51
4 DISASSEMBLE INSTRUCTIONS
Disassemble steps:
Be sure to turn off the machine and disconnect the power before disassembling.
1. Unscrew the disc nut in a counterclockwise direction and take out the disc.
2. Take out the extruding axle and extruding head.
3. Press the top cover hook, lift the end surface of top cover, and remove it.
4. Unlock the fastening plate in a counterclockwise direction.
5. Take out the mixing axle.
6. Take out the mixing bowl.
Assemble steps:
Be sure to turn off the machine and disconnect the power before assembling.
1. Mount mixing bowl on the body, insert mixing axle into exposed motor shaft in mixing bowl with
pointing to the hexagon holes. lf it is cocked, rotate the mixing axle slighting, it will be successfully
installed to right place.
2. Lock the fastening plate in a clockwise direction.
3. Insert the extruding axle.
4. Fix the disc in on the extruding head.
5. Fix the extruding head to the fastening plate.
6. Tighten the disc nut in a clockwise direction.
7. Insert top cover into housing with bayonet pointing to hole in front of the mixing bowl. Press it
down, finish assembly with a click sound.