In the event that heater should extinguish itself, without any action or your part, you
should look to the digital indicator for any of the following messages.
MESSAGE
(Digital Indicator)
MESSAGE MEANING
e-0
f-0
e- 1
f- 1
e-2
e-5
e-6
e-7
e-8
e-9
Temperature within the heater too high.
Power interrupted. You can re-ignite the heater.
Thermostat is broken or disconnected. Contact your
dealer.
Faulty burner thermistor. Contact your dealer.
Primary flame rod is malfunctioning and /or dirty.
You have accidentaly activated your safety tip-over
switch. You should reset this device as described, press
the “OFF” button and restart your heater.
Burner flame has been extinguished during operation.
Check to see if air filter is clogged with dust. If so, clean
air filter.
Room temperature above 28°C
Failure of blower motor.
Air filter dirty; or Fuel pump dirty.
Out of fuel. Refill removable fuel tank.
Too little ventilation. Ventilate better.
The heater has been in operation continuously for a
period of 69 hours and has turned itself off
automatically. Switch the heater back on.
-- :--
(& blinking FUEL-light)
-- :--
(& blinking VENT-light)
