Usingthemenus(Continued)
■ Thedefaultsettingmenu
This menu shows placement status and other settings.
Item
Description
Projection
mode
Sets projection mode in accordance with Placement Style.
p.21
(Standard)
(Rear)
(Ceiling)
(Rear ceiling)
Auto input
search
Sets whether the input source with signals is only selected or not.
On Off
Language
Select one of the languages below to use for displaying the menu
and messages
[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/Português/ /
Svenska/Türkçe/Română/ / /Polski/
BahasaIndonesia/Norsk/Suomi/Čeština/Magyar/
Ελληνικά
/Dansk/
Nederlands
Start-up
screen
Sets whether the start-up screen displays when power is turned on.
On Off
Fanmode
Sets the cooling fan speed.
Standard High
Lamp
power
Sets the lamp power.
Standard Low
Power on
Sets whether to turn on the power when the ON/STANDBY button is
pressed (Manual), or when the power cord is plugged in (Auto).
Manual Auto.
Detailed description
[Autoinputsearch]
Automatically searches the input source that can be projected, and switches source
from the connected device each time the INPUT button is pressed. If the connected
device outputs no source signal, the input is skipped. When the source signal is
stopped during projecting, it will switch to the other inputs automatically. If no input
sources are detected, it will stop searching and “No signal” message will appear.
[Fanmode]
Setting [Fanmode] to [High] increases the cooling fan speed. (The cooling fan
noise gets louder.) Set this option to use the projector, for example, at high altitude
(over 1,500m or 5000 ft. above sea level).
[Lamppower]
When [Lamppower] is set to [Low], the screen becomes a little darker, but the
cooling fan noise gets quieter.
[Poweron]
If [Poweron] is set to [Auto] and there is a power outage, the projector will come
on once power is restored.
