VCR Functions
Recording a Programme
with Automatic Stop
This function enables you to record up to nine hours
(LP) of programmes.
Your DVD-VCR stops automatically after the requested
length of time.
1
Switch on the television.
2
Insert the cassette on which the programme is to be
recorded, with the window visible and the safety tab
intact or the opening covered with adhesive tape.
The DVD-VCR is switched on automatically.
3
Select the station to be recorded by pressing the
PROG or button or select the source (AV1,
AV2, or AUX) by pressing the INPUT SEL. button
for a satellite tuner or external video source.
The station number is displayed and the
programme can be seen on the television.
4
Select the recording speed by pressing the SPEED
button (refer to page 26).
5
Hold down the REC (
●
) button for a while to start
recording.
The record indicator appears on the television
screen and DVD-VCR display. An index is
recorded on the tape (refer to page 34).
6
Press the REC (
●
) button several times to
increase the recording time in:
• 30-minute intervals up to four hours
• 1-hour intervals up to nine hours
The length is displayed on the television displays.
The selected programme is recorded for the length
of time requested. At the end of that time, the
DVD-VCR stops recording automatically and
power off.
7
If you wish to cancel the recording before the end,
press the ON/STANDBY button.
• If the end of the tape is reached while recording,
the recording stops and power off.
LENGTH 2:30
SET LENGTH :
PRESS REC
●
Recording a Programme
Immediately
Before recording a programme, you must have preset
the corresponding station (unless you are recording via
an external video source). If you have not done so, refer
to pages 15~19.
1
Switch on the television.
2
Insert the video tape in to the VCR deck, with the
window visible and the safety tab intact or the
opening covered with adhesive tape. The DVD-
VCR is switched on automatically.
3
Select the station by pressing the PROG or
button or select the source (AV1, AV2, or AUX) by
pressing the INPUT SEL. button for a satellite
tuner or external video source. The station number
is displayed and the programme can be seen on
the television.
4
Select the recording speed by pressing the
SPEED button as many times as required (refer to
page 26).
5
Hold down the REC (
●
) button for a while to start
recording.
The record indicator appears on the television and
DVD-VCR display. An index is recorded on the
tape (refer to page 34).
6
To stop recording, press the
■
button once.
• If your DVD-VCR ejects the cassette when you
start recording, check to make sure that the
cassette’s safety tab is intact or that the opening
(created by a broken safety tab) is covered with
adhesive tape.
• If you reach the end of the tape while recording,
the cassette rewinds automatically.
