35405
29
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
- 29 -
ENG
In RESUME (Pre-Stop) mode, some pages and some items
cannot be accessed. On the MAIN page, you cannot
access VIDEO SETUP and PARENTAL SETUP pages in
RESUME mode.
USING SUB MENUS
Use 3/4 arrow buttons to switch between left and right
menus.
Once you enter any submenu,
Use 6/5 arrow buttons to move the highlighted position
up and down.
Press ENTER to choose the highlighted option on the right
menu.
To close the setup menu, press SETUP/DISP.
MENU ITEMS
VIDEO SETUP
VIDEO SETUP page will not be available if the player is in
RESUME (Pre-Stop) mode.
TV DISPLAY:
The aspect ratio of the picture provided by the DVD player
can be varied in line with the features available on the TV
in use.
The options available are:
NORMAL / PS (4:3 Pan & Scan):
Allows you to see the movie fill the entire screen of your
TV, but not the right and left edges. This type of picture can
only be viewed, if it is contained on the disc.
NORMAL / LB (4:3 Letterbox):
Allows you to see movies in their original aspect ratio. You
will see the entire frame of the movie, but it will occupy a
smaller portion of the screen.
WIDE (Wide screen 16:9):
Choose this setting if your DVD player is connected to a
wide-screen TV.
¥ NOTE:
Depending on the format of the DVD disc. (eg. 2.35:1), the
picture may still have black lines above and below this
picture.
TV TYPE:
The video standard of the DVD player output can be
selected from MULTI. SYSTEM”, NTSC” or “PAL”.
IfMULTI. SYSTEMis selected, the output standard will be
either NTSC or PAL depending on the DVD being played.
IfNTSCis selected, the video output will be converted to
NTSC standard irrespective of disc standard.
If PAL is selected, the video output will be converted to
PAL standard irrespective of disc standard.
VIDEO OUTPUT
The Video output of the DVD player can be selected as
“CVBS”, “Y/PB/PR”, “RGB” or “PROGRESSIVE”.
Select CVBSif you connect the DVD player to the TV via
RCA output.
SelectY/PB/PRif you connect the DVD player
corresponding to your TV which has YPBPR (Component
Video) inputs that supports the interlaced mode. See page
15 for Component Video (YPBPR) connection.
SelectRGB” if you connect the DVD player to the TV via
scart socket. Scart output will be CVBS + RGB. This is the
factory setting of the DVD player.
Select “PROGRESSIVE” if you connect the DVD Player
corresponding to your TV which has YPBPR (Component
Video) inputs that supports the progressive scan mode.
See page 15 for Component Video (YPBPR) connection.
WARNING:
To be able to see the progressive video correctly, you should
have a progressive scan TV and should make the video
connections correctly.
1. Highlight “PROGRESSIVE” in the VIDEO OUTPUT menu
and press ENTER.
2. The “VIDEO SETTING IS CHANGED KEEP THIS SETTING?”
message will be displayed on screen.
3. If you see the picture correctly, select “OK and press
ENTER.
4. If you cannot see the picture correctly, select “CANCEL”
and press ENTER.
¥ NOTE:
If your TV set does not have a progressive scan feature,
nothing will be displayed on screen when “PROGRESSIVE”
is selected.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba SD-260ESE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba SD-260ESE in de taal/talen: Engels als bijlage per email.

De handleiding is 1,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info