ceiling
mounting kit is included and the camera’s off white housing blends into most environments.
TV-IP672WI
The Megapixel Wireless N Day/Night PTZ Internet Camera, model TV- IP672WI, provides day and
night security over a large area. Pan the camera side-to-side a remarkable 340 degrees and tilt up-
and-down 115 degrees from any Internet connection.
Record indoor video in complete darkness for distances of up to 7.5 meters. Wireless n technology
provides unsurpassed wireless coverage and improved streaming video quality. Add this camera
to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS).
Record 1280 x 800 Megapixel (WXGA) video at up to 30 frames per second (fps). Manage up to
four video profiles to record HD video while streaming low resolution video to a compatible smart
phone at the same time. Manage up to 32 TRENDnet cameras with the included complimentary
camera management software. Advanced features include adjustable motion detection recording
areas, email alerts, pan/tilt Auto-Patrol, scheduled recording sessions, H.264/MPEG-4/MJPEG
image compression, date-and-time overlays, a Micro-SD card slot for backup storage, two-way
audio (speakers not included), an adjustable lens, and four times digital zoom. A wall/ceiling
mounting kit is included and the camera’s off white housing blends into most environments.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
2
Product Hardware Features
Rear Panel View
LAN Port Connect Ethernet cables to your wired network devices.
Power Port Connect the included power adapter from your camera to an
available power outlet.
Note: Use only the adapter that came with your camera.
Reset Button Use an item such as a paperclip to push and hold this button for
3 seconds and release to reset your camera to its factory defaults.
WPS (Wi-Fi Protected Setup) Push and hold this button for 3 seconds to
activate WPS. The button LED is blinking green when WPS is activated.
Line OutConnect speaker to enable audio out
Micro SD Lot Insert a Micro-SD card to store camera video files.
Antenna 2dBi detachable antenna
Front Panel View
IR LED Built-in 6 IR LED for night vision uses. (for TV-IP672WI)
Light SensorDetects the light source to turn IR on or off.
Focus Ring – Turn to adjust the focus of the camera.
Microphone Built-in microphone for audio can be turn on or off.
Privacy button Turns the camera on/off when necessary.
Power - This LED indicator is solid blue when your camera is powered on.
Otherwise if this LED indicator is off, there is no power to your camera.
LinkThis LED indicator is blinking orange when there is connection/data to
your camera.
IR LED
Power port
LAN port
Light Sensor
Microphone
Camera Lens
Power/Link LED
Antenna
WPS button
Reset button
Privacy button
Focus Ring
Line Out
Micro SD slot
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
3
Installation
Wired Connection
1. Connect the Ethernet Cable
If you intend to use the network camera as a wired device, connect one end of
the included Ethernet cable into the Ethernet port on the rear panel of the
camera and connect the other end to an available port on your network. If you
prefer to use the camera on a wireless network, see below for instructions on
connecting the power adapter.
2. Attach the Power Supply
Attach the included power supply to the DC 12V 1.25A receptor on the rear
panel of the camera and then connect it to a wall outlet or power strip. A blue
LED will light up under the lens indicating that the camera has power.
WPS Connection
An alternative method of connecting your camera to your network is by using WPS. WPS
is a quick, simple and secure method of adding devices to a network. If you have a
router which supports WPS follow the steps below, otherwise, please use the wired
mode of setting up the camera.
1. Attach the Power Supply
2. Press the WPS button on your wireless device then press the WPS button on
the camera.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
4
Wall mount installation
To attach the metal plates carry out the following:
Remove the two rubber pads under the base of the Camera.
Slide the metal plate onto the base of the camera, making sure that the two
holes on the base of the camera align with the two screw holes on the base of
the camera.
Secure the metal plate to the base of the Camera with the two screws
provided.
The camera can now be mounted to the ceiling or a wall. See the diagram
below for more information.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
5
Starting the Setup Wizard
Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run
automatically.
Note: If the Install Wizard does not run, you may have autorun disabled on your
machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the
installation wizard.
Begin by selecting Setup Wizard and follow the on-screen steps to continue the
installation.
When the installation of the Setup Wizard is complete, run the Setup Wizard:
1. Click Start > Programs > TRENDnet > SetupWizard > SetupWizard. The
TRENDnet Setup Wizard appears.
2. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back
of the camera and connect the AC power adapter to the camera. Click Next to
proceed.
3. From the list of cameras that appears, select the camera you wish to configure
and click Next to continue. If your camera is not listed, ensure that it is
connected to both power and the network and click to re-scan
the network for your camera.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
6
4. Login to your camera by entering the ID and Password. By default, both the ID
and Password are set to admin. Click Next to continue.
5. Enter a name for the camera in the Camera Name field. The name will be used
to identify your camera on the network. Enter the correct time for the camera
for the time zone it is in. If your camera is in the same time zone as the
computer you are using, click the icon to copy the local time
to the camera. Click Next to continue.
6. It is strongly recommended that you change your password to secure the
camera from being accessed by others. Check the Change Password box and
enter the new password in both password fields to confirm the new password.
Click Next to continue.
7. Select a connection option: (example uses DHCP connection type)
PPPoE: Select this option if your camera is directly connected to a DSL modem
and your ISP requires a PPPoE authentication to the Internet.
DHCP: Select this option if your camera is connected to a router and DHCP is
enabled.
Fixed IP: Select this option if your camera is directly connected to a DSL modem
and your ISP has supplied you with a fixed IP for your Internet connection.
Select the radio button for your connection type and click Next to continue.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
7
8. Select whether you want to use the camera over an wireless connection or on a
wired connection. Click No, I don’t want to use wireless for the camera. Then
click Next to continue. (skip to step 12 for wireless configuration)
9. A summary screen of the settings you have chosen appears. Click Next to
continue.
10. After the Setup Wizard configures the camera, the wizard starts to setup
process.
11. When the Setup Wizard has finished, the configuration is complete and the
following screen appears:
You are now ready to use your camera.
Click the IP address link or the link button to access the camera’s
advanced configuration page.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
8
12. When selecting the wireless setup choose “I want to use wireless for the
camera, click Next to continue.
Wireless Connection
Find the access point (AP) you wish to connect to from the Available AP drop
down menu.
In most cases you should leave the Channel set to Auto as the AP will
determine the channel of operation.
Select the type of authentication and encryption required by the access point
and enter the Key required to connect.
13. A summary screen of the settings you have chosen appears. Click Next to
continue.
14. After the Setup Wizard configures the camera, a screen prompting you for the
connection method appears.
Check the radio button for the method of connection you want to use for your camera
and click Next to continue.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
9
15. Connecting over wireless
Disconnect the Ethernet cable from the camera and wait for 1 minute for the
camera to turn to wireless mode then click Next to continue.
When the Setup Wizard has finished, the configuration is complete. If there is
no wireless connection found, the following screen will appear:
When the Setup Wizard has finished, the configuration is complete. If there is a
wireless connection found, the following screen will appear:
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
10
Configuration
After completing the Setup Wizard, you are ready to use your camera. The camera’s
built-in Web configuration utility is designed to allow you to easily access and configure
your TV-IP672W or TV-IP672WI camera. Open a web browser such as Internet Explorer®
and enter the IP address of your camera. To log in, use the User name admin and the
password you created in the Setup Wizard. If you did not create a password, the default
password is admin. After entering your password, click OK.
The home page for the TV-IP672W or TV-IP672WI appears.
Main Interface
COMPONENT DESCRIPTION
1. Live View This is the Main Screen. This shows whatever the camera is
pointed at.
2. Setup Setup provides all of the configuration options on the TV-
IP672W/WI
3. Motion Trigger
Click this button to activate motion
4. Record
Click this button to enable recording
5. Directional
Controller
Control the direction of the camera, zoom in or out, and
software Pan & Tilt functions.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
11
6. Pan This button pans the camera to the desired position from start
to Pan.
7. Patrol This button functions from start to auto patrol.
8. Stop This button stops the Pan & Patrol motion.
9. Go to This drop-down list gives you the option to select the camera
you want to configure.
10. Pan Speed Select the speed of the Pan motion from 1-10. 1 is the lowest
as 10 is the highest.
11. Tilt Speed Select the speed of the Tilt motion from 1-10. 1 is the slowest
as 10 is the fastest.
12. Live View
This screen shows the current view from the camera
13. Control
Navigational Menu
It contains a list of functions.
COMPONENT DESCRIPTION
Passive Profile This profile, in grey, is inactive.
Active Profile This profile, in yellow, is active.
Full Screen Mode The viewable screen is expanded to full screen
Snapshot Click this button to take a snapshot of your current viewing
angle.
Record Start recording the current video stream.
Storage Folder
Select this icon to select the folder where you want to store
video feeds.
Audio Click this button to toggle between sound and mute.
Microphone Click this button to use the microphone on the camera and
listen to your viewing angle’s surrounding area.
Zoom There are different zoom options under Zoom in/out. The
viewing angle can be zoomed in from 1 times, 2 times, and 4
times.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
12
Setup Wizard
To view the Setup Wizard settings:
1. Login to the camera as described in the section Using the web-based
configuration interface.Click on the Setup tab on the left panel.
2. Click Wizard. The Welcome to Internet Connection Setup Wizard screen
appears.
From the menu on the right side of the screen, click Next to start the Setup Wizard.
Step 1: LAN Settings
This screen provides two connection options: DHCP Connection and Static IP Address.
In DHCP Connection all fields are non-existent cause your router selects an IP address
for you. Under Static IP address field to enter the IP address details yourself according
to what your network provider gave you. Select the appropriate option and click Next to
continue.
Step 2: Internet Settings
This screen provides PPPoE settings and allows the camera to be connected directly to
your ADSL modem. Click the Enable checkbox to setup PPPoE. Enter a username and
password. If your internet connection doesn’t call for PPPoE deselect the Enable
checkbox and click Next
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
13
Step 3: DDNS Settings
This screen provides DDNS settings. Click the Enable checkbox to setup DDNS. Once you
have clicked Enable, select your DDNS Server and enter your Server Address. Enter a
Host Name, User Name, and Password. Verify the password by entering your details
again and then enter the Timeout settings in hours. Click Next to continue. If you do not
want to use the DDNS settings uncheck the Enable checkbox and click Next.
Step 4: Camera Name Settings
This screen provides Camera Name settings. In the Camera Name field type the name
you wish to assign to the camera and click Next to continue.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
14
Step 5: Time Zone Settings
This screen provides Time Zone settings. From the Time Zone drop-down list, select
your time zone. Click Enable Daylight Saving if you are going to use that time method
and select either Auto Daylight Saving or Set date and time manually. Click Next to
continue.
Step 6: Setup Complete
This screen provides Configuration Settings. The final screen shows the information you
have just configured. Click Back to make changes, Apply to set the changes and Cancel
to exit without saving the settings.
The camera will gather and reboot the camera to its new settings
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
15
System
System is divided into two main sections Admin and Time & Date. The Admin section
is where all Device Management configurations are handled.
Device Management consists of Admin Password Settings:
Admin Password Settings: Here you can change the administrator password settings.
Enter the Old Password, New Password, and Confirm New Password in their respective
fields.Click Save to continue.
Add User Account: Here you can add users who want to view images on the W/WI
Enter a User Name, Password, and Verify the New Password.Click Add to continue.
User List: Here you can select a user and click the Delete button to remove the user
from your list.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
16
Authentication: Here you have three options to authenticate. RTSP Authentication,
HTTP Authentication, and Snapshot. Click the checkbox to enable each authentication
process or leave them blank. Click Save to continue.
The camera allows users to access the video directly
For Internet Explorer, http://camera ip/directview/tvaview.cgi
For Non Internet Explorer, http://camera ip/directview/tvjview.cgi
When HTTP Authentication is enabled, user name and password are required to access
the direct view page.
Device Settings: Here you can change the Camera Name, click OSD to enable the Label
Name and check Time Stamp to singe times into your images. The LED light has three
options from the drop-down list: Power/Link, Off, or Flicker. The options are self-
explanatory. Click Save to continue.
Privacy Settings: Here you can enable/disable the Privacy button function.
The next configurable section under System is Time and Date. If you didn’t set the time
and date settings in the Setup Wizard, you can change them here.
Under Time Configuration, select a Time Zone from the drop-down list. Click the
checkbox next to Enable Daylight Saving to enable this function and choose either Auto
Daylight Saving or Set DST Manually. Click Apply to continue.
Under Automatic Time Configuration, click the Synchronize with NTP Server checkbox
if you wish to sync your W/WI with your NTP server. Click Apply to continue.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
17
Under Set Date and Time Manually, click the Setup Date and Time Manually checkbox
if you wish to set the time by yourself. From the drop-down list on all settings, select
your time and click Apply to continue or click Copy Your Computer’s Time Settings.
Network
This screen shows the LAN Settings. If you didn’t set your LAN settings in the Setup
Wizard, you can set them up here.
Under LAN Settings, select either DHCP Connection or Static IP Address. If you want to
setup PPPoE, click the PPPoE checkbox and enter the Username, Password, confirm the
Password and click Apply. The Status will change from Disabled to Enabled.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
18
Under Port Settings, select the HTTP Port (80 is the default) and also select the RTSP
Port (554). Under UPnP, click the UPnP checkbox if you want to enable this function.
Click the UPnP Port Forwarding checkbox if you want to enable to set the ports. Select
the External HTTP port and select the RTSP port. If you are using a MAC check the
Bonjour checkbox to enable this function. Click Apply to set the changes.
Wireless Setup
This screen shows the Wireless Settings. Click the Wireless checkbox to enable wireless.
Complete the details in the fields according to your router. Enter a Network Name,
under Site Survey select the SSID from the drop-down list or rescan your network
settings. Select the Wireless Mode from the drop-down list (Infrastructure, Ad-Hoc
mode). Select your Security Mode from the drop-down list. Select from WEP/WPA-
PSK/WPA2-PSK. Finally enter the security key. Click Apply to accept the changes.
WEP Wired Equivalent Privacy is a security protocol for wireless local area networks
defined in the 802.11b standard. WEP provides the same level of security as that of a
wired LAN.
WPA-PSK -
is a more secured method of wireless encryption. With WPA-PSK you don’t
provide your router with an encryption key but rather a paraphrase.
WPA2-PSKhighly secured method of wireless encryption.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
19
Dynamic DNS
Also under Network Settings is Dynamic DNS. If you have not enabled this function in
the Setup Wizard click the DDNS checkbox to enable Dynamic DDNS. Select your DDNS
server from the drop-down list and fill in the parameters from these fields: Host Name,
User Name, Password, Confirm Password, and Timeout. Click Apply to set these
changes and continue.
Video and Audio
This screen shows different video profiles where you can setup different functions for
the camera. The audio settings also allow for different settings. Each profile coincides
with the profile icons in Live View. Setting up each profile individually gives the user
better choice.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
20
Video and Audio
Under each profile settings there are six main functions, Encoder Type, Resolution,
Frames per Second, Encode Method, bps, and RTSP URL settings.
Encode Type: This sets the file format and file quality.
Resolution: This is the size of your image.
Frames Per Second: This is the speed at which each frame is captured
bps: Is the transmission speed of your data (4Mbps-64Kbps)
Encode Method: Is your Constant Bit Rate
BPS: Is the transmission speed of your data (4Mbps-64Kbps)
RTSP URL:is the RTSP URL where video streaming is accessed
.
Each Profile offers different specifications. Select the specifications that best suite you.
Video Profile One - Options:
Encode Type H.264 & MPEG4
Resolution 1280x800/640X400/320X192/160X96
FPS 30/15/10/5/3/2/1
Encode Method CBR/Quality
Bps
4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/12
8Kbps/64Kbps
RTSP URL play1.sdp
Video Profile Two - Options:
Encode Type H.264 & MPEG4
Resolution 640x400/320x192/160x96
FPS 30/15/10/5/3/2/1
Encode Method CBR/Quality
Bps
4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/12
8Kbps/64Kbps
RTSP URL play2.sdp
Video Profile Three - Options:
Encode Type JPEG
Resolution 1280x800/640X400/320X192/160X96
FPS 30/15/10/5/3/2/1
Encode Method Quality
Quality Low/Fair/Standard/Good/Excellent
RTSP URL play3.sdp
Video Profile Four for Mobile Devices Only - Options:
Encode Type H.264 & MPEG4
Resolution 640X400/320X192/160X96
FPS 30/15/10/5/3/2/1
Encode Method CBR/Quality
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
21
Bps
4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/12
8Kbps/64Kbps
RTSP URL 3gpp
Day/Night Mode
The TV-IP672WI allows users to record data in day and night mode. The TV-IP672WI
have LED’s for night mode. This section provides day and night options. You can select it
to run automatically, manually, in constant day mode or constant night mode.
Audio Setup
The TV-IP672W/TV-IP672WI allows users to record and broadcast audio. Click the
Speaker checkbox to change the volume settings on the camera’s speaker. Click the
Microphone checkbox and select your preference from the volume drop-down list. Click
Apply to continue.
Image Setup
Just like any camera, you are able to make changes to the image settings. With the
W/WI, you can change the Brightness, Contrast, color scheme to Black/White, Flip the
image, and change the Frequency, Shutter Speed, Saturation, Hue, Mirror, Auto
Exposure and White Balancing. The settings can be viewed “live” through the LIVE
VIDEO display in the forefront image.
If you wish to discard the changes you made click the Reset to Default
button.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
22
Action
Recording
This screen shows the SD Card parameters. You are able to set the recording options on
this page. Click the Recording checkbox to enable camera recording. All data is stored on
the removable SD card.
There are three main sections:
Trigger By: Always, Motion, Schedule,
Recording: Configure the recording options
SD Card: Recording files size
Trigger By - Always
This option allows you to record constantly. If you select Always bear in mind that the
Recording Type should be Video and that the source usually comes from Profiles 1, 2 or
4 under Source. Make sure the SD Card settings are setup to accommodate the huge
storage space required for Always connections. Click Apply to complete the
configuration.
Trigger By Schedule
This option allows you to record according to the schedule you setup. If you select
Schedule a calendar of the days of the week appear. Here you can select from each
day’s checkbox which days you want to setup and you can create a start and end time.
Click Apply to complete the configuration.
Trigger By Motion
This option allows you to record according to the motion parameters you setup. If you
select Motion, click the Onlyduring checkbox. Then a calendar of the days of the week
appears. Here you can click one of the day’s checkboxes and you can create a start and
end time. The Recording Type changes to pre-record or pre-event settings. This means
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
23
the camera will start recording before the allotted time schedule. These times can only
be set in seconds. Click Apply to complete the configuration.
Recording Type
The two main sections here are Snapshot and Video. Snapshot takes a picture from
your recorded data and only works with Profile 3. Video captures source data from
Profiles 1, 2, and 4. and is configurable in Video/Audio settings.
Target - SD Card
These settings depend on the size of your SD card. The larger your SD card the more
storage space you have to record data. Recording data can be recorded in increments of
1-6 minutes. Cyclic settings can also be checked.
Target - Samba Network Device
The Samba Network Device requires a NAS server or a Linux server to operate. Under
Server, enter the server address. Click the Anonymous radio button to allow
anonymous users to send files to the Samba server. Then enter the Share Folder, Sub
Folder (if needed) and enter the disk space needed.
If you click the Account radio button then enter a Username and Password. This will
authenticate the user every time they log on to the samba server.
Video Clip
Click the Video Clip checkbox to activate video recording events.
There are three main sections:
Trigger By: Always, Motion, Schedule,
Video Clip Type: Configure the recording options
Target: The targets available are FTP and E-mail. If you want to record data to an FTP
server, click FTP. If you want to record data to an E-mail account click E-mail.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
24
The Trigger by and Video Clip settings are similar to the options under Recording. Please
see the above description for details.
Target
Target offers two variables, FTP or Email. You cannot select both. If you select FTP enter
the details as laid out in the FTP field.
FTP Serverthis is your default FTP server address
Portthis is the default FTP Port (21) address
Usernamethe username your FTP administrator provided
Password the password your FTP administrator assigned you
Paththe directory
Filename Prefixthe filename you are using to access the data or save the data to
IntervalThe default interval range is 60-86400. The time the server interacts with your
camera
Passive ModeServer/client initiation access to bypass proxies.
For Email
Recipient E-mail Addressthe email address you want to send information to
SMTP Mail Server the mail server domain details
Port - the default Port number (25)
Usernamethe username settings provided by your email administrator
Password - the password settings provided by your email administrator
Sender Email Addressthe email address of the sender
Send next email afterthe alert email interval times
Use SSL-TLSthis is a secure method (please consult your administrator before using
this setting). There are two options, SSL-TLS or STARTTLS.
Click the Test button to proceed with a test. This will authenticate the
email details with your email server.
If the authentication is positive the test will be complete. If the test is a failure, the
result will not be successful.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
25
Snapshot
These settings control SNAPSHOT settings for your camera. The Trigger by settings is
similar to settings above, so please view the settings above. The Snapshot Type provides
for a Single snapshot or 6 snapshots at 1-2 second intervals. The Target FTP and Email
settings are similar to settings explained above. Please read the configuration in the
above explanation.
Preset Position
Preset Position
This screen shows the software Pan/Tilt functions. You can set preset positions for fast
authentication. Most of the screen is taken up by the camera image. On the right of the
main screen is the Pan & Tilt dial
1. Under Preset Position Enter a name in the field provided to give a name a
position.
2. Click Add.
3. To set a new Preset Position Use the Pan & Tilt dial to select your Pan & Tilt
speeds, and select the position.
4. Use the Set As Home button to choose it as your home screen.
5. Click the Default Home button if you wish to use this configuration as your
default home viewing area.
6. Preset Position From the Preset Position drop-down menu, you can select the
preset you created and delete it.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
26
The Pre-programmed Preset Positions is a list of presets you have setup under Preset
Position. This list is populated with different camera views and angles.
Patrol Selection
This area is where you setup the movement of the Pan/Tilt during a particular time
frame. This Patrol Position can be setup with different Pan/Patrol Speeds and Dwelling
time(s) in seconds. The Dwelling Time is the duration the camera takes to span a
particular area.
1. Setup the Preset Position Once you have setup the Preset in the previous
configuration list, select it from the Pre-programmed Preset Positions.
2. Click the Select button to transfer this preset to the Patrol Position.
3. Set the position of your Preset. This depends on the priority of Patrol Position
which item you want to make your priority.
4. For each Patrol Position you can adjust the Pan/Patrol Speed (1-3 with 1 being
the slowest), and Dwelling Time (in seconds). This indicates the time needed to
span an area covered by the camera.
5. Click Apply to continue and finish the process.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
27
SD Management
These settings control the management of data on the SD card installed on the camera.
Set the files per page – 5-100 files. To delete a file, select the file and click the Delete
checkbox to delete the file. If you wish to format your SC card at any time, click the
Format SD Card button.
Set Micro-SD card format toFAT32, it is recommended formatting the SD card to make
sure the SD card is compatible with the camera. (Please backup all data on the SD card
to other locations prior to this procedure)
Motion Detection
These settings control the motion detection settings on the camera. Motion detection
allows you to designate an area in the cameras viewing angle to capture motion within
that area. All other areas will not be recorded. This is useful if you want to limit your
recording to a particular size.
Click the Enable Video Motion checkbox to activate motion detection. There are two
main fields: Sensitivity and Drawing Mode. Sensitivity is based on the strength of the
motion in the designated area. 0% means the strength is low and the system moves up
incrementally to 100% full sensitive strength.
Drawing Mode provides two options. Once you select Draw motion area, take your
mouse and draw a rectangular area where you want the camera to detect the motion. If
you want to remove the motion detection area select Erase motion area and the red
blocked area will disappear. If you click the Clear button too it will also
remove the motion detection area. If you click the Refresh Image
button it will do as said. This is useful when the camera is out of focus and comes back
into focus at a later stage. Once you have set all setting options click Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
28
Tools
System
These settings allow you to save the recorded data to your local hard drive or retrieve it
from the drive. When you click the Save Configuration
button it saves a database file to your local system.
When you want to access recorded data from your hard drive, click the Browse button,
locate the file on your hard drive and to display the data click Load Configuration
.
When you want to reset the camera to system default, click the Restore Factory
Defaults button to reset the system. If the system
is not working properly for any reason, you can reboot the system by clicking the
Reboot Device button.
Firmware Upgrade
These settings display the Current Firmware Version and the Current Firmware Build
Number.
To do the Firmware Upgrade, locate the path of your upgrade file by clicking the browse
button and click the Upload button to upgrade the firmware.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
29
Advanced
Device Info
These settings display the Device information to you. It comprises of all the important
details regarding the phones network settings. The description is laid out in the picture
below.
Log
These settings display the Current Log of the device. Click the Clear
button to reset the log or click the Download button to download a
file in txt format.
For more monitoring features, please refer to SecurView Pro software user’s guide for
details.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
30
How to setup/access the camera remotely
You can either setup the Dynamic DNS connection via camera itself or your home
router. An account from any of the listed DDNS providers is required prior to this
operation.
Configure DDNS on your Camera
1. Go to Camera’s DDNS Setting page; click Enable to activate the feature. Then
select a DDNS provider from the list.
2. Enter your DDNS’s the Host Name, User Name and Password.
3. In the Port Number section, assign an HTTP port of the camera. The default
HTTP Port on the camera is 80. The example shows above is using port number
9000.
4. Open another web browser and go to your Router’s Web Configuration page.
(In the example, TRENDnet’s TEW-651BR Wireless N router is used)
5. Go to Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. CameraName)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
31
Then click Add to add the application.
* Please refer to your router’s user’s manual for detail Virtual Server setting.
Some router might use Port Forwarding or Special applications for this
function. The setup steps should be very similar.
6. Open another web browser and enter your DDNS domain and camera’s port
number.
http://yourDomainName:PortNumber
7. Camera’s login page will appear.
Configure DDNS on your router
1. Go to Camera’s DDNS
Ports Number section, assign a HTTP port for your
camera and click Apply.
2. Login to your router’s web configuration page.
Find the Dynamic DNS configuration section.
3. Enable DDNS, fill out the following information and then click Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
32
4. Go to Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. Camera Name)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
Click Add to add the application.
* Please refer to your router’s user’s manual for detail Virtual Server setting.
Some router might use Port Forwarding or Special applications for this
function. The setup steps should be very similar.
5. Open another web browser and enter your DDNS domain and camera’s port
number.
http://yourDomainName:PortNumber
6. The camera login page will appear.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
33
Technical Specifications
TV-IP672W
Camera
General Sensor: 1/4” CMOS Sensor
Board Lens
Focal Length: 4mm
F/No: 1.5
Minimum illumination: 1 lux
Focus Depth: 20 cm ~ infinity
View:
Horizontal: 51.8 degrees
Vertical: 33.8 degrees
Diagonal: 59.6 degrees
Digital Zoom: 4x
Audio Built-in omni-directional microphone
Sensitivity: -40dB +/- 3dB (5 meters max.)
Frequency: 100~20000Hz
S/N: >60dB
Format: PCM/ADPCM
External speaker output (speaker sold separately)
Two-way audio with echo canceling
Pan & Tilt Pan: -170° ~ +170°
Tilt: up 90°and down 25°
Auto-Patrol preset positions: 10
Hardware
Network IEEE 802.3u 10/100Mbps Auto-MDIX Fast Ethernet
LED Power, Link/Act
WPS Button Enable WPS connection
Reset Button Reset to factory default
Privacy Button Privacy mode on/off
Power Consumption Max. 10.5 watts
Power Input: 100~240V, 50/60Hz 0.5A
Output: 12V, 1.25A external power adapter
Dimension 113 x 113 x 130 mm (4.5 x 4.5 x 5.1 in.)
Weight 503 g (1.1 lb.)
Temperature
Operating: 0°C ~ 40°C (32°F ~ 104°F)
Storage: -25°C ~ 70°C (-13°F ~ 158°F)
Humidity Max. 90% (non-condensing)
Certifications CE, FCC
Requirement
Management
Interface
Internet Explorer 7.0 or above
Firefox, Safari, and Chrome
To Run software Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit)
Windows Server 2003, 2008
SecurView Pro
Software
Channel: supports up to 32 cameras
Record/Playback/Motion Detection/Audio
Network Protocols IPv4, ARP, TCP, UDP, ICMP
DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client
HTTP
Samba Client
PPPoE
UPnP
LLTD
RTP (Real Time Protocol)
RTCP (Real Time Control Protocol)
RTSP (Real Time Streaming Protocol)
3GPP (video only)
Wireless
Standard IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n
Frequency 2.4 ~ 2.483 GHz ISM band
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
34
Antenna 1 x detachable 2dBi dipole antenna (Reverse-SMA connector)
Date Rate 802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 150Mbps
Security 64/128-bit WEP, WPA/WPA2-PSK
Output Power 802.11b: 17dBm (typical)
802.11g: 15dBm (typical)
802.11n: 14dBm (typical)
Receiving Sensitivity 802.11b: -88dBm at 11Mbps
802.11g: -74dBm at 54Mbps
802.11n: -68dBm at 150Mbps
Channels 1~11 (FCC), 1~13(ETSI)
Management
System Web based administration
NIPCA support
Access Up to 20 user accounts
Backup / Restore Save/retrieve configuration files
Log System log up to 500 entries
Micro SD View, download, delete files
Format and remove Micro SD card
Settings
Image Brightness, contrast, saturation, sharpness, white balance, flip, mirror
(horizontal/vertical), black & white, indoor, outdoor, schedule mode
Shutter: 1/3.25s, 1/7.5s, 1/10s, and 1/15s
Video Setting Profile 1: H.264/ MPEG-4
- Resolution: 1280 x 800, 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 30fps
Profile 2: H.264/ MPEG-4
- Resolution: 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 30fps
Profile 3: MJPEG
- Resolution: 1280 x 800, 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 1280 x 800 @ 5fps, 640 x 400/320 x 192@30fps
- JPEG quality: Low, Fair, Standard, Good, Excellent
Profile 4: H.264/MPEG-4
- Resolution: 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 30fps
-
RTSP: http://ipcamera_ip/3gpp
3GPP Audio format/AMR
Video format/MPEG4
Protocols/RTSP, RTP, RTCP
Recording Resolution: Define individual resolution for up to 4 profiles
Required storage: 32MB (minimum per profile)
Recording type: event based (motion detection), continuous, and
scheduled
Event Action Trigger event: motion detection
Action: send real-time snapshot or video recording to FTP or email
Port Settings HTTP port: 80 (default)
RTSP port: 554 (default)
Time Synchronize with NTP server or set time / date manually
TV-IP672WI
Camera
General Sensor: 1/4” CMOS Sensor
Board Lens
Focal Length: 4mm
F/No: 1.5
Minimum illumination: 0 lux
Focus Depth: 20 cm ~ infinity
View:
Horizontal: 51.8 degrees
Vertical: 33.8 degrees
Diagonal: 59.6 degrees
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
35
Digital Zoom: 4x
Audio Built-in omni-directional microphone
Sensitivity: -40dB +/- 3dB (5 meters max.)
Frequency: 100~20000Hz
S/N: >60dB
Format: PCM/ADPCM
External speaker output (speaker sold separately)
Two-way audio with echo canceling
Pan & Tilt Pan: -170° ~ +170°
Tilt: up 90°and down 25°
Auto-Patrol preset positions: 10
Day/Night Built-in ICR
Night vision (IR) supports up to 7.5 meters
Hardware
Network IEEE 802.3u 10/100Mbps Auto-MDIX Fast Ethernet
LED Power, Link/Act
WPS Button Enable WPS connection
Reset Button Reset to factory default
Privacy Button Privacy mode on/off
Power Consumption Max. 10.5 watts
Power Input: 100~240V, 50/60Hz 0.5A
Output: 12V, 1.25A external power adapter
Dimension 113 x 113 x 130 mm (4.5 x 4.5 x 5.1 in.)
Weight 515 g (1.13 lb.)
Temperature
Operating: 0°C ~ 40°C (32°F ~ 104°F)
Storage: -25°C ~ 70°C (-13°F ~ 158°F)
Humidity Max. 90% (non-condensing)
Certifications CE, FCC
Requirement
Management
Interface
Internet Explorer 7.0 or above
Firefox, Safari, and Chrome
To Run software Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit)
Windows Server 2003, 2008
SecurView Pro
Software
Channel: supports up to 32 cameras
Record/Playback/Motion Detection/Audio
Network Protocols IPv4, ARP, TCP, UDP, ICMP
DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client
HTTP
Samba Client
PPPoE
UPnP
LLTD
RTP (Real Time Protocol)
RTCP (Real Time Control Protocol)
RTSP (Real Time Streaming Protocol)
3GPP (video only)
Wireless
Standard IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n
Frequency 2.4 ~ 2.483 GHz ISM band
Antenna 1 x detachable 2dBi dipole antenna (Reverse-SMA connector)
Date Rate 802.11b: up to 11Mbps
802.11g: up to 54Mbps
802.11n: up to 150Mbps
Security 64/128-bit WEP, WPA/WPA2-PSK
Output Power 802.11b: 17dBm (typical)
802.11g: 15dBm (typical)
802.11n: 14dBm (typical)
Receiving Sensitivity 802.11b: -88dBm at 11Mbps
802.11g: -74dBm at 54Mbps
802.11n: -68dBm at 150Mbps
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
36
Channels 1~11 (FCC), 1~13(ETSI)
Management
System Web based administration
NIPCA support
Access Up to 20 user accounts
Backup / Restore Save/retrieve configuration files
Log System log up to 500 entries
Micro SD View, download, delete files
Format and remove Micro SD card
Settings
Image Brightness, contrast, saturation, sharpness, white balance, flip, mirror
(horizontal/vertical), black & white, indoor, outdoor, schedule mode
Shutter: 1/3.25s, 1/7.5s, 1/10s, and 1/15s
Video Setting Profile 1: H.264/ MPEG-4
- Resolution: 1280 x 800, 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 30fps
Profile 2: H.264/ MPEG-4
- Resolution: 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 30fps
Profile 3: MJPEG
- Resolution: 1280 x 800, 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 1280 x 800 @ 5fps, 640 x 400/320 x 192@30fps
- JPEG quality: Low, Fair, Standard, Good, Excellent
Profile 4: H.264/MPEG-4
- Resolution: 640 x 400, 320 x 192, 160 x 96
- Max frame rate: 30fps
- RTSP: http://ipcamera_ip/3gpp
3GPP Audio format/AMR
Video format/MPEG4
Protocols/RTSP, RTP, RTCP
Recording Resolution: Define individual resolution for up to 4 profiles
Required storage: 32MB (minimum per profile)
Recording type: event based (motion detection), continuous, and
scheduled
Event Action Trigger event: motion detection
Action: send real-time snapshot or video recording to FTP or email
Port Settings HTTP port: 80 (default)
RTSP port: 554 (default)
Time Synchronize with NTP server or set time / date manually
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
37
Troubleshooting
1. The Power LED and Ethernet Activity LED do not light up.
The power supply or camera might be faulty. Check that the connection to both
the power source and the terminal on the back of the camera are secure and
that you are using the provided power supply. If the camera is otherwise
functioning correctly, the LEDs might have been disabled in the configuration.
See the section of this guide on Configuration of System settings.
2. The camera can’t be accessed or access is slow
There might be a problem with the network cable. To confirm that the cables
are working, ping the address of a known device on the network. If the cabling
is OK and your network is reachable, you should receive a reply similar to the
following (…bytes = 32 time = 2 ms).
Another possible problem may be that the network device such as a hub or
switch utilized by the Network Camera is not functioning properly. Please
confirm the power for the devices are well connected and functioning properly.
3. The camera can be accessed locally but not remotely
This might be caused by a firewall. Check the Internet firewall with your system
administrator. The firewall may need to have some settings changed in order
for the Network Camera to be accessible outside your local LAN. For more
information, please refer to the section about installing your camera behind a
router.
Make sure that the Network Camera isn’t conflicting with any Web server you
may have running on your network.
The default router setting might be a possible reason. Check that the
configuration of the router settings allow the Network Camera to be accessed
outside your local LAN.
4. White vertical lines appear on the image from the camera
It could be that the CMOS sensor (a square panel situated behind the lens
that measures the light signals and changes it into a digital format so your
computer can present it into an image that you are familiar with) has become
overloaded when it has been exposed to bright lights such as direct exposure
to sunlight or halogen lights. Reposition the Network Camera into a more
shaded area immediately as prolonged exposure to bright lights will damage
the CMOS sensor.
5. The camera images are ‘noisy’
Often if the camera is in a low-light environment, the images can contain a lot
of noise. Try enabling Night mode and see if that improves the image quality.
Otherwise, try to use the camera in a location where there is a bit more light.
6. The camera images are of poor quality.
Make sure that your computer’s display properties are set to at least 16-bit
color. Using 16 or 256 colors on your computer will produce dithering artifacts
in the image, making the image look as if it is of poor quality.
Try also adjusting the brightness, contrast, saturation, light frequency and anti-
flicker controls on the Video Settings under the Configuration menu. You may
also consider adjusting the resolution of the camera and the compression rate
to improve the image.
7. Video can’t be viewed through the web browser interface.
ActiveX might be disabled. If you are viewing the images from Internet Explorer
make sure ActiveX has been enabled in the Internet Options menu. You may also
need to change the security settings on your browser to allow the ActiveX plug-
in to be installed.
If you are using Internet Explorer with a version number lower than 6, then you
will need to upgrade your Web browser software in order to view the
streaming video transmitted by the Network Camera. Try also viewing the
video using Java. Ensure that you have the latest version of Java installed
before you do. Go to www.java.com
for more information.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
38
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to
channels 1 through 11.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Europe EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC.
The following test methods have been applied in order to prove presumption of
conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2006 +A11:2009
Safety of Information Technology Equipment
EN 62311: 2008
Assessment of electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz-300 GHz)
(IEC 62311:2007 (Modified))
EN 300 328 V1.7.1: (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band
and using spread spectrum modulation techniques; Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive
EN 301 489-1 V1.8.1: (2008-04)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common
technical requirements
EN 301 489-17 V2.1.1 (2009-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 17: Specific
conditions for 2,4 GHz wideband transmission systems
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in
all EU member states and EFTA countries, except in France and Italy where restrictive
use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in
order to obtain authorization to use the device for setting up outdoor radio links and/or
for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some
areas the RF output power may be limited to 10 mW EIRP in the frequency range of
2454 2483.5 MHz. For detailed information the end-user should contact the national
spectrum authority in France.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
39
Česky
[Czech]
TRENDnet tímto prohlašuje, že tento TV-IP672W / TV-IP672WI je
ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede TRENDnet erklærer herved, at følgende udstyr TV-
TV-IP672W / TV-IP672WI overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt TRENDnet, dass sich das Gerät TV-IP672W / TV-
IP672WI in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab TRENDnet seadme TV-IP672W / TV-IP672WI
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
English Hereby, TRENDnet, declares that this TV-IP672W / TV-IP672WI is
in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente TRENDnet declara que el TV-IP672W /
TV-IP672WI cumple con los requisitos esenciales y cualesquiera
otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ TRENDnet ΔΗΛΩΝΕΙ ΟΤΙ TV-IP672W / TV-
IP672WI ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ
ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente TRENDnet déclare que l'appareil TV-IP672W / TV-
IP672WI est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente TRENDnet dichiara che questo TV-IP672W / TV-
IP672WI è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo TRENDnet deklarē, ka TV-IP672W / TV-IP672WI atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to
saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo TRENDnet deklaruoja, kad šis TV-IP672W / TV-IP672WI
atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Nederlands
[Dutch]
Hierbij verklaart TRENDnet dat het toestel TV-IP672W / TV-
IP672WI in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, TRENDnet, jiddikjara li dan TV-IP672W / TV-IP672WI
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, TRENDnet nyilatkozom, hogy a TV-IP672W / TV-IP672WI
megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym TRENDnet oświadcza, że TV-IP672W / TV-IP672WI jest
zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
TRENDnet declara que este TV-IP672W / TV-IP672WI está
conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Slovensko
[Slovenian]
TRENDnet izjavlja, da je ta TV-IP672W / TV-IP672WI v skladu z
bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Slovensky
[Slovak]
TRENDnet týmto vyhlasuje, že TV-IP672W / TV-IP672WI spĺňa
základné požiadavky a všetky príslušné ustanovenia Smernice
1999/5/ES.
Suomi
[Finnish]
TRENDnet vakuuttaa täten että TV-IP672W / TV-IP672WI
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar TRENDnet att denna TV-IP672W / TV-IP672WI
står I överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
© Copyright 2013 TRENDnet. All Rights Reserved.
40
TRENDnet User’s Guide
Limited Warranty
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TV-IP672W / TV-IP672WI3 Years Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period,
TRENDnet shall reserve the right, at its expense, to repair or replace the defective
product or part and deliver an equivalent product or part to the customer. The
repair/replacement unit’s warranty continues from the original date of purchase. All
products that are replaced become the property of TRENDnet. Replacement products
may be new or reconditioned. TRENDnet does not issue refunds or credit. Please
contact the point-of-purchase for their return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product by any unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable
warranty period and providing a copy of the dated proof of the purchase. Upon proper
submission of required documentation a Return Material Authorization (RMA) number
will be issued. An RMA number is required in order to initiate warranty service support
for all TRENDnet products. Products that are sent to TRENDnet for RMA service must
have the RMA number marked on the outside of return packages and sent to TRENDnet
prepaid, insured and packaged appropriately for safe shipment. Customers shipping
from outside of the USA and Canada are responsible for return shipping fees. Customers
shipping from outside of the USA are responsible for custom charges, including but not
limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE
OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST
OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL
OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Some TRENDnet products include software code written by third party developers.
These codes are subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com
Download section
and look for the desired TRENDnet product to access to the GPL Code or LGPL Code.
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of
the developers. TRENDnet does not provide technical support for these codes. Please go
to
http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for
specific terms of each license.
V1.0R / 5.2.2012
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trendnet TV-IP672W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trendnet TV-IP672W in de taal/talen: Engels als bijlage per email.

De handleiding is 4,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info