681687
29
Verklein
Vergroot
Pagina terug
1/75
Pagina verder
Copying
4.
2
3
Press
OK
to save the selection.
Changing the default settings
The copy options, including darkness, original type, copy size
and number of copies, can be set to the most frequently used
modes. When you copy a document, the default settings are
used unless they are changed by using the menus on the
control panel.
To create your own default settings:
1
Press
Menu
until
Copy Setup
appears on the top line of
the display.
2
Press
OK
when
Default-Change
appears.
3
Press the scroll button ( or ) to select a setup option
and press
OK
.
4
Press the scroll button ( or ) to change the setting or
enter the value and press
OK
.
5
Repeat steps 3 through 4, as needed.
6
Press
Stop/Clear
to return to Standby mode.
NOTE
: While you are setting copy options, pressing
Stop/
Clear
cancels the changed settings and restores their default
status.
Using special copy features
Clone copying
This feature prints multiple image copies from the original
document on a single page. The number of images is
automatically determined by the original image and paper size.
1
Place the document to be copied on the document glass,
and close the cover.
2
Press
Menu
until
Special Copy
appears on the top line of
the display.
3
Press the scroll button ( or ) until
Clone
appears and
press
OK
.
4
Customize the copy settings including copy size, darkness,
and original type, by using the control panel buttons. See
page 4.1.
NOTE
: You cannot adjust the copy size using the
Reduce/
Enlarge
menu while making a clone copy.
5
Press
Start
to begin copying.
Auto Fit copying
This feature automatically reduces or enlarges the original
image to fit on the paper currently loaded in the machine.
NOTE
: When the size of the document you want to copy is not
same as the size of the paper loaded, this function
automatically adjusts the size of the document to fit the paper.
You can not adjust the copy size manually.
1
Load the document to be copied on the document glass,
and close the cover.
2
Press
Menu
until
Special Copy
appears on the top line of
the display.
3
Press the scroll button ( or ) until
Auto Fit
appears and
press
OK
.
4
Customize the copy settings including copy size, darkness,
and original type, by using the control panel buttons. See
page 4.1.
NOTE
: You cannot adjust the copy size using the
Reduce/
Enlarge
menu while Auto Fit copying is enabled.
5
Press
Start
to begin copying.
ID Card copying
You can copy both sides of the ID Card like a drivers licence to
a single side of paper.
When you copy using this feature, the machine prints one side
of the card on the upper half of the paper and the other side on
the lower half without reducing the size of the original.
If the loaded card is larger than the printable area, some
portions may not be printed.
1
Place the ID Card to be copied on the document glass and
close the cover.
2
Press
Menu
until
Special Copy
appears on the top line of
the display.
3
Press the scroll button ( or ) until
ID Card copy
appears and press
OK
.
4
Customize the copy settings including copy size, darkness,
and original type, by using the control panel buttons. See
page 4.1.
5
Press
Start
to begin copying.
Your machine begins scanning the front side and will then
display
Set Backside
.
6
Open the document cover and flip the document over.
Close the cover.
A
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba e-STUDIO 180s bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba e-STUDIO 180s in de taal/talen: Engels als bijlage per email.

De handleiding is 2,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Toshiba e-STUDIO 180s

Toshiba e-STUDIO 180s Snelstart handleiding - Nederlands - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info