5
Electrical hazard
Switch off camera if a foreign body or liquid has entered the camera. Wait
until completely dry, as otherwise danger of fire and electrocution.
Switch off camera if housing is damaged, as otherwise danger of fire and
electrocution.
The camera may not be dismantled, modified or repaired, as otherwise
danger of fire and electrocution.
Use the supplied USB power supply and only with the rated mains
voltage specified on the rating plate, as otherwise danger of fire and
electrocution.
To disconnect the camera from the mains pull power supply connector
out of socket. The connected USB power supply can continue to consume
power and represent a hazard source.
The USB power supply may not be used during a thunder storm, as
otherwise danger of electrocution.
Damage from heat – fi re hazard
Do not leave camera in places that are susceptible to considerable incre-
ases in temperature (e.g. in a vehicle). The housing and internal parts may
be damaged, which in turn could cause a fire.
Do not wrap up camera or place on textiles. This could produce a build-
up of heat in the camera that could cause deformation of the housing
and may represent a fire hazard.
Hazards of using lithium-ion batteries
The battery is an integral part of the camera and cannot be replaced.
Danger of explosion in case of incorrect removal of the battery.
