3
Pull the fuser unit lock control lever (blue)
in the direction of the arrow.
4
Grip the handle of the fuser unit, pull it out
carefully, and place it on a flat surface.
• Make sure the fuser unit does not hit the LED head.
5
Pull the jam release lever downward, and
slowly pull the jammed paper out in the
direction of the arrow (toward you).
6
Hold the handle of the fuser unit, and gently
replace it inside the device.
7
Push the fuser unit lock control lever (blue)
toward the back to lock it in place.
8
Close the top cover.
9
Return the document holder to its original
position. Press the top of the document
holder into place.
This completes the procedure.
Note
• After removing jammed paper from the fuser unit, print
several blank pages, as stray toner is sometimes left
inside the fuser unit.
Warning The fuser unit can be extremely hot,
and there is a risk of getting burned.
