485654
30
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
58 59
Operations
The Setting 3 menu
Item
p
q
Description
Power on
Select the power on mode. Press and select the power on mode using
p
q
.
Manual—the projector must be powered on manually using the control panel or remote.
Auto—the projector powers on automatically when the main power switch is turned on.
No signal
power off
Sets the time to wait for the power to be turned off after the last operation is made with
no input signal. Press
and select the lamp interval using
p
q
.
Off/5 min./10 min./20 min./30 min.
Screen trigger
Enable or disable the screen trigger function. Press and select On or Off using
p
q
.
Fan mode
Select the desired fan mode. Press and select the fan mode using
p
q
.
Standard/High
Default input
select
Select the image source that the projector will search for automatically on startup. Press
and select the default input device using
p
q
.
Last source/Auto./Computer1/Computer2/Computer3/Y-PB-PR/Video/S-video
Video mode
Video: Press and select the default video mode using
p
q
.
Auto./NTSC/PAL/SECAM
S-video: Press
and select the default S-video mode using
p
q
.
Auto./NTSC/PAL/SECAM
Message
Enable or disable the onscreen warning and informational messages. Press and select On
or Off using
p
q
.
Filter warning
Set the interval between lter cleaning warning messages. Press and select the desired
interval using
p
q
.
Off/100H/200H/500H/1000H
Search mode
Set the search mode. Press and select the desired search mode using
p
q
.
Standard/Fine
Note
If [Power on] is set to [Auto] and there is a power outage, the projector will come on
once power is restored.
Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise
gets louder.) Set this option to use the projector, for example, at high altitude (over 1,200
meters above sea level).
Do not set Fan mode to [High] when using the projector at a lower altitude.”
Using the Setting menus (Continued)
The Status display screen provides a quick access to the detailed information on projector status.
The Status display menu contains four distinct tabs; Usage time, Input, Network, and Version.
Note
Information on the Status display screens is read only.
The Usage time screen
Item
p
q
Description
Lamp1 Displays the Lamp1 life remaining as a percentage.
Lamp2 Displays the Lamp2 life remaining as a percentage.
Lamp1 time Displays the Lamp1 total usage in hours.
Lamp2 time Displays the Lamp2 total usage in hours.
PJ time Displays the projector's total usage in hours.
Filter time Displays the lter total usage in hours.
Note
Displays [Lamp 1/2 time] as a measure of when the lamp should be replaced. (Cannot be
used as a counter of guaranteed lamp time.) When the displayed time approaches 2,000
hours, consult with a dealer about getting replacement for:
TLPLW25 for TDP-WX5400 (sold separately).
The Input screen
Item
p
q
Description
Input name Displays the input terminal that is currently being used.
Signal Displays the signal name of the currently being used.
H-sync. freq. Displays horizontal frequency in KHz
V-sync. freq. Displays vertical frequency in Hz
Video mode Displays video type, if present.
Sync Displays synchronization type.
Sync polarity Displays sychronization polarity.
Scan type Displays the scan type.
Using the Status display screen
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba TDP-WX5400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba TDP-WX5400 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info