603761
16
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
16
6
7
4
From the inside, pass the thread
end through the hole in the
bobbin, as shown.
Place the bobbin on to the
thread winding spindle so the
groove will meet the shaft
projection.
Hold the thread end, and push the thread
winding switch to the left to start winding.
After winding a little, release the thread
winding switch so that it returns to the right
and stops winding.
Note: The thread is wound only while the
thread winding switch is pushed to
the left.
5
Thread
Shaft projection
Thread winding
spindle
Groove
right wrong
To stop winding the thread, release the
thread winding switch.
Attention
Do not wind excessively,
it causes sewing
malfunction.
Cut the thread.
Remove the bobbin from the spindle.
Hole
8
Cut extra thread above the bobbin hole.
Push the thread winding switch to the
left again.
Wind the thread to the amount you need.
9
10
11
Bobbin
Attention
If the thread tail remains
from the bobbin hole, please
cut it, otherwise sewing will
not be performed correctly.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toyota ECO34B - SP20 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toyota ECO34B - SP20 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Toyota ECO34B - SP20

Toyota ECO34B - SP20 Gebruiksaanwijzing - Nederlands - 51 pagina's

Toyota ECO34B - SP20 Gebruiksaanwijzing - Deutsch - 51 pagina's

Toyota ECO34B - SP20 Gebruiksaanwijzing - Français - 51 pagina's

Toyota ECO34B - SP20 Gebruiksaanwijzing - Espanõl - 51 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info