560896

Toshiba 48T5435 Handleiding

12
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
ON-LINE MANUAL
48T543*DG
LED Backlight LCD TV
During the life of your TV rmware updates will be made available to
ensure that your TV maintains optimum performance.
You can download the latest version of rmware from
www.toshiba-om.net/rmware.php
Some features listed in this document are limited due to local legislation
and may not be available in all countries.
Contents
English - 2 -
English
Safety Precautions ................................................. 4
Air Circulation ..................................................... 4
Heat Damage...................................................... 4
Mains Supply ...................................................... 4
Warning .............................................................. 4
Do ....................................................................... 4
Do not ................................................................. 4
Installation and Important Information .................... 5
EXCLUSION CLAUSE........................................ 5
Important safety information ................................... 6
Fitting or Removing the pedestal stand .................. 7
The Remote Control ............................................... 8
Inserting Batteries and Effective Range of the
Remote Control................................................... 8
Connecting External Equipment ............................. 9
Connecting an HDMI
®
or DVI Device to the HDMI
Input...................................................................... 10
To Connect an HDMI Device ............................ 10
To Connect a DVI Device.................................. 10
Connecting a Computer.........................................11
To Connect a Computer .....................................11
Connecting to a DVD Player via YPbPr .............11
Connecting a USB Memory ...................................11
To Connect a USB Flash Drive ..........................11
Connecting a home network ................................. 12
Power Save Mode ................................................ 13
Environmental Information ............................... 13
Controlling the TV ................................................. 14
Switching on ..................................................... 14
Using the Remote Control ................................ 14
Using the Controls on the TV ............................ 14
Initial Installation ................................................... 15
Auto Tuning .......................................................... 17
Auto Tuning....................................................... 17
Auto Channel Scan Menu Operation ................ 17
Manual Tuning, Analogue Fine Tuning ................. 18
Digital Aerial Manual Search............................. 18
Digital Cable Manual Search ............................ 18
Analogue Manual Search ................................. 18
Analogue Fine Tune.......................................... 18
Clear Service List (*) ......................................... 18
General Operation ................................................ 19
Stereo and Bilingual Transmissions.................. 19
Displaying Subtitles .......................................... 19
Viewing Main Menu .......................................... 19
Controlling Volume and Muting Sound ............. 19
Selecting Programme Positions........................ 19
Standby Notications ........................................ 19
Channel List, Sorting Programmes, Programme
Locking ................................................................. 20
Viewing Channel List ........................................ 20
Moving a Channel ............................................. 20
Deleting a Channel ........................................... 20
Renaming a Channel ........................................ 20
Locking a Channel ............................................ 20
Viewing Info Banner, Electronic Programme
Guide .................................................................... 21
Viewing Info Banner .......................................... 21
Electronic Programme Guide............................ 21
Language Selection .............................................. 22
Language Settings ............................................ 22
Preferred ....................................................... 22
Current .......................................................... 22
Digital Settings - Parental Control, Menu Lock, Set
PIN........................................................................ 23
Viewing Parental Control Menu ........................ 23
Menu Lock ........................................................ 23
Maturity Lock .................................................... 23
Child Lock ......................................................... 23
Set PIN ............................................................. 23
Conguring Picture Settings ................................. 24
Conguring Picture Settings ............................. 24
Operating Picture Settings Menu Items ............ 24
3D Settings ....................................................... 24
Mode ................................................................. 24
Contrast ............................................................ 24
Brightness ......................................................... 24
Sharpness......................................................... 24
Colour ............................................................... 24
Power Save Mode ............................................ 24
Backlight ........................................................... 24
Noise Reduction ............................................... 24
Advanced Settings ........................................ 24
Reset ................................................................ 25
Changing Picture Format...................................... 26
Conguring PC Picture Settings ........................... 27
PC Picture Settings (*) ...................................... 27
PC Picture controls ........................................... 27
PC Position ....................................................... 27
Autoposition ...................................................... 27
H Position ......................................................... 27
V Position.......................................................... 27
Dot Clock .......................................................... 27
Phase................................................................ 27
Conguring Sound Settings .................................. 28
Conguring Sound Settings .............................. 28
Operating Sound Settings Menu Items ............. 28
Volume .............................................................. 28
Equalizer (Only for speaker) ............................. 28
Balance (Only for speaker) ............................... 28
Headphone ....................................................... 28
Sound Mode ..................................................... 28
AVL ................................................................... 28
Headphone/Lineout .......................................... 28
Dynamic Bass ................................................... 28
Surround Sound................................................ 28
Digital Out ......................................................... 28
Settings Menu Operation, Conditional Access ..... 29
Conguring Your TV’s Settings ......................... 29
Contents
English - 3 -
English
Viewing Settings Menu ..................................... 29
Using a Conditional Access Module ................. 29
Viewing Conditional Access Menu (*) ............... 29
Setting Timers....................................................... 30
Timers ............................................................... 30
Setting Sleep Timer .......................................... 30
Setting Programme Timers ............................... 30
Adding a Timer.................................................. 30
Editing a Timer .................................................. 30
Deleting a Timer................................................ 30
Recording Conguration ....................................... 31
Recording Conguration ................................... 31
Setting Date/Time ................................................. 32
Conguring Date/Time Settings ........................ 32
Conguring Source Settings ............................. 32
Input Selection .................................................. 32
Other Controls ...................................................... 33
Conguring Other Settings - General ............... 33
Operation .......................................................... 33
Menu Timeout ................................................... 33
Scan Encrypted Channels ............................... 33
Hbb TV .............................................................. 33
Blue Background .............................................. 33
Software Upgrade ............................................. 33
Application Version ........................................... 33
Hard of Hearing ................................................ 33
Audio Description.............................................. 33
Auto TV Off ....................................................... 34
Standby Search (optional) ............................... 34
Store Mode ....................................................... 34
Media Renderer ................................................ 34
Power Up Mode ................................................ 34
Virtual Remote .................................................. 34
CEC .................................................................. 34
CEC Auto Power On ......................................... 34
Network Settings, Portal, Internet Browser and
YouTube ............................................................... 35
Conguring Network Settings ........................... 35
First enter to Toshiba Portal .............................. 35
Using the Toshiba Portal ................................... 35
Using the Internet Browser ............................... 35
Using YouTube
TM
.............................................. 36
Using 3D Feature ................................................. 37
Operating the 3D Mode “
3D
” ......................... 37
LITHIUM BATTERY CAUTION ......................... 37
Using the 3D Eyewear ...................................... 37
Viewing 3D images ........................................... 37
Changing 3D format from the Quick menu ....... 37
Watching 3D images in 2D format .................... 37
Watching 2D images in 3D format .................... 37
Switching left and right images ......................... 37
3D Settings ....................................................... 38
3D Viewing Information ..................................... 38
USB Record Feature ............................................ 40
Instant Recording.............................................. 40
Timeshift Recording .......................................... 40
Watching Recorded Programmes .................... 40
Slow Forward .................................................... 40
About the USB Record Feature ........................ 40
Using Media Browser ........................................... 41
Manual Start ..................................................... 41
Auto Start .......................................................... 41
Playing MP3 Files ............................................. 42
Viewing JPEG Files .......................................... 42
Slideshow Feature ............................................ 43
Video Playback ................................................. 43
Recordings........................................................ 44
Media Browser Settings .................................... 44
Using MENU button in Media Browser Mode ... 45
To Close the Media Player ................................ 45
Analogue Only Text Services ................................ 46
Analogue Text Services .................................... 46
Using Text Button -TEXT .................................. 46
Acessing Sub-Pages ........................................ 46
Revealing Concealed Text ................................ 46
Holding a Page ................................................. 46
To display an initial page................................... 46
Appendix A: PC Input Typical Display Modes ....... 47
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 48
Appendix C: PIN Information ................................ 49
Appendix D: Supported File Formats for USB
Mode..................................................................... 50
Cautions for 3D..................................................... 51
Important information for 3D viewing ................ 51
Cautions and Other Information for 3D................. 52
Notes on watching the TV ................................. 52
Specications and Accessories ............................ 53
License Information .............................................. 54
Q & A Section ....................................................... 55
English - 4 -
English
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment,
care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
They are of a general nature, intended to help with all electronic consumer products.
Air Circulation
Leave more than 10cm around all edges when wall mounting
the television to allow adequate ventilation. This will prevent
overheating and possible damage to the television. Dusty
places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct sunlight
or near a heater. Avoid places subject to extremely high
temperatures or humidity, or locations where the temperature
is likely to fall below 5°C (41°F).
Mains Supply
The set should be operated only from a 220-240 V AC 50
Hz outlet. DO ensure that the television is not standing on
the mains lead. DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio Interference
Filter, the removal of which will impair its performance. It
should only be replaced by a correctly rated and approved
type. IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Warning
To prevent the spread of re, keep candles or other open
ames away from this product at all times.
Do
DO read these operating instructions before you attempt to
use the equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and inter connections between pieces
of equipment) are properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw the mains
plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with any glass panels or doors on equipment.
Do not
DON’T remove any xed cover as this may expose dangerous
voltages.
DON’T obstruct the ventilation openings of the equipment
with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage.
DON’T allow electrical equipment to be exposed to dripping
or splashing or objects lled with liquids.
DON’T place hot objects or naked ame sources, such as
lighted candles or nightlights on, or close to equipment. High
temperatures can melt plastic and lead to res.
DON’T use makeshift stands and use the stand manufacturers
supplied screws.
DON’T leave equipment switched on when it is unattended,
unless it is specically stated that it is designed for unattended
operation or has a standby mode. Switch off by withdrawing
the plug, make sure your family know how to do this.
Special arrangements may need to be made for people with
disabilities.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or it is damaged in any way
- switch off, withdraw the mains plug and consult your dealer.
WARNING - excessive sound pressure from earphones or
headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially children,
push or hit the screen, push anything into holes, slots
or any other openings in the case.
NEVER guess or take chances with electrical equipment
of any kind - it is better to be safe than sorry.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Note: Interactive video games that involve shooting a “gun”
type of joystick at the on-screen target may not work with
this TV.
The illustrations and the OSD in this operation
manual are for explanation purposes and may vary
slightly from the actual operations.
English - 5 -
English
Installation and Important Information
Where to install
* Button and stand
style is dependent on
model.
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for comfortable
viewing. Use curtains or blinds to prevent direct sunlight falling
on the screen.
Place the TV on a stable, level surface that can support the
weight of the TV. In order to maintain stability and prevent it
falling over, its recommended to secure the TV to a wall using
a sturdy tie on the back of the stand.
The LCD display panels are manufactured using an extremely
high level of precision technology; however, sometimes some
parts of the screen may be missing picture elements or have
luminous spots. This is not a sign of a malfunction.
Make sure the television is located in a position where it cannot
be pushed or hit by objects, as pressure will break or
damage the screen. Also, please ensure that small items are
not inserted into slots or openings in the case.
Avoid using chemicals (such as air refreshers,
cleaning agents, etc.) on or near the TV pedestal.
Studies indicate that plastics may weaken and crack
over time from the combination effects of chemical agents
and mechanical stress (such as weight of TV). Failure to
follow these instructions could result in serious injury and/or
permanent damage to TV and TV pedestal.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with
a soft, dry cloth. We recommend that you do not use any
proprietary polishes or solvents on the screen or cabinet as
this may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section
during the rst time installation menu. Depending on country/area, some of this television’s functions may not
be available. Reception of future additional or modied services cannot be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computer displays,
video games, on screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at
the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.
Regular use of other size modes will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the
owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following, loss of prot, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
English - 6 -
English
Important safety information
• Any function related to the digital television (with the DVB logo) is available only within the country or area
where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C signal
in the area where you live.
• Even if the television conforms to the required DVB - T/C specications, the compatibility with future digital
DVB - T/C transmissions is not guaranteed.
• Some digital television functions may not be available in certain countries.
• The DVB - T/C system present in this device, allows reception of both FTA (Free To Air) and Encrypted
channels.
• Note; Encrypted channels require a specic encryption system to view, which may not be available in certain
countries.
• DVB is a registered trademark of the DVB Project. The DVB logo indicates that the product is compliant
with European Digital Broadcasting.
IMPORTANT INFORMATION
TV Installation
• Do not stand the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• Always hold the plug when disconnecting the unit from the socket outlet. Do not pull on ex. The ex can
become damaged and cause a short circuit.
• Use a soft, dry cloth to clean the unit.
• Set up unit so that no one will trip over the ex.
• If you intend to wall mount the unit, contact the shop where you purchased the unit for advice, and leave the
installation work to professionals. Improper installation can cause damage and/or injuries.
• To protect the unit during a thunder storm, unplug the AC power cord and disconnect the aerial, cable and
satellite decoder/systems etc.
Caution: Do not touch the aerial connector.
• The unit becomes warm when in operation. Do not place any covers or blankets on the unit in order to
prevent overheating.
• The ventilation holes should not be blocked. Do not set up near radiators. Do not place in direct sunshine.
• Moisture condensation occurs in the following situations:
- When you move the unit from a cold place to a warm place.
- When you use the unit in a room where the heater was just turned on.
- When you use the unit in an area where cold air from an air conditioner directly hits the unit.
- When you use the unit in a humid place.
• Never use the unit when moisture condensation could occur.
• Using the unit when moisture condensation exists may damage its own internal parts. Allow two or three
hours, the unit will warm up and moisture will be evaporated before switching on.
English - 7 -
English
Fitting or Removing the pedestal stand
Fitting or Removing the pedestal stand
(1) Carefully lay the front of the unit face down on a at, cushioned surface with the stand hanging over the edge.
(2) To t the stand use the screws supplied.
or
(3) Remove the screws xing the pedestal stand
(4) After the screws are removed, hold the pedestal stand in place, then remove the pedestal stand and the
plastic moulding from the TV.
Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
For 48T543*DG model
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight of the LCD TV and two people are required for
the installation.
(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(2) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
English - 8 -
English
The Remote Control
Simple at-a-glance reference of the remote control. The supplied type is model dependant.
18. Play
19. Subtitle on-off (in Media
Browser mode and in DVB
channels)
20. Stop
21. Rapid advance
22. Image size
23. My button 2(*)
24. Teletext / Mix (in TXT
mode)
25. Electronic programme
guide(in DVB channels)
26. Exit
27. Internet portal
28. Info / Reveal (in TXT
mode)
29. Programme Down /
Page up -
Programme Up / Page
down
30. Previous programme
31. AV / Source selection
(*) MY BUTTON 1 & MY BUTTON 2
These buttons may have default functions depending on the model.
However you can set a special function to these buttons by pressing on
them for ve seconds when on a desired source or channel. A conrmation
message will be displayed on the screen. Now the selected MY BUTTON
is associated with the selected function.
Note that if you perform rst time installation, MY BUTTON 1&2 will return
to their default function.
1. Standby
2. Numeric buttons
3. 3D Settings
4. Mute
5. Volume Up / Down
6. Menu on-off
7. Navigation buttons
(Up/Down/Left/Right)
8. Okay (Conrm) / Hold (in
TXT mode) / Channel List
9. Return / Index page (in
TXT mode)
10. Media Browser
11. Quick Menu
12. My button 1(*)
13. Coloured buttons
14. Mono/Stereo - Dual I-II /
Current Language
(in DVB channels)
15. Rapid reverse
16. Programme recording
17. Pause / Timeshift recording
Inserting Batteries and Effective Range of the Remote Control
Remove the back cover to reveal the battery compartment and make sure
the batteries are inserted the right way round. Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types.
Remove exhausted batteries immediately to prevent acid from leaking into
the battery compartment. Dispose of them in a designated disposal area.
Warning: Batteries must not be exposed to excessive heat such as sunshine,
re or the like.
The performance of the remote control will deteriorate beyond a distance
of ve metres or outside an angle of 30 degrees from the IR receiver. If the
operating range becomes reduced the batteries may need replacing.
1.
3.
2.
English - 9 -
English
Connecting External Equipment
Before connecting any external equipment, remove the mains plug from the wall socket.
Side View
COMMON INTERFACE
The Common Interface is
for a Conditional Access
Module (CAM).
YPbPr Video Inputs
Headphone
SIDE AV
Side HDMI Input (*)
USB Input (*)
USB Input (*)
RGB/PC
Input
SCART
Sockets
Digital Audio
Socket (optical)
LAN Input
HDMI Input
Sockets (*)
Aerial
Input
Audio Inputs Subwoofer
Out
HDMI 4
(*) Number of these inputs may change according to the model of your TV.
Aerial cable:................................................................
Connect the aerial to the ANT. socket on the rear of the TV.
SCART lead:..............................................................
If you use a decoder* or a media recorder, it is essential
that the scart cable is connected to the TV.
Before running rst time installation, any connected devices
need to be set to standby mode.
The DIGITAL AUDIO socket enables the connection of a
suitable surround sound system.
HDMI
®
(High-Denition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-denition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
Note: Although this TV is able to connect to HDMI equipment,
it is possible that some equipment may not operate correctly.
When connecting a device via the Side AV input, you must
use the supplied connection cable to enable connection.
When connecting a device via YPbPr input, you must use a
proper connection cable(not supplied) to enable connection.
LAN Input is used to connect the TV to your home network.
You can use Subwoofer Out for connecting an external, active
subwoofer to the set to give a much deeper bass effect.
A wide variety of external equipment can be connected to the
TV; therefore, the relevant owner’s manuals for all additional
equipment must be referred to for exact instructions.
If the TV automatically switches over to monitor external
equipment, return to normal TV by pressing the desired
programme position button. To recall external equipment,
press “SOURCE - ” button repeatedly to switch between
sources.
Regardless of source’s property, audio output from the
DIGITAL AUDIO socket cannot be copied.
English - 10 -
English
Connecting an HDMI
®
or DVI Device to the HDMI Input
The HDMI inputs on your TV receive digital audio and
uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.
These inputs are designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital form
from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI
or DVI output).
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV.
• Supported Audio format: Linear PCM, sampling rate
32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to the HDMI
terminal. For proper operation, it is recommended that you
use an HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• To view the HDMI device video, press “SOURCE - ”
button to select the appropriate HDMI input.
HDMI Input
Socket
(Back)
HDMI device
* Number of
these inputs
may change
according to
the model of
your TV.
CEC
CEC operation is available if a CEC device is present. This
feature is limited to Toshiba disc players that support CEC.
The CEC osd menu is accessed through the “QUICK” button
on the remote the osd CEC menu will only be displayed if a
CEC product is connected.
To Connect a DVI Device
Connect an HDMI-to-DVI cable (HDMI type A connector) to the
HDMI input socket and audio cables to the RED and WHITE
SIDE AV AUDIO inputs on the Audio/Video connection cable
supplied (see illustration).
• The maximum recommended HDMI-to-DVI cable length
is 6.6 ft (2m).
• An HDMI-to-DVI cable transfers video only. Separate
analogue audio cables are required.
HDMI to DVI Cable
(not supplied)
Video Transfer
Audio Cable
(not supplied)
Audio Transfer
HDMI Input
Sockets
SIDE AV Input
Side Audio/Video
Connection Cable
(supplied)
Match
Colours
* Number of these
inputs may change
according to the
model of your TV.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
TV rst, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device rst, and then the TV.
English - 11 -
English
Connecting a Computer
To Connect a Computer
With either an RGB/PC or an HDMI connection, you can watch
your computer’s display on the TV and hear the sound from
the TV’s speakers.
When connecting a PC to the RGB/PC input on TV, use an
analogue RGB (15-pin) computer cable and use the SIDE
AV socket with a PC audio cable (not supplied) for audio
connection, using the supplied Side AV connection cable’s
RED and WHITE inputs (see illustration).
To use a PC, set the monitor output resolution on the PC
before connecting it to the TV. To display the optimum picture,
use the PC setting feature.
NOTE:
• Some PC models cannot be connected to this TV. An
adaptor is not needed for computers with a compatible mini
D-sub15-pin terminal.
• Depending on the DVD’s title and the specications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multiangle scenes.
Connecting a DVD Player
Connecting to a DVD Player via YPbPr
Some DVD players are connected through COMPONENT
SOCKETS (YPbPr). In this case, you must use the
Component YPbPr video connection cable (not supplied) for
enabling connection. First, plug the cable to the TV’s YPbPr
sockets (back). Afterwards, insert your YPbPr cable’s (not
supplied) connectors into the DVD players YPbPr sockets
(see illustration below). Colours of the connected jacks
should match.
To enable audio connection, use an audio cable cable (not
supplied). First, plug the audio cable’s connectors into the
audio inputs of the TV (back). Afterwards, insert the audio
cable’s single jack into the DVD players audio socket (see
illustration below). Colours of the connected jacks should
match.
YPbPr
V eo id
Cable
(N t supp ed) o li
DVD Player
Audio Cable
(Not supplied)
To RED & WHITE inputs
Video Connection
Audio Connection
Match
Colours
Match
Colours
Connecting a USB Memory
To Connect a USB Flash Drive
• You can connect a USB Flash Drive to your TV by using
the USB input/inputs on the TV. This feature allows you to
display/play music, photo or video les stored in a USB stick.
• It is possible that certain types of USB devices (e.g. MP3
Players) may not be compatible with this TV.
• You may back up your les before making any connections
to the TV set in order to avoid any possible data loss.
Note that manufacturer will not be responsible for any le
damage or data loss.
• Do not pull out USB module while playing a le.
CAUTION: Quickly plugging and unplugging USB
devices may cause damage to the USB device.
English - 12 -
English
Connecting a home network
Connectivity feature allows the TV to connect to the
home network wired or wirelessly. You can use this
networking system to connect to the Toshiba Portal or
to access photo, video and audio les that are stored
on a media server connected to the network and play/
display them on the TV.
Wired connection
Connect the TV to the modem/router via a LAN
cable (not supplied). Select Network Type as Wired
Device in Network Settings menu and then highlight
Network. Press Left or Right buttons and set as
Enabled to connect.
Broadband
ISP connection
LAN input
on the TV
LAN Cable
modem/router
LAN Cable
access point
Wireless connection
To connect the TV to the home network wirelessly just
select Network Type as Wireless Device in Network
Settings menu and then highlight Network. Press
Left or Right buttons and set as Enabled to connect.
The TV will search for available networks. Select the
desired network and press OK. The TV has a built-in
WLAN system and has no need for additional devices
to connect to a wireless network.
Broadband
ISP connection
TV (Built-In WLAN system)
LAN Cable
wireless modem/router
access point
Performance depends on many factors, conditions
and variables, including distance from acces
point(AP), volume of network trafc, building materials
and construction, operating system used, mix of
wireless products used, interference and other
adverse conditions.
Please refer to Network Settings section to congure
a wired or a wireless connection, if more detailed
information is needed.
English - 13 -
English
Power Save Mode
Environmental Information
This television is designed to be environment friendly. You not only help to save the environment but also
you can save money by reducing electricity bills thanks to the energy efciency feauture of this TV. To reduce
energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as
Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum
level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
If pressed Right button, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select
Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off
in 15 seconds. Press any button on the remote or on the TV to turn the screen on again. If you disable Power
Save Mode, picture mode will be automatically set to Dynamic.
It is highly recommended to activate Power Save Mode to reduce your annual power consumption. And also
it is recommended to disconnect the TV from the mains plug to save more energy when you are not going to
use it for a long period of time.
Repair Information
Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
English - 14 -
English
Controlling the TV
A wide variety of external equipment can be connected via the sockets located on the side and back of the
TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the
buttons on the Back of the TV may be used for some functions.
Switching on
If the standby LED is unlit, check that the mains plug is
connected to the power and press the button on the
back side of the television or button on the remote control
to switch the television on.
To put the television into Standby, press button on the
remote control or button on the TV. To view the television,
press again. The picture may take a few seconds to appear.
Note: The active Standby LED colour will turn to red in a few
moments when the TV is switched into Standby.
For energy saving:
Turning the TV off at its mains supply, or un-plugging it, will cut
energy use to nearly zero for all TV’s. This is recommended
when the TV is not being used for a long time, e.g. when
on holiday.
Reducing the brightness of the screen will reduce energy use.
Note: Putting the TV into standby mode, will reduce energy
consumption, but will still draw some power.
Using the Remote Control
Press the MENU button on the remote control to see the
menus.
The main menu appears as a group of icons each for a menu
option. Press the Left or Right button to select a topic.
In sub menu screen mode the menu appears as a list. Press
the Up or Down button to select a topic.
To use the options press the Up and Down buttons on the
remote control to move up and down through them and OK,
Left or Right buttons to select the required choice. Follow
the on screen instructions. The functions of each menu are
described in detail throughout the manual.
Using the Controls on the TV
Using the control buttons on the Back of the TV:
• To alter the volume press or .
• To alter the programme position press buttons
on the Back of the TV.
• Press buttons at the same to view main menu
and use buttons to navigate and to
change value.
To select an external input, press button until the
appropriate input source is selected.
Please always refer to the owner’s manual of the equipment
to be connected for full details.
English - 15 -
English
Initial Installation
Before switching on the TV, put your decoder and media recorder to Standby if they are connected and
ensure the aerial/cable is connected to your TV. To set up the TV, use the buttons on the remote control as
detailed on The Remote Control page.
IMPORTANT: Ensure that the aerial/cable is connected
and a Common Interface module is not inserted before
switching on the TV for the rst time installation.
1. Connect the mains plug and switch the TV on
using the button. If the TV does not switch on,
press any numbered or button on the remote
control, then the language selection menu will
be displayed. This screen will appear the rst
time that the TV is switched on and each time
the TV is reset.
2. By pressing Up or Down button, highlight the
language you want to set and press OK button.
The following screen will be displayed next:
3. By pressing Left or Right button, select the
country you want to set and press Down button
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available
search types are Digital only, Analogue TV
only and Full.
4. When set, press Down button to highlight
Teletext Language. Use Left or Right button to
select desired language region. Highlight Scan
Encryted Channels and enable/disable this
option by using Left or Right buttons. Press OK
to continue.
Note: Depending on the Country selection you may be asked
to set and conrm a PIN at this point. The selected PIN cannot
be 0000. You have to enter it if you are asked to enter a PIN
for any menu operation later.
5. The following message will be displayed next on
the screen:
Select Store mode if the TV will be placed in a
store to exhibit. This option will congure your
TV’s settings for best display quality and the
supported features of the TV will be displayed on
the top of the screen as a info banner. If Store
mode is selected, a conrmation screen will be
displayed. Select YES to proceed. For home use
select Home Mode.
This option will be available in Other Settings
menu and can be turned off/on later.
6. Press OK button on the remote control to continue
and a message will be displayed asking wheter
you want to do network settings. Select Yes and
the Network Settings menu will be displayed.
Please refer to Connecting a Home Network and
Network Settings sections to congure a wired
or a wireless connection. After the settings are
completed press OK button to continue.
7. Afterwards, the following OSD will be displayed
on the screen:
8. If you select Cable option, a conrmation screen
will be displayed. If you want to search for
available networks, select YES to proceed. The
following screen will be displayed:
English - 16 -
English
Initial Installation - continued
You can select Network, Frequency, Network
ID and Search Step from this screen. For
highlighting lines you see, use Up or Down button.
You can set Search Step as 8000 kHz or 1000
kHz. If you select 1000 kHz, the TV will perform
search process in a detailed way. Searching
duration will thus increase accordingly. When
finished, press OK button to start automatic
search.
If you select NO, the following screen will be
displayed:
You can set Start - Stop Frequencies and Search
Step as desired. When nished, press OK button
to start the search.
9. If you select Aerial option from the Search Type
screen, the television will search for broadcasts.
10. The Auto tuning screen will appear and the
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
Note: You can press MENU button to cancel.
While the search continues a message will appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK to conrm.
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel sequence (if available).
After the available stations are stored, Edit Channel
List will be displayed on the screen.
Press OK button to quit channel list and watch TV.
Note: Do not turn off the TV while initializing first time
installation.
English - 17 -
English
Auto Tuning
Auto Tuning
As new services are broadcast, it will be necessary to
retune the television in order to view them.
• It is recommended to run Auto Tuning periodically
to ensure that all new services are added. Please
be aware that Auto Tuning will completely retune
the television and all current channels and settings
will be lost.
• Press MENU button on the remote control and select
Install and Retune by using Left or Right button.
Press OK button and the following menu screen
will be displayed.
• Select Automatic Channel Scan (Retune) by using
Up or Down button and press OK button. Automatic
Channel Scan options will be displayed. You can
select options by using Up or Down and OK buttons.
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores
aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores
cable DVB and analogue stations.
• Whenever you select an automatic search type and
press OK button, a conrmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and OK button.
• After auto channel scan type is set and selected
and conrmed, installation process will start and
progress bar will move along. The television will
search for all available stations. You must allow
the television to complete the search. Press MENU
button to cancel the process. In such a case, located
channels are not stored.
Note: Menu list of available features may change depending
on the model.
English - 18 -
English
Manual Tuning, Analogue Fine Tuning
The television can be tuned-in manually using Manual Search feature.
Digital Aerial Manual Search
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
• Select Manual channel scan from the Install and
Retune menu and press OK.
After selecting search type as Digital Aerial, you
can enter the multiplex or frequency number using
the numeric buttons and press OK button to search.
• Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
• Repeat as necessary.
Digital Cable Manual Search
• In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
Analogue Manual Search
The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded lm into the media recorder
and press PLAY, then manually tune.
After selecting search type as Analogue, you can
use Up or Down button to highlight an item and then
press Left or Right button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
• Select Analogue Fine Tune from the Install and
Retune menu by using Up or Down and OK
buttons. Analogue ne tune screen will be displayed.
Analogue Fine Tune feature will not be available if
there are no analogue channels stored.
• Use Left or Right button to set Fine Tune. When
nished, press OK button.
Clear Service List (*)
(*) This setting is visible only when the Country option is set
to Denmark, Sweden, Norway or Finland.
• Select Clear Service List from the Install and
Retune menu by using Up or Down and OK buttons.
A conrmation message will be displayed. If you
want to delete all channels, select Yes and press
OK. Use this setting to clear channels stored.
English - 19 -
English
General Operation
Stereo and Bilingual Transmissions
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo… Press “LANG - ” to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual appears,
press “LANG - ” to select Dual I, Dual II or Mono.
For DTV broadcasts
To view current language and for changing to an
alternative language (if available), press “LANG -
” button. Available options will be listed.
Displaying Subtitles
In digital broadcasts, this feature will show subtitles
on the screen in the selected language provided they
are being broadcast.
Press SUBTITLE button to turn the subtitles on. Press
SUBTITLE button again to turn the subtitles off.
Viewing Main Menu
Press or buttons on the TV at the same
time to view main menu.
Press MENU button on the remote control to view
main menu.
Controlling Volume and Muting Sound
Volume
Press + or - button on the remote control to
adjust the volume.
Sound Mute
Press “ ” button once to turn the sound off and
again to cancel.
Selecting Programme Positions
To select a programme position use the numeric
buttons on the remote control. Programme positions
can also be selected using P or P buttons.
Press “INFO - ” button to display the on-screen
information i.e. programme position, stereo/mono
signal and picture format.
Standby Notications
If the TV switches off while in No Signal mode, the
following on-screen message will be displayed on the
next switch-on:
When the Auto TV OFF timeout is reached, the
following message will be displayed on the screen.
Select Yes to shut down the TV. Select No to cancel.
The TV will switch off as well, if you do not make a
selection on this screen.
If the TV switches off owing to the auto power down
feature, the following on-screen message will be
displayed on the next switch-on:
English - 20 -
English
Channel List, Sorting Programmes, Programme Locking
You can view stored channels and sort them by using the Channel List feature.
Viewing Channel List
The channel order may be changed to suit your
personal preference.
• Select Channel List from the main menu and press
OK button. The following menu will be displayed:
• Select Edit Channel List to manage all stored
channels. Use Up or Down and OK buttons to select
Edit Channel List.
• Press Up or Down button for selecting a channel.
You can press P or P button to move page up
or page down.
• To watch a specic channel, highlight it by using
Up or Down button. Afterwards press OK button.
• Press BLUE button to view ltering options.
• Press MENU or EXIT button to exit.
Note: The channels listed are mixed at the channel list.
Channel types can be differentiated by the icons next to them:
DTV (digital tv), HD (HD TV) , ATV (Analogue TV) ,TV (TV),
Radio symbol (Radio), encrypted, lock, and FAV symbols (for
channels in the favourite list). Listed channels can also be
sorted by using the active channel list lter.
Moving a Channel
• Highlight the desired channel by using Up or Down
button.
• Select Move option in the channel list by using Left
or Right button and press OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control and press OK. If there
is a previously stored channel on that number, a
warning screen will be displayed. Select Yes if you
want to move the channel and press OK.
• Selected channel is now moved.
Deleting a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
• Select the channel that you want to delete and select
Delete option by using Left or Right button. Press
OK button to continue.
• A warning screen will appear. Select Yes to delete,
select No to cancel. Press OK button to continue.
Renaming a Channel
• Select the channel that you want to rename and
select Edit Name option by using Left or Right
button. Press OK button to continue.
• Pressing Left or Right button moves to the previous/
next character. Pressing Up or Down button
changes the current character. Pressing the numeric
buttons ‘0...9’ replaces the highlighted character with
the characters printed above the button one by one
as the button is pressed.
• When nished, press OK button to save. Press
MENU or BACK to cancel.
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
• Select the channel that you want to lock by using
Up or Down button.
• Select Lock option by using Left or Right button.
Press OK button to continue.
• You will be asked to enter parental control PIN. Enter
the PIN number.
Note: Default PIN can be set to 0000 or 1234. If you have
dened the PIN(is requested depending on the country
selection) during the First Time Installation or changed the
default PIN later from the Set PIN option under the Parental
Settings menu, use the PIN that you have dened.
• Press OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.
English - 21 -
English
Viewing Info Banner, Electronic Programme Guide
Viewing Info Banner
• Press“INFO - ” button. The information screen will
appear giving details of the channel and programme
currently being viewed.
• Whenever you change channel, the TV displays the
broadcast picture along with an information banner at
the bottom of the screen. This will remain on the screen
for a few seconds.
• If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
• Enter the 4-digit PIN number to continue.
Note: Default PIN can be set to 0000 or 1234. If you have
dened the PIN(is requested depending on the country
selection) during the First Time Installation or changed the
default PIN later from the Set PIN option under the Parental
Settings menu, use the PIN that you have dened.
Electronic Programme Guide
• Select the on-screen guide by pressing GUIDE
button, the guide screen will appear highlighting
details of the channel and programme currently
being viewed. This may take a few moments to
appear.
• For details of other programmes currently available,
press navigation buttons to scroll up and down or
scroll left/right through the list. As channels are
selected, details of the programme currently being
broadcast will appear.
• Press RED button to view the previous day.
• Press GREEN button to view the next day.
• Press YELLOW button for zooming to a programme.
• Press BLUE button to display ltering options.
• Press SUBTITLE button to sort channels by a genre.
• For information on a highlighted programme, press
“INFO - ” button.
• Use numeric buttons for quickly selecting a
broadcast.
• Use the navigation buttons to highlight a programme
and press OK button to display Event Options
menu. The following options are available.
Select Channel: Using this option, you can switch
to the selected channel.
Record / Delete Record Timer: Select Record
option and press the OK button. If the programme
is going to be broadcasted at a future time, it will be
added to Timers list to be recorded. If the selected
programme is being broadcasted at the moment,
recording will start immediately.
To cancel an already set recording, highlight that
programme and press the OK button and select
the option Delete Rec. Timer. The recording will
be cancelled.
Note: You cannot switch to any other channel or source
while there is an active recording on the current channel.
Set Timer on Event / Delete Timer: You can set
a timer for future programmes using this option.
To cancel an already set reminder, highlight that
programme and press the OK button. Then select
Delete Timer option. The timer will be cancelled.
Note: It is not possible to record or set timer for two or more
individual events at the same time interval.
• Press TEXT button to display searching options.
• Press “SWAP- ” button for displaying current
programmes.
• Press REC button to start recording the selected
programme. If the programme is going to be
broadcasted at a future time, it will be marked with
a red frame and added to Timers list to be recorded.
If you select and press REC button again, the
programme will be removed from the list.
English - 22 -
English
Language Selection
Language Settings
Using this menu you can adjust the preferred language
settings. Some features may not be available.
• Press MENU button and select Settings by using
Left or Right button.
• Select Language and press OK to view this menu.
Select the desired language by using Left or Right
button. Press the MENU button on the remote
control to exit.
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
Audio: By pressing Left or Right button change the
audio language.
Subtitle: Alter the subtitle language with Left or Right
button. The chosen language will be seen in subtitles.
Teletext: Changes the preferred teletext language.
Guide: By pressing Left or Right button change the
guide language.
Current
Audio: If audio language is supported, change the
audio language by pressing Left or Right button.
Subtitle: If subtitle is backed up, alter the subtitle
language with Left or Right button. The chosen
language will be seen in subtitles.
English - 23 -
English
Digital Settings - Parental Control, Menu Lock, Set PIN
You can view or set parental preferences of your TV.
Viewing Parental Control Menu
Press MENU button and select the Settings by using
Left or Right button. Press OK button to view Settings
menu. Use Up or Down button to highlight Parental
and press OK to continue:
• A dialogue box asking for the lock key will be
displayed.
• If it is incorrect, “Wrong PIN” OSD will be displayed.
If it is correct, the Parental Control menu will be
displayed:
Note: Default PIN can be set to 0000 or 1234. If you have
dened the PIN(is requested depending on the country
selection) during the First Time Installation use the PIN
that you have dened.
Menu Lock
In Menu lock you can set locking for All menus, or the
Installation menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system.
• Use Up or Down buttons to go to Menu Lock
option. Use Left or Right buttons to choose Menu
Lock Mode.
OFF: All menus are unlocked.
ALL MENUS: All Menus are accessible only with
the correct lock key. So the user cannot add, delete,
rename, channels or set timers.
INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels.
Maturity Lock
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
disables access to the broadcast.
Note: Maturity Lock is not available in all countries.
Child Lock
Child Lock disables the buttons on the television. All
buttons on the remote control can still be used.
Set PIN
• Use Up or Down buttons to select Set PIN option.
Press OK to display the Set PIN window.
• Use numeric buttons to enter new pin number. You
will need to input your new pin a second time for
verication purposes.
• After typing correct PIN numbers, PIN number will
be changed.
Note: If you change the pin number make sure you write it
down and keep it safe.
English - 24 -
English
Conguring Picture Settings
You can congure picture settings of your TV by using Picture Settings menu.
Conguring Picture Settings
You can use different picture settings in detail. You
can customize current picture mode settings as
desired. For example, you can change items such as,
Brightness, Contrast, Colour and Sharpness.
Press MENU button and select Picture by using Left
or Right button. Press OK button to view Picture
Settings menu.
Operating Picture Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Use Left or Right button to set an item.
• Press MENU button to exit.
3D Settings
The 3D feature of your TV enables you to view 3D
content.
Refer to the Using 3D Feature section in this manual
for detailed explanations on how to use the 3D
Settings menu items.
Mode
This TV offers the choice of personalising the picture
style. Natural, Cinema, Game, Sports and Dynamic
are preset options and affect settings within the TV.
Press Left or Right button to select the picture mode
you prefer.
Note: Some options may be inactive depending on the
selected mode.
Contrast
Sets the lightness and darkness values of the screen.
Press Left or Right button to adjust the contrast.
Brightness
Sets the brightness value for the screen. Press Left
or Right button to adjust the brightness.
Sharpness
Sets the sharpness value for the objects displayed
on the screen. Press Left or Right button to adjust
the sharpness.
Colour
Sets the colour value, adjusting the colours. Press
Left or Right button to adjust the colour.
Power Save Mode
Enables or disables the power save mode. Press
Left or Right button to set as Disabled, Eco or to
turn the screen off. See the section Environmental
Information in this manual for further information on
Power Save Mode.
Note: Picture mode will be set to Dynamic automatically if
the Power Save Mode is set to Disabled.
Backlight
This setting controls the backlight level and it can be
set to Auto, Low, Medium and High.
Note: The backlight function will be inactive if Power Save
Mode is set to Eco or picture mode is set to Game.
Noise Reduction
Sometimes some words or picture elements may
become distorted or pixelated. Using the Noise
Reduction feature reduces this effect by smoothing
out the edges. Press Left or Right button to set noise
reduction level.
Advanced Settings
Some additional controls in the picture menu are
grouped under the title Advanced Settings. To view
or change, rst highlight Advance Settings and press
OK button to view. Advanced Settings menu controls
are as the following:
Dynamic Contrast: You can change contrast rate by
using dynamic contrast function. Dynamic contrast
can be set to one of these options: Low, Medium,
High or Off.
Colour Temp: Colour Temperature increases the
‘warmth’ or ‘coolness’ of the picture by increasing the
red or blue tint. Colour temperature can be set to one
of these options: Normal, Warm or Cool.
English - 25 -
English
Conguring Picture Settings - continued
Picture Zoom: Sets the picture size to Auto, Full, 16:9,
Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Press Left
or Right button to change the setting.
Movie Sense: Press left/right buttons to set as Low,
Medium, High or Off. While Movie Sense is active,
it will optimize the TV’s video settings for motional
images to acquire a better quality and readability.
When Movie Sense option is set to Low, Medium or
High, demo option will be available. If one of these
options is selected and if you press OK button, then
the demo mode starts. While demo mode is active, the
screen will be divided into two sections, one displaying
the movie sense activity, the other displaying the
normal settings for TV screen.
Film Mode (optional): Films are recorded at a
different number of frames per second to normal
television programmes. Press Left or Right button
to set this feature to Auto or Off. Turn this feature
to Auto when you are watching lms to see the fast
motion scenes clearly.
Skin Tone: Adjust the desired skin tone.
Colour Shift: Adjust the desired colour tone.
RGB Gain: Press OK button to edit RGB gain. You
can congure the colour temperature values using
the RGB Gain feature.
HDMI True Black (optional): While watching from
HDMI source, this feature will be visible in the
Advanced Settings menu.
You can use this feature to enhance blackness in the
picture. Set this feature to On to activate.
Note: HDMI True Black On/Off feature functions only when
the HDMI device output is set to RGB.
Reset
This feature allows you to reset the current picture
settings to the default values. Press MENU button and
select Picture by using Left or Right button. Press Up
or Down button to select Reset and press OK button.
Note: The reset function does not reset the settings for Mode,
Noise Reduction, Colour Temp, Picture Zoom and HDMI
True Black.
English - 26 -
English
Changing Picture Format
Press “SCREEN - ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom,
4:3 or Cinema.
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for
the purposes of public display or commercial gain may infringe on copyright laws.
You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom,
Cinema or Subtitle.
(*) When Auto is selected, the aspect ratio of the screen is adjusted by the information provided by the selected source (if
available). The format being displayed in Auto mode is completely independent of WSS information which could be included
in the broadcast signal or the signal from an external device.
Note: Auto mode will only be available in SCART, HDMI, YPbPr and DTV.
(**) Full mode is only available on HD channels.
16:9
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9 etc.)
black bars may be visible on the top
and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast
.
14:9 Zoom
This option zooms to the 14:9 picture.
Subtitle
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all the text is displayed.
14:9
This zooms up the wide picture (14:9
aspect ratio) to the upper and lower
limits of the screen
Cinema
This zooms up the wide picture
(16:9 aspect ratio) to the full
screen.
English - 27 -
English
Conguring PC Picture Settings
PC Picture Settings (*)
(*) While in VGA/PC mode, some items in Picture
menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in VGA/
PC mode.
PC Picture controls
Contrast, Brightness and Colour adjustments in
this menu are identical to adjustments dened in TV
picture menu.
Select Reset and press OK button to reset the
adjustments.
Note:
For switching to VGA/PC source, press “SOURCE -
” button on your remote control and select VGA/
PC input.
Note that VGA/PC mode menu settings are available
only while the TV is in PC source.
PC Position
Select this to display PC position menu items.
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.
Highlight Autoposition and then press the OK button.
H Position
H (Horizontal) Position shifts the image horizontally to
right hand side or left hand side of the screen.
Press Down button until H Position is highlighted.
Press Left or Right button to adjust the value.
V Position
V (Vertical) Position shifts the image vertically towards
the top or bottom of the screen.
Press Down button until V Position is highlighted.
Press Left or Right button to adjust the value.
Dot Clock
Dot Clock adjustment corrects the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Press Down button until Dot Clock is highlighted.
Press Left or Right button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV Set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Press Down button until Phase is highlighted.
Press Left or Right button to adjust the value.
English - 28 -
English
Conguring Sound Settings
You can congure sound settings of your TV by using Sound Settings menu.
Conguring Sound Settings
Sound settings can be congured according to your
personal preferences.
Press MENU button and select Sound by using Left
or Right button. Press OK button to view Sound
Settings menu.
Operating Sound Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Use Left or Right button to set an item.
• Press MENU button to exit.
Volume
Select Volume using Up or Down button and then use
Left or Right button to set volume level.
Equalizer (Only for speaker)
You can customize current sound mode settings. Select
the appropriate mode in accordance with the installation
location of the TV and adjust the equalizer on-screen as
desired. Press OK button to view equalizer submenu.
In equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User. Press the
MENU button to return to the previous menu.
Note: Equalizer menu settings can be changed manually
only when the Equalizer Mode is in User.
Balance (Only for speaker)
This setting is used for emphasizing left or right speaker
balance.
• Press Left or Right button to change the level of the balance.
Balance level can be adjusted between -31 and +31.
Headphone
This setting is used to set the sound output when
headphones are connected.
• Press Up or Down button to select Headphone.
• Press Right button to increase headphone volume level.
Press Left button to decrease headphone volume level.
Headphone volume level can be adjusted between 0
and 63.
Sound Mode
This setting is used to set the Sound Mode. Higlight
Sound Mode by using Up or Down button. Press Left
or Right button to set.
You can select Mono, Stereo, Dual I or Dual II mode,
only if the selected channel supports that mode.
AVL
Sometimes there can be large changes in volume
when switching from a DTV 5.1ch to a DTV 2ch, an
ATV channel, or an external input. Using the AVL
feature reduces these volume differences.
• Press Up or Down to highlight AVL. Press Left or Right
button to set AVL as On or Off.
Headphone/Lineout
Set this option as Lineout, when an external amplier
is connected to the TV using the headphone jack. If
headphones are connected to the TV, set this option
as Headphone.
Dynamic Bass
Dynamic Bass is used to increase bass effect of the
TV set. Select Dynamic Bass using Up or Down
buttons and press Left or Right button to set.
Surround Sound
In the Sound menu, press Up or Down to highlight
Surround Sound. Press Left or Right button to set
Surround Sound as On or Off.
Digital Out
This setting enables you to set Digital Out preference
as Compressed or PCM. You should set this feature
in accordance with the received broadcast’s content.
Select Digital Out using Up or Down button and then
use Left or Right button to set.
English - 29 -
English
Settings Menu Operation, Conditional Access
Conguring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
Viewing Settings Menu
Press MENU button and select Settings by using Left
or Right button. Press OK button to view Settings
menu.
Press Up or Down button to highlight a menu item.
Press OK button to select an item. Press MENU
button to exit.
Conditional Access: This setting controls conditional
access modules when available. Use Up or Down
button to highlight Conditional Access. Press OK
button to continue.
Language: Congures language settings.
Parental: Congures parental settings.
Timers: Sets timers for selected programmes.
Recording Conguration: Displays the recording
conguration menu.
Date/Time: You can congure date/time preferences
by using this menu screen.
Sources: Enables or disables selected source
options.
Network Settings: Congures network settings.
Other Settings: Displays other setting options of
the TV set.
Using a Conditional Access Module
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.
IMPORTANT: Insert or remove the CAM only when
the TV is SWITCHED OFF.
• In order to watch certain digital channels, a conditional
access module (CAM) is necessary. This module must
be inserted in the CI slot of your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the following
procedure.
• Insert the CAM and then the viewing card to the slot that
is located in the terminal cover at the rear side of the TV.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
Connect the TV to the mains supply, switch on and then
wait for few moments until the card is activated.
• When no module is inserted, “No common interface
module detected.” message appears on the screen.
• Refer to the module instruction manual for details of
the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on the
service provider.
Press MENU button and select Settings by using
Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.
English - 30 -
English
Setting Timers
Timers
To view Timers menu, press MENU button and
select Settings by using Left or Right button. Press
OK button to view Settings menu. Use Up or Down
button to highlight Timers and press OK to continue:
Setting Sleep Timer
The television can be set to turn itself off after a certain
length of time.
• Highlight Sleep Timer by using Up or Down button.
• Use Left or Right button to set. The timer can be
set to Off or between 30 minutes and 2 hours (120
minutes) in steps of 30 minutes.
Setting Programme Timers
This feature will set the television to go to a specic
channel at a certain time. It can be used to view a
particular programme or can be used to view a series
of programmes by setting the Repeat option to Daily,
Weekly or Weekdays.
Press Down button to highlight a timer on an event.
Programme timer function buttons will be displayed
on the screen.
Note: This feature will be available only when a timer has
been programmed.
Adding a Timer
Press YELLOW button on the remote control to add
a timer. The Add timer menu appears on the screen:
Network Type: Set the network type to lter the
channels that will be listed in the Channel option.
Timer Type: You can select timer type as Record
or Timer.
Channel: Changes channel by using Left or Right.
Record Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric buttons.
End: Enter an ending time using the numeric buttons.
Duration: Displays duration between the starting
and ending time.
Repeat: Sets a timer to be repeated as Once, Daily,
Weekly or Weekdays.
Change/Delete: There are two options available,
Allowed and Disallowed. If this option is set as
Disallowed, a PIN(*) is required to change or delete
the programmed timer.
Playback: Controls the permission for the playback of
the programme that will be recorded. There are three
options available, Use parental settings, Disallowed
and Allowed. To set this option as Allowed, user
should enter a PIN(*). This option is only available if
the Timer Type is set to Record.
(*) Default PIN can be set to 0000 or 1234. If you have dened
the PIN(is requested depending on the country selection)
during the First Time Installation use the PIN that you
have dened.
Press OK button to save the timer. Press RET/BACK
button to cancel.
Editing a Timer
• Select the timer you want to edit by pressing Up or
Down button.
• Press GREEN button to edit.
• When nished with editing, press OK button to save.
You can press RET/BACK button to cancel.
Deleting a Timer
• Select the timer you want to delete by pressing Up
or Down button.
• Press RED button.
• Select Yes by using Left or Right button and press
OK to delete the timer. Select No to cancel.
English - 31 -
English
Recording Conguration
This feature is not available in all countries. For the countries where this feature is available a USB
connected storage device will be required.
Recording Conguration
You can congure recording preferences using this
menu. Press MENU button and select Settings by
using Left or Right button. Then select Recording
Conguration item in the sub-menu and press OK
button. The following menu will be displayed.
Start early: You can set recording timer’s starting time
to start earlier by using this setting.
End late: You can set recording timer’s end time to
end later by using this settings.
Max Timeshift: This setting allows you to set the
maximum time allowed for timeshifting. Duration
options are approximate and can change accordingly,
depending on the broadcast received.
Auto Discard: You can set the Discard type as None,
Oldest, Longest or Shortest. If the Discard type is
not set to None, you can set the Unplayed option as
Included or Excluded.
Hard disk information: You can view detailed
information about the USB storage device connected
to your TV.
Format Disk: If you want to delete all les on the
connected USB storage device and convert the disk
format to FAT32, you can use this option.
Press OK button while the Format Disk option
is highlighted. A menu will appear on the screen,
requiring you to enter the PIN(*). After you enter the
PIN, a conrmation message will be displayed.Select
YES and press OK to start formatting the USB storage
device. Select NO and press OK to cancel.
(*) Default PIN can be set to 0000 or 1234. If you have dened
the PIN(is requested depending on the country selection)
during the First Time Installation use the PIN that you
have dened.
IMPORTANT:
Note 1: ALL the data stored on the USB storage
device will be lost and then the disk format will be
converted to FAT32 if you activate this feature. Ensure
that you backed up important recordings or data in the
device before you format it.
Note 2: The USB storage device will not work on other
media players if formatted on the TV
English - 32 -
English
Setting Date/Time
Conguring Date/Time Settings
You can congure date/time preferences by using
this menu screen.
• Select Date/Time in the Settings menu to congure
Date/Time settings. Press OK button.
Use Up or Down button to highlight the Time Settings
Mode. It can be set to Auto or Manual.
When Auto is selected, Date, Time and Time Zone
options will not be available to be set. If Manual option
is selected as the Time Zone can be altered:
Press Up or Down button to select Time Zone.
Use Left or Right button to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
Note: For countries without Digital channels, only the Date
and Time option will be displayed.
Source Settings
Conguring Source Settings
You can enable or disable selected source options. The
TV will not switch to the disabled source options when the
“SOURCE - ” button is pressed.
• Select Sources in the Settings menu and press
OK button.
• Press Up or Down buttons to select a source.
• Use Left or Right button to enable or disable the
selected source. Changes are automatically stored.
Input Selection
Use the Input Selection window if the television does
not switch over to a connected source automatically.
Press “SOURCE - ” button on your remote control
for directly changing sources. Use the Up or Down
button to highlight an input and press Right or OK
button to select.
English - 33 -
English
Other Controls
Conguring Other Settings - General
You can congure the settings of your TV. Select
Settings from main menu and press OK to view the
Settings menu. Press the MENU button on the remote
control to exit.
To view general conguration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
• Press Up or Down button to select an item.
• Use Left or Right button to set an option or press
OK button to view a sub-menu.
Menu Timeout
To set a specic display timeout for menu screens,
set a value for this option.
In the Other Settings menu, select Menu Timeout
and choose 15 sec, 30 sec, 60 sec or Off using Left
or Right button.
Scan Encrypted Channels
When this setting is set as Yes, search process will
locate the encrypted channels as well. If it is set as
No manually, encrypted channels will not be located
while in automatic search or manual search. Scan
Encrypted Channel feature will always be Yes after
performing rst time installation.
• In the Other Settings menu, use Up or Down button
to select Scan Encrypted Channels.
• Press Left or Right button to set this function as
Yes or No.
Hbb TV
If you set this option to On, HbbTV services such as
catch-up services, video-on-demand, EPG, games
will be available if the broadcast supports. You can
disable this feature by setting this option to Off.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
• In the Other Settings menu, select Blue
Background and choose On or Off using Left or
Right button.
Software Upgrade
This feature helps to keep your TV updated. It works
automatically and searches for new information when
available.
You can enable or disable automatic upgrade by
setting the Automatic Scanning option.
You can manually start searching for new software by
selecting Scan for upgrade and pressing OK button.
Press RET/BACK or MENU button to cancel the
process.
Application Version
Displays the current software version.
Hard of Hearing
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
• Use Up or Down button to select Hard of Hearing
and then press Left or Right button to set this setting
as On or Off.
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies. The description
narrator talks through the presentation, describing
what is happening on the screen during the natural
pauses in the audio (and sometimes during dialogue,
if deemed necessary). You can use this feature, only if
the broadcaster supports that additional narration track.
English - 34 -
English
Other Controls - continued
• Highlight Audio Description by pressing Up or
Down button.
• Press OK button to enter Audio Description
submenu.
• Use Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.
Auto TV Off
You can set the timeout value of auto off feature. After
the timeout value is reached and the TV is not operated
for selected time, the TV will go off. Press MENU button
and select Settings by using Left or Right button. Press
OK button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select Auto
TV Off using Up or Down button.
Standby Search (optional)
If the Standby Search is set to On and the TV is in
standby mode, the TV will look for any changes in
the saved channels. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select
Standby Search using Up or Down button and use
Left or Right button to set.
Store Mode
If you set Store Mode to Enabled, your TV’s
features will be illustrated on the top of the screen. To
deactivate this feature, set to Disabled.
Media Renderer
This feature allows to share/play files stored in
a compatible mobile device on the TV. Install an
appropriate software on your device and read
instructions of the sharing software for more
information. Highlight Media Renderer and press
Left or Right button to enable or disable.
Power Up Mode
This setting congures the power up mode preference.
Standby: The TV always powers up in Standby mode.
Last State: The TV always switches on with the last
selected channel/source.
Virtual Remote
This function allows to control the TV via a wireless
handheld device. Enable the Virtual Remote feature
by pressing Left or Right button.
• Download a virtual remote controller application from
the server of your mobile device application provider.
• Connect the TV and the mobile device to the same
network. Refer to the Network Settings section to
make the connection properly.
This feature may not be supported on all mobile
devices.
CEC
This function allows to control the connected HDMI-
CEC compatible devices with the remote control of the
TV. Press Left or Right button to enable the feature.
Select the HDMI input of the connected device from
the source menu. The TV remote is automatically
able to control most functions of the device (navigate
menus, change channels, launch the disc etc.).
To terminate this operation and control the TV via the
remote again, press QUICK button on the remote,
highlight the CEC RC Passthrough and set as Off
by pressing Left or Right button. To control the CEC
device again set the CEC RC Passthrough option as
On. It is also possible to disable this feature in the
conguration menu of the connected HDMI device.
Refer to the operating instructions of the related
device.
CEC operation is available if a CEC device is present.
The CEC osd menu is accessed through the QUICK
button on the remote. The CEC osd menu will only be
displayed if a CEC product is connected.
CEC Auto Power On
This function allows the connected HDMI-CEC
compatible device to turn on the TV and switch to its
input source automatically.
Press Left or Right button to enable or disable the
feature.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.
English - 35 -
English
Network Settings, Portal, Internet Browser and YouTube
Conguring Network Settings
Press the MENU button to open the main TV menu.
Highlight Settings by pressing Left or Right buttons
and press OK to enter. Highlight Network Settings
and press OK. While Network Type is highlighted,
press Left or Right buttons to select connection type.
Then highlight Network. Press Left or Right buttons
and set as Enabled to enable the connection.
If you are going to make a wireless connection for
the rst time, press YELLOW button to search for
available networks. If there is no presaved wireless
prole on the TV, the TV will also search for available
networks when set as Enabled. Choose a network
from the list and press OK. You may have to enter
a password if the selected network is password-
protected. Enter the password and choose OK on the
virtual keyboard and press OK.
Wait a while and Conguration Status will change
to Connected. IP address and Network name will
appear, which means that the connection is done.
First enter to Toshiba Portal
At rst time the “ ” button is pressed, the TV
downloads and installs the latest version of the
portal if available. Then the introduction page of
the portal setup wizard will be displayed. Press
OK to proceed.
Next step is End User License Agreement(EULA).
The user have to scroll the whole text down to
the end and check the box next to Agree by
highlighting it and pressing the OK button. This
means that the user accepts the agreement.
Now, the user can highlight Next and proceed
by pressing OK.
The user can skip the rest and portal page will
be displayed. Account and profile settings can
be configured later from the Settings menu on
the portal.
Using the Toshiba Portal
You need to congure a home network before using
this feature.
Toshiba Portal is a service, where content (web sites,
applications, online services etc.) can be viewed
across the web through a simple user interface.
Press “ ” button on the remote. Select the desired
application using the navigation buttons. Press OK to
launch the application or go to related link. This can
take up to a minute or two to connect.
From the portal page, the user can also access to the
media les stored on USB storage devices connected
to the TV or on the media servers in the same network.
NOTES:
• Some applications may require an always-on
broadband internet connection, rmware update
and/or additional bandwidth dedicated to this
product.
• Third party internet services may change, be
discontinued or restricted at any time.
• Use of third party internet services may require
registration by a computer and if needed payment
of charges and membership.
• Service content and the interface may be changed
at any time without prior notice.
Toshiba makes no warranties about the content,
availability or functionality of third-party content or
services.
Using the Internet Browser
To use the internet browser, enter the portal rst. Then
launch the Internet application on the portal.
Predened web sites and logos will be displayed on
the browser’s opening page to provide quick access.
The user can add desired websites to the quick access
page. To add a new quick access item, point the
cursor to “ ” whilst on the website and press OK.
A submenu will be opened. Then point the cursor to
“ ” and press OK. On the next window, point
the cursor to one of the quick access items and
press OK to replace it with the new one.
To visit a web site move the cursor to the adress
bar using the navigation buttons on the remote and
press OK. The virtual keyboard will be opened in a
new window.
Enter the URL in the adress bar. Point the cursor to
“ ” button and press OK.
To make a search on internet, enter a keyword in
the adress bar. Point the cursor to “ ” button and
press OK.
Press the BACK button to close the virtual keyboard
or to go to previous page in the browser.
Press the “ ” button to turn back to portal home
page.
English - 36 -
English
Network Settings, Portal, Internet Browser and YouTube -
continued
Press the EXIT button to close the portal and
watch TV again.
NOTES:
• The virtual keyboard or numeric buttons on the
remote, which are assosiated with the letters of the
alphabet, can be used for entries.
• The browser does not support multiple tabs.
• Some internet pages include ash content. These
are not supported by the browser.
• The TV does not support any download processes
from the web browser.
Using YouTube
TM
You need to congure a home network before using
this feature.
This TV allows you to view Youtube content.
Press “Mybutton1 - ” to connect YouTube directly.
You can also press “ ” button on the remote and
launch the YouTube application on the portal to access
YouTube.
NOTES:
• Depending on the network environment and use
case, you may experience difculty viewing the
content.
• It may take time for the TV to load and begin playing
back the content.
• Service content and the interface may be changed
at any time without prior notice.
English - 37 -
English
Using 3D Feature
IMPORTANT: Before using the 3D feature of your TV, read the
Cautions for 3D section in the back of the manual.
Operating the 3D Mode “
3D
”
Press the MENU button on the remote and select the
Picture icon using the Left or Right buttons. Press
OK button to view Picture Settings menu. Use Up
or Down buttons to select 3D Settings and press OK
to view. For quick acces to 3D Settings menu just
press the 3D button on the remote.
Notes:
• You should select suitable 3D Mode before viewing.
If appropriate mode is not selected, 3D image can
not be correctly displayed.
• The 3D picture may not be visible or become
distorted when watching under intense light
conditions.
• If you experience screen ickering when watching
3D images in poor light conditions, you should turn
the lamp off or dim the light.
• To view 3D contents or programmes in 3D mode
you should wear the active 3D shutter eyewear that
supports Bluetooth™ wireless technology. Note that
this TV’s 3D feature works only with its specic 3D
eyewear.
• Use the 3D eyewear where there is no interference
from other Bluetooth™ or Wireless LAN devices.
LITHIUM BATTERY CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace with the same or equivalent type.
Using the 3D Eyewear
Refer to the manual of the 3D eyewear before use for detailed
information and instructions on usage.
Before using you should pair the eyewear with your
TV. Press the power button on the eyewear to turn it
on. You can enjoy viewing 3D images now by wearing
the 3D eyewear. Turn off the eyewear after using it.
The 3D eyewear may not operate correctly at the
outside of the viewing range. Use the 3D eyewear
within the viewing range. The range may be shortened
depending on the obstacles between the TV and the
3D eyewear, or the surrounding environment.
Cleaning and maintenance of the 3D eyewear
• Do not apply spray cleaners directly onto the surface
of the 3D eyewear.This may result in discoloration
and cracks and may cause the screen display to
peel off.
• Make sure the cleaning cloth is soft and does not
contain any foreign material or dust. Using a dirty
cloth will damage your 3D eyewear.
• Do not drop or bend the 3D eyewear.
Viewing 3D images
Incoming video signals can either be in 2D or 3D
format. A 2D signal can be viewed in either 2D or 3D,
and 3D can be viewed in either 2D or 3D. If the 3D
Mode option in the 3D Settings menu is set to Auto,
the TV can detect the 3D signal and change to 3D
mode automatically. Otherwise you can change the
viewing mode from the 3D Settings menu. Press the
3D button on the remote for quick access to the 3D
Settings menu.
The format of the 3D signal can be either Side By Side
(SBS) or Top Bottom (TB). You may have to choose
the correct format using the 3D Settings menu if the
TV can not detect it automatically.
Moreover, when viewing in 2D, you can change 2D
images to 3D images by enabling the Virtual 3D
option in the 3D Settings menu.
3D format Description
Side By Side
(SBS)
Images for the left and right eyes are positioned
side-by-side.
Top Bottom (TB)
Images for the left and right eyes are positioned
at the top and bottom of the screen.
Changing 3D format from the Quick menu
Press the QUICK button on the remote to open the
quick menu. Press Up or Down buttons to select 3D
Mode option. Press Left or Right buttons to set the
3D Mode.
Watching 3D images in 2D format
First off all the TV should be in 3D mode. This means
the TV should receive 3D image and 3D Mode
shouldn’t be set to Off or Game. Press the 3D button
on the remote to open 3D Settings menu quickly.
Select 2D Only option using the Up or Down buttons.
Press Left or Right buttons to set 2D mode as Left,
Right or Off.
Watching 2D images in 3D format
Press the 3D button on the remote to open 3D
Settings menu quickly. Select Virtual 3D option using
the Up or Down buttons. Press Left or Right buttons
to set as Low, Medium, High or Off.
Switching left and right images
The left and right eye shutter timing of the glasses
can be swapped. If 3D images look blurred, switch
the left and right sides of the 3D image.
Press the 3D button on the remote to open 3D
Settings menu quickly. Select Left/Right Swap option
using the Up or Down buttons. Press Left or Right
buttons to set as Left/Right or Right/Left.
English - 38 -
English
Using 3D Feature - continued
3D Settings
3D Important Info
Highlight 3D Important Info and press OK button
on the remote to display safety precautions for 3D
viewing.
3D Mode
You can customize the 3D mode settings to provide
the best viewing experience. Select one of the
following modes to experience 3D image viewing:
Auto: Automatically switches to 3D mode if 3D
information is detected from a digital broadcast or a
HDMI source.
Side by Side: Displays 3D content which is originally
in a form of side by side.
Top bottom: Displays 3D content which is originally
in a form of top and bottom.
Game: When playing 1:1 games on your TV, each
player can enjoy the game with a full screen using
this feature. To do this, the game you want to play
has to support Dual Play. And you need to put on
the proper Dual Play glasses(sold separately). If a
problem occurs by using Game mode, turn off/on the
connected game console rst and try again. Even if
the game doesn’t support dual play, in certain split-
screen games it is possible to use dual play feature
by setting the TV’s 3D Mode to Side by Side or Top
Bottom according to the split screen type that the
game includes.
Off: 3D function mode is turned off.
2D Only
If content is 3D but you want to watch it in 2D, you can
switch to 2D Only mode. There are 2 options (LEFT
and RIGHT) to select which side of the content you
want to watch in 2D.
Virtual 3D
Conversion from 2D to 3D. You can enable or disable
this feature by setting as Low, Medium, High or Off.
Left/Right Swap
You can use this setting to shift the phase of the 3D
left/right broadcast.
3D Depth Sense
This setting enables the control of 3D depth.
3D Viewing Information
Refer to the size/distance guidelines below to
experience 3D in the best possible way.
Viewing Distance
Size
(inch)
22 26 32 37 40 42 46 47 48 55
Viewing
distance
(m)
0,8 0,95 1,2 1,35 1,45 1,55 1,7 1,75 1,8 2
Horizontal Viewing Angle
45
45
Vertical Viewing Angle
It is strongly recommended that the eye level of the
viewer should be same height as the center of the
TV. In case that is not possible, tilt the TV accordingly
in its stand or wall mount. The picture may not be
visible or may look dark if you do not stay within the
viewing angle.
English - 39 -
English
Using 3D Feature - continued
Supported 3D Content Resolutions
HDMI,
MBV
MBP,
DTV
OTHER
1080p@24 FP
Supported Not Supported Not Supported
720p@50 FP
Supported Not Supported Not Supported
720p@60 FP
Supported Not Supported Not Supported
1080p FC
SBS, TB SBS, TB SBS, TB
720p FC
SBS, TB SBS, TB SBS, TB
1080i FC
SBS SBS SBS
OTHER
Not Supported (*) Not Supported
Please note that if you apply 720p FC TB input;
the picture will be scaled smaller than the original
size in the middle of the screen.
SBS: Side By Side
TB: Top Bottom
MBP: Media Browser Picture
MBV: Media Browser Video
FC: Frame Compatible
FP: Frame Pack
in MBP: Supported only when, the image’s height
is multiples of 2 and the image’s width is multiples of
16 and if the image width is equal to the panel width
or wider.
in DTV: Supported only when, the image’s height
is between 1700 and 1900 and the image’s width is
equal to 1280 or 720.
(*): Not supported if the image provides 1080i
resolution.
English - 40 -
English
USB Record Feature
This feature is not available in all countries. For the countries where this feature is available a USB
connected storage device will be required.
This feature allows you to record and play back
digital broadcast contents stored on a USB storage
device. Before you use this function, connect a USB
storage device to the TV rst while the TV is switched
off. You should then switch on the TV to enable the
recording feature.
Instant Recording
Press REC button to start recording an event instantly
while watching a programme. When “Press record
to add more events” message is displayed on the
screen, you can press REC button on the remote
control again to add the next event on the Programme
Guide to Timers list to be recorded.
In this case, an OSD will be displayed, indicating the
programmed events for recording. Press Stop button
to cancel instant recording.
You can not switch broadcasts or view the Media
Browser menu during the recording mode. While
recording a programme or during the timeshifting, a
warning message appears on the screen if your USB
device speed is not sufcient.
Timeshift Recording
Press Pause button while watching a broadcast to
activate timeshifting mode. In timeshifting mode, the
programme is paused and simultaneously recorded
to the connected USB storage device.
Press Play button again to resume the paused
programme from where you stopped. Press the Stop
button to stop timeshift recording and return to the
live broadcast.
Timeshift cannot be used while in radio mode.
Watching Recorded Programmes
Select the Recordings from the Media Browser
menu. Select an item from the list (if previously
recorded). Press the OK button to view the Play
options menu. Select an option then press OK button.
Press the Stop button to stop a playback and return
to the Recordings menu.
Note: Viewing main menu and menu items will not be
available during the playback.
Slow Forward
If you press Pause button while watching recorded
programmes, the slow forward feature will be available.
You can use “Rapid advance - ” button to slow
forward. Pressing this button consecutively will change
slow forwarding speed.
About the USB Record Feature
• Recorded programmes are saved into the connected
USB storage device. If desired, you can store/copy
recordings onto a computer; however, these les will
not be available to be played on a computer. You
can play the recordings only via your TV.
• The TV supports only FAT32 formatted USB
storage devices for recording functions. If this is
not the case, the USB storage device should be
formatted rst using the Format Disk option in the
Settings/Recording Conguration menu.
• To use recording feature your USB storage device
should have at least 2 GB free space and be USB
2.0 compatible. If the USB storage device is not
compatible an error message will be displayed.
• If the writing speed of the connected USB storage
device is not sufcient, the recording may fail and
the timeshifting feature may not be available.
• It is recommended to use USB storage devices
with high storage capacities for recording HD
programmes.
• Lip Sync delay may occur during the timeshifting.
Radio record is supported. The TV can record
programmes up to ten hours.
• Recorded programmes are split into 4GB partitions.
• Do not plug out the USB storage device during
a recording. This may harm the connected USB
storage device.
• Multipartition support is available. A maximum of two
different partitions are supported. The rst partition
of the USB storage device is used for PVR ready
features. It also must be formatted as the primary
partition to be used for the PVR ready features.
It is recommended to use a non-partitioned usb
storage device.
• Some stream packets may not be recorded because
of signal problems, as a result sometimes the picture
may freeze during playback.
• Record, Play, Pause, Display (for PlayListDialog)
keys can not be used when teletext is ON. If a
recording starts from timer when teletext is ON,
teletext is automatically turned off. Also teletext
usage is disabled when there is an ongoing
recording or playback.
English - 41 -
English
Using Media Browser
This TV allows you to enjoy photo, music or video les stored on a USB device or media server.
Manual Start
To display Media Browser window, press the “
” button on the remote control. The Media Browser
menu is also accessable from the main menu. Press
the MENU button on the remote. Select Media
Browser by pressing Left or Right button and press
OK.
Select the media type to be listed and press OK.
If there is more than one media source available, a list
of devices and servers will be displayed. Highlight the
device or server from the list and press OK.
Auto Start
When you plug a USB storage device, the following
menu will be displayed.
You can play or view music, video and picture les
from an USB storage device connected to the USB
port.
Moreover you can also play or view music, video and
picture les from a media server on the same network.
To display the les with folders, select Settings tab
and change View Style to Folder. So the selected
type of les in the selected folder will be displayed.
Additionally the All tab will be added to the main
Media Browser menu. To list all available music,
video and picture les in the selected folder at once,
select All tab and press OK button.
If View Style is set to Flat, all selected type of les
will be listed. If for instance, Video is selected in the
main Media Browser menu, TV will search the source
for all video les and list them.
Note:
Some USB compliant devices may not be supported.
If the USB storage device is not recognized after
power off/on or First Time Installation, plug the
USB device out and power off/on the TV set. Then
plug it in again.
• Do not use a USB Hub.
• You must obtain any required permission from
copyright owners to use copyright content.
Toshiba cannot and does not grant such permission.
• Depending on the le size and amount in your USB
storage device or media server, it may take some
time for loading to view. A message will be displayed
on the screen when loading les from the USB
device or media server.
• Only limited types of USB devices are supported.
Therefore, it is suggested not to use USB for playing
Media Player.
• Non-supported characters will be replaced with a
square (□).
English - 42 -
English
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device or media server.
Playing MP3 Files
To play mp3 les from a USB memory or media server,
you can use this menu screen.
• / : Navigate menu.
• Play ( button): Start to play all files listed
beginning with the selected one.
• Stop ( button): Stop the playback.
• Pause ( button): Pause/Resume the playback.
• Red button: Sort les by Title, Artist or Album.
Note: If the Viewing Style in Media Browser Settings
menu is set to Folder, the les will be displayed as
sorted and there is no need to sort les again by
pressing the RED button. In that case the RED button
will not function anyway.
• Loop/Shufe (Green button): Press once to enable
Loop. Press again to enable both Loop and Shufe.
Press once more to disable Loop. Press again to
disable Shufe. You can follow the disabled and
enabled functions with the change of the icons.
• Jump (Numeric buttons): Type the le number
using the numeric buttons on your remote to jump
to a le directly. The le with the typed number will
be only highlighted and will not be played.
• Play This (OK button): Play the selected le.
• Previous/Next (Left/Right buttons): Jump to
previous or next le and play.
• Yellow button: Change viewing style.
• Blue button: Change media type.
• Swap button: Open the Device Selection menu.
This option appears only when more than one media
source is detected.
Viewing JPEG Files
To view photo les from a USB Memory or media
server, you can use this menu screen. When you
select Photos in the main Media Browser menu,
available image les will be ltered and listed on this
screen.
• / : Navigate menu.
• Jump (Numeric buttons): Type the le number
using the numeric buttons on your remote to jump
to a le directly.
• OK: View the selected image in full-screen.
• Slideshow ( button): Start the slideshow to view
all the images automatically.
• Green button: View the images in thumbnails. Press
again to turn back to previous layout.
• Red button: Sort les by date.
• Yellow button: Change viewing style.
• Blue button: Change media type.
• Swap button: Open the Device Selection menu.
This option appears only when more than one media
source is detected.
English - 43 -
English
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device or media server.
Slideshow Feature
You can use this feature to display all images
automatically on your USB device or media server.
• Pause ( button): Pause the slideshow.
• Continue ( button): Continue the slideshow.
• Loop/Shufe (Green button): Press once to enable
Loop. Press again to enable both Loop and Shufe.
Press once more to disable Loop. Press again to
disable Shufe. You can follow the disabled and
enabled functions with the change of the icons.
• Previous/Next (Left/Right buttons): Jumps to
previous or next le on slideshow. When pressed,
the slideshow pauses.
• Rotate (Up/Down buttons): Rotate the image using
up/down buttons. When pressed, the slideshow
pauses.
• Return/Back: Back to le list.
• Info button: Display info bar.
• 3D Settings (3D button): Press to view 3D Settings.
Video Playback
When you select Videos from Media Browser menu,
available video les will be ltered and listed on this
screen. You can use Up or Down button to select a
video le and press OK button to play a video.
Note: If you select a subtitle le and press OK button,
you can select or deselect that subtitle le.
Jump (Numeric buttons): Type the le number using
the numeric buttons on your remote to jump to a le
directly. The le with the typed number will be only
highlighted and will not be played.
Play This (OK button): Play the selected le.
/ : Navigate menu.
LANG - (Play Preview): Display selected le in
a small preview screen. Press again to stop preview.
Red button: Sort les by name.
Play ( button): Start to play all les listed beginning
with the selected one.
Yellow Button: Change viewing style.
Loop/Shufe (Green button): Press once to enable
Loop. Press again to enable both Loop and Shufe.
Press once more to disable Loop. Press again to
disable Shufe. You can follow the disabled and
enabled functions with the change of the icons.
Blue: Change media type.
Swap button: Open the Device Selection menu.
This option appears only when more than one media
source is detected.
Play ( button): Start the video playback.
Stop ( button): Stop the video playback.
Pause ( button): Pause the video playback.
Rewind ( button): Goes backward.
Forward ( button): Goes forward.
3D Settings (3D button): Press to view 3D Settings.
Previous/Next (Left/Right buttons): Plays the
previous/next le.
Subtitle/Audio (LANG - button): Set Subtitle/
Audio.
Green: Jumps to the selected time.
Ret/Back: Back to le list.
Yellow: Open subtitle time correction menu.
Press OK to conm.
Press BLUE button to clear.
Press RET/BACK button to switch back to previous
menu.
English - 44 -
English
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device or media server.
Note:
You can set subtitles by using “LANG - ” button
during the playback. Selected subtitles may not be
displayed correctly in some cases.
In order to display movie subtitles correctly, you
should set a subtitle language. See the section,
Media Browser Settings for selecting movie subtitle
language.
Recordings
You can play back, edit or delete previously recorded
programmes stored on the USB storage device using
Recordings menu.
To display Recordings menu, Press the MENU
button on the remote. Select Media Browser by
pressing Left or Right button and press OK. Select
Recordings and press OK. Recordings menu will
then be displayed with available recordings.
IMPORTANT: To view the previously recorded
programmes in the Recordings window, you should
rst connect the USB storage device to your TV in
which the programmes are stored.
All the recordings are kept in a list. Select an item from
the list by using Up or Down button.
Red button: Erases the selected recording.
Green button: Makes changes on the Delete and
Playback options of the selected recording .
Blue button: Changes the order of the recordings.
You can select from a wide range of sorting options.
OK button: Opens the Play options menu. Select an
option by using Up or Down and press OK.
• Play from start: Plays the selected recording from
the beginning.
• Resume: Recommences the selected recording.
• Play from offset: Species a playing point for the
selected recording.
Resume ( button): Recommences the recording.
Details (INFO - button): Displays information on
the selected recording.
Media Browser Settings
You can set your Media Browser preferences by using
the Settings dialogue. Press Up or Down button to
highlight an item and use Left or Right button to set.
View Style: Set default browsing mode. Set as Flat to
list all selected type of les stored in the USB device
or media server. Set as Folder to list all selected type
of les in the selected folder.
Slideshow Interval: Set slide show interval time.
Show Subtitle: Set subtitle enabling preference.
Subtitle Language: Set supported subtitle language.
Subtitle Position: Set subtitle position as Up or
Down.
Subtitle Font Size: Set subtitle font size.
English - 45 -
English
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device or media server.
Using MENU button in Media Browser Mode
Pressing MENU button while in Media Browser mode
displays the following menu screen:
You can access Picture, Sound and Settings menu
options using this screen. Press MENU again to exit
from this screen.
To Close the Media Player
• Press EXIT button on the remote control.
English - 46 -
English
Analogue Only Text Services
This television has a multi-page text memory, which takes a few moments to load.
Analogue Text Services
Before using the text services, the required language
region must be chosen.
• Select Language from the Settings menu.
• Highlight Teletext in the Language Settings
menu and press Left or Right button to choose the
required language region.
After the Teletext language is selected, press MENU
button to exit.
Using Text Button -TEXT
• To view text services press TEXT. Press TEXT again
to superimpose text over a normal broadcast picture.
• Press TEXT again to return to normal viewing.
• Programmes cannot be changed until text is
cancelled.
• The rst text page shown will be the initial page.
• Any text page can be accessed by entering the 3
digit page number using the numbered buttons.
Press P / or Up/Down buttons to go to the next/
previous page.
• Four coloured titles will appear at the base of the
screen. To access one of the four given subjects,
press the relevant coloured button on the remote
control.
• For further information on your particular text
system(s), see the broadcast text index page or,
consult your local Toshiba dealer.
Below is a guide to the functions of the remote control
text buttons.
Acessing Sub-Pages
If a text page has sub-pages, press Left/Right buttons
or enter the sub-page number 0001, 0002, 0003 etc.
to access.
Revealing Concealed Text
To discover the solutions on quiz and joke pages press
the “INFO - ” button.
Holding a Page
At times it is convenient to hold a page of text. Press
OK and “HOLD” will appear in the top left of the
screen. The page will be held on screen until the
button is pressed again.
To display an initial page
Press RET/BACK to access an initial page. The one
displayed is dependant on the broadcaster.
English - 47 -
English
Appendix A: PC Input Typical Display Modes
The following table is an illustration of some of the typical video display modes. Some, due to the display
native resolution, are scaled automatically to enable correct image to be displayed.
Your TV may not support different resolutions. Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Index Resolution Frequency
1 640x400 70Hz
2 640x350 85Hz
3 640x400 85Hz
4 640x480 60Hz
5 640x480 66Hz
6 640x480 72Hz
7 640x480 75Hz
8 640x480 85Hz
9 800x600 56Hz
10 800x600 60Hz
11 800x600 70Hz
12 800x600 72Hz
13 800x600 75Hz
14 800x600 85Hz
15 832x624 75Hz
16 1024x768 60Hz
17 1024x768 66Hz
18 1024x768 70Hz
19 1024x768 72Hz
20 1024x768 75Hz
21 1024x768 85Hz
22 1152x864 60Hz
23 1152x864 70Hz
Index Resolution Frequency
24 1152x864 75Hz
25 1152x864 85Hz
26 1152x870 75Hz
27 1280x768 60Hz
28 1360x768 60Hz
29 1280x768 75Hz
30 1280x768 85Hz
31 1280x960 60Hz
32 1280x960 75Hz
33 1280x960 85Hz
34 1280x1024 60Hz
35 1280x1024 75Hz
36 1280x1024 85Hz
37 1400x1050 60Hz
38 1400x1050 75Hz
39 1400x1050 85Hz
40 1440x900 60Hz
41 1440x900 75Hz
42 1600x1200 60Hz
43 1680x1050 60Hz
44 1920x1080 60Hz
45 1920x1200 60Hz
English - 48 -
English
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)
Source
Supported
Signals
Available
EXT
(SCART)
PAL O
NTSC 60 O
RGB 50/60 O
SECAM O
Side AV
PAL 50/60 O
NTSC 60 O
SECAM O
YPbPr
480I 60Hz O
480P 60Hz O
576I 50Hz O
576P 50Hz O
720P 50Hz O
720P 60Hz O
1080I 50Hz O
1080I 60Hz O
HDMI
480I 60Hz O
480P 60Hz O
576I 50Hz O
576P 50Hz O
720P 50Hz O
720P 60Hz O
1080I 50Hz O
1080I 60Hz O
1080P
24Hz
25Hz
30Hz
50Hz
60Hz
O
Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an
inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such
a problem please contact your dealer and also the manufacturer of the source equipment.
English - 49 -
English
Appendix C: PIN Information
Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the
mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 Ground 11 NC
2 G 7 Ground 12 NC
3
B 8 Ground 13 H-sync
4
NC* 9 NC 14 V-sync
5
NC 10 Ground 15 NC
* NC = not connected
English - 50 -
English
Appendix D: Supported File Formats for USB Mode
Media Extension Format Notes
Video Audio
Movie .dat, .mpg,
.mpeg
Mpeg1,2 MPEG1/2 Layer 1/2/3,
AAC/HEAAC, AC3/EAC3,
LPCM/ADPCM
1080P@30fps 50Mbit/sec
.ts, .trp, .tp,
.m2ts
MPEG2 ,H.264, VC1, AVS,
MVC
MPEG1/2 Layer 1/2/3,
AAC/HEAAC, AC3/EAC3,
LPCM/ADPCM
H.264:1080Px2@ 25fps
1080P@50fps MVC:
1080P@24fps Other:
1080P@30fps 50Mbit/sec
.vob MPEG2 MPEG1/2 Layer 1/2/3,
AC3, LPCM
1080P@ 30fps 50Mbit/sec
.mkv MPEG1,2,4, XviD,
H.264,
VC1,WMV3,
Motion JPEG
MPEG1/2 Layer 1/2/3,
AAC/HEAAC,
AC3/EAC3, LPCM
H.264:1080Px2@25fps
1080P@50fps 1080P@30fps
50Mbit/sec
.mp4, .mov MPEG1/2 Layer 3, AAC/
HEAAC, AC3/EAC3,
LPCM/ADPCM
H.264: 1080Px2@25fps
1080P@ 50fps Other:
1080P@30fps 50Mbit/sec
.avi MPEG1,2,4
Xvid
H.264,
VC1,WMV3,
Sorenson H.263
Motion JPEG
MPEG1/2 Layer 1/2/3,
AAC/HEAAC, AC3/EAC3,
LPCM/ADPCM, WMA
H.264: 1080Px2@25fps
1080P@50fps 1080P@30fps
50Mbit/sec
.a, .v H.264,
Sorenson H.263
MPEG1/2 Layer 3, AAC/
HEAAC, LPCM/ADPCM
H.264: 1080Px2@25fps 1080P@
50fps 1080P@30fps 40Mbit/sec
.3gp MPEG4, H.264 1920x1080@30P 20Mbit/sec
.asf, .wmv MPEG2,4, XviD, H.264,
VC1,WMV3
MPEG1/2 Layer 1/2/3,
AAC/HEAAC, AC3/EAC3,
LPCM, WMA
1080P@ 30fps 50Mbit/sec
Music .mp3
-
MPEG1/2 Layer 1/2/3
(MP3)
.wav LPCM
.WMA/ASF WMA, WMA Pro
.m4a/ .aac AAC, HEAAC
Photo
.jpg, .jpeg
Baseline MAX WxH = 14592x12288
Up to 8 MegaByte
Progressive
.png
non-interlace
interlace
.bmp
Subtitle
.sub - - Sub1, Sub2, Sub3
.srt - -
English - 51 -
English
Cautions for 3D
Important information for 3D viewing
CAUTION
• The 3D function has been designed for private
use and entertainment in your home environment.
Please note that any commercial use of the 3D
function could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect the
intellectual property rights of third parties.
About handling the 3D glasses
• Do not leave the 3D glasses or the accessories
within the reach of small children. Inhaling or
swallowing them may cause suffocation or lesions
in the stomach wall. If swallowed, consult a doctor
immediately.
• Do not repair, modify, or disassemble the 3D
glasses by yourself. Doing so may cause you to
become indisposed while viewing 3D images.
• Do not expose the glasses to excessive heat
such as sunshine, re, or the like.
About the 3D glasses
• Do not use the 3D glasses if they are not working
properly or broken. Continuing to use them in such
a state may cause injury, eye strain, or indisposition.
Do not use the 3D glasses if they are broken or
have any cracks.
• Do not stand or walk while wearing 3D glasses.
You may lose your balance which could result in falls
or other accidents.
• Do not wear the 3D glasses for any purpose other
than viewing 3D programming. 3D glasses do not
function as sunglasses.
• Do not drop, exert pressure on, or step on the 3D
glasses. Doing so may damage the glass section,
which may result in injury. Exposing the 3D glasses
to liquid or excessive heat may damage the function.
• If your nose or temple turns red, or you feel
pain or discomfort, stop using the 3D glasses.
Such symptoms as above may occur if you keep
wearing them for a long time, which may also cause
indisposition.
Cautions on watching 3D images
• Some viewers may experience a seizure or
blackout when exposed to certain flashing
images or lights contained in certain 3D
television pictures or video games. Anyone who
has had a seizure, loss of awareness, or other
symptoms linked to an epileptic condition, or has a
family history of epilepsy, should contact a health
care provider before using the 3D function.
• Avoid use of the 3D function when under the
inuence of alcohol.
• If you are ill or feel ill, you should refrain from
viewing 3D images, and consult your health care
provider as may be appropriate.
• If you experience any of the following symptoms
when viewing 3D video images, stop viewing and
contact your health care provider: Convulsions,
eye or muscle twitching, loss of awareness, altered
vision, involuntary movements, disorientation, eye
strain, nausea/vomiting, dizziness, headaches.
• If you feel eye fatigue or other discomfort
from viewing 3D video images, remove the 3D
glasses and discontinue use until the condition
is eliminated.
• Viewing in 3D may cause dizziness and/or
disorientation for some viewers. Therefore,
to avoid injury do not place your TV near open
stairwells, balconies, or wires. Also do not sit near
objects that could be broken if accidentally hit.
• When viewing 3D images, always wear 3D
glasses. Watching 3D images without 3D glasses
may cause eye strain. Use specied 3D glasses.
• Do not wear 3D glasses or watch 3D images from
steep angles or while lying down. The 3D effect
is lost in these conditions and eye strain may result.
• Use the 3D glasses at the proper viewing angle
and distance. It is recommended that the viewer’s
eyes and 3D glasses are level with the screen.
• If you have prescription eye glasses or contact
lenses, wear the 3D glasses over them. Watching
3D images without appropriate eyewear may cause
eye strain.
• If 3D images often appear in double or if you
cannot see the images in 3D, stop viewing.
Continuous viewing may cause eye strain.
• Due to the possible impact on vision
development, viewers of 3D video images should
be age 6 or above. Children and teenagers may be
more susceptible to health effects from viewing 3D
images and should be closely supervised.
English - 52 -
English
Cautions and Other Information for 3D
• For optimal 3D effect and to avoid eye fatigue it is
important that you properly select your viewing
position. The best viewing position is with your
eyes at the same level as the center of the display
IMPORTANT: If you see a double image, your
eyes are either too high or too low in relation to the
horizontal center of the screen.
Adjust your position so that it is closer to the center
to avoid eye fatigue and to enjoy optimum 3D effects.
• Watching TV while sitting too close to the screen
for an extended period of time may cause eye
strain. The ideal viewing distance should be at least
three times the screen height.
• Switching left and right images. The left and right
eye shutter timing of the glasses can be swapped.
If 3D images look blurred, switch the left and right
sides of the 3D image.
Notes on watching the TV
• 3D effect and image quality may vary depending
upon content quality and display device capability/
functionality/settings.
• If you use any device, such as a mobile phone or
mobile wireless device, near the 3D glasses, the
3D glasses may not work correctly.
• Use the product in the following temperature
range; otherwise, the quality of the 3D image or
the reliability of the product cannot be guaranteed.
– 3D glasses: 0 °C - 50 °C
– TV: 5 °C - 35 °C (41 °F - 94 °F)
• If you use a fluorescent light, it may flicker
depending on the frequency of the light. In this
case, reduce the brightness of the uorescent
light, or use another light. (It is not recommended
to watch the TV in a dark room, especially for
children.)
• Wear the 3D glasses properly, otherwise you
may not see the correct 3D image.
• When not viewing 3D images on this unit, take
off the 3D glasses; otherwise, it may be difcult
to see the display on other products such as PC,
digital clock or calculator, etc.
• To active the 2D to 3D conversion function set
the Virtual 3D option in the 3D Settings menu
as On.
• The 2D to 3D conversion function is meant
for enjoyment of 2D home video, and other 2D
content you create, in 3D according to your
personal preferences.
Note: The effect you may see depends on Picture content.
• The 2D to 3D conversion function is not intended
for use with pre-recorded 2D copyrighted
content owned by a third-party unless the
copyright owner has given direct or indirect
permission, or unless applicable law permits
such use.
About the connecting cable
• Use a high-speed and high-quality HDMI
cable when you connect a device such as 3D
compatible BD player or PC to the TV. When
you use a standard HDMI cable, 3D images may
not be shown.
English - 53 -
English
Specications and Accessories
Broadcast Systems/Channels
DVB-T MPEG2, DVB-T MPEG4 HD,
DVB-C MPEG2, DVB-C MPEG4
Video Input PAL, SECAM, NTSC 4.43
Stereo Nicam
External Connections
1-SCART 1 Input 21-pin SCART RGB, A/V
2-SCART-2 Input 21-pin SCART RGB, A/V, S-Video
3-SIDE AV Input Side AV Cable input Video + Audio L + R
4-HDMI Input Type A
5-PC Input Mini D-Sub 15-Pin Analogue RGB Signal
6-Digital Audio Output S/PDIF (Optical)
7-YPbPr Input Y+Pb+Pr Video RCA
8-Audio In Input RCA Audio L + R
9-LAN port RJ-45
10-Subwoofer Output RCA Audio
USB Ports Media Browser Interface Version: USB 2.0
USB Class: Mass Storage
File System: FAT32
For sets with built in wireless unit
the Home network with a wireless
router must be compatible with; IEEE 80211 a/b/g/n
Security Protocols WEP 64/128, WPA, WPA2, TKIP, AES, WAPi.
Headphone Socket 3.5mm stereo
Operating Conditions Temperature 5°C - 35°C (41°F - 94°F)
Humidity 20 - 80% (non-condensing)
Supplied Accessories Remote Control
2 batteries (AAA,IEC R03 1.5V)
Four screws
Side AV cable
Stand xing cover
P Clip
2 Active Shutter 3D Glasses
48” T
Energy Efciency Class A ++
Visible Screen Size (approx.) 121 cm / 48”
On Mode Power Consumption (approx.) (*) 44 W
Annual Power Consumption (approx.) (**) 64 kWh
Standby Power Consumption (approx.) < 0.50 W
Screen Resolution (pixels) 1920 x 1080
Display 16:9
Sound Output (at 10% distortion) 2 x 8
Power Consumption Model (approx.) 90 W
Weight TV with stand 18.5 kg
Gross weight 24.0 kg
TV without stand 15.5 kg
(*) Tested in accordance with IEC 62087-BD in default settings.
(**) Energy consumption 64 kWh per year, based on the power consumption of the television operating 4 hours per day for
365 days. The actual energy consumption will depend on how the television is used.
Unit Dimensions (Approximate)
Specication is subject to change without notice.
A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)
48T543*DG 1092.2 643.5 250.1 105.4 697.7 400.0 400.0
English - 54 -
English
License Information
• The terms HDMI and High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• DVB is a registered trademark of the DVB Project.
• [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception of high-denition video signals. Because this is an
evolving technology, it is possible that some devices may not operate properly with the television.
• YouTube and the YouTube logo are trademarks of Google Inc.
MP3 licence letter
MPEG Layer-3 audio coding technology licensed from Fraunhofer LLS and Thomson.
MP4 licence letter
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR (II) DECODING MPEG-4 VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE
IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT
RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA,L.L.C. SEE HTTP://WWW.MPEGLA.COM
AVC licence letter
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE HTTP://WWW.MPEGLA.COM
Licence Notication
TRADEMARK ACKNOWLEDGMENT
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Disposal...
The following information is only for EU-member states:
Disposal of products
The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately
from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
visit our website (www.toshiba.eu/recycling) or contact your local city ofce or the shop where you purchased the
product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specied values of lead (Pb), mercury (Hg), and/or cadmium
(Cd) dened in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or
cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health. For
more detailed information about the coIIection and recycling programmes available in your country, please visit our
website (www.toshiba.eu/recycling) or contact your local city ofce or the shop where you purchased the product.
English - 55 -
English
Q & A Section
Question
Answer
Sound
Why is there no sound or picture?
Check if the TV is not in standby mode
Check the mains plug and all mains connections
Why is there a picture but no sound?
Check if the volume has not been turned off or sound mute has
not been selected
Why does the sound come only from
one speaker when stereo sound is
selected?
Check the balance in the SOUND menu if it has been set to one
side or not
Why is the soundtrack in English
when a different audio language has
been selected?
The programme is currently being broadcast with an English
soundtrack only
Picture
What can cause a poor picture? Interference or a weak signal. Try a different TV station
Why isn't the video / DVD being
played shown on screen?
Make sure the Blu-ray or DVD player is connected to the TV as
illustrated in the beginning chapters, then select the correct input
by pressing the SOURCE - button on the remote
Why is the Blu-ray / DVD player in
black and white?
Check if the correct input has been chosen or not
Why are there horizontal stripes and/
or blurred images on the screen
when in PC mode?
The phase may need adjusting. Select PC settings and highlight
Phase and adjust until the picture is clear
General
Why doesn't the remote control
work?
Check if the batteries are exhausted or inserted incorrectly
Why doesn't the Media browser
feature operate?
Make sure the USB stick / HDD is connected correctly. Incorrect
operation may occur from a USB Hub connection.
Check your network setup if using a media server
Why digital subtitles are not shown
on screen when they are selected?
Subtitles are not currently being transmitted by the broadcaster
Why is the digital channel locked? Parental control is activated. Check parental settings
Why are some encrypted digital
channels unavailable?
Your subscription needs upgrading. Contact your service provider
Why does the active standby LED
sometimes take longer to go out?
When in active standby, the TV's active standby will automatically
search all available channels for updates, provided automatic update
is enabled. The required time to do this may vary. Led blinks as red
and green in this mode
Why don’t the controls of the TV
work?
Check if CHILD LOCK is selected or not
What is DVB-T? Digital Video Broadcast via an aerial / antenna
What is DVB-C? Digital Video Broadcast via a cable system
How are radio channels selected? You can select them via Channel list
What can be done if the PIN is
forgotten?
You can reset the TV and perform the First Time Installation again.
Ensure that no one else is aware of this procedure by securely storing
the Owner’s Manual
If you are asked to enter a PIN to perform the First Time Installation
consult your authorized retailer
Why don't the networked devices
work?
Check the LAN cables if they are connected properly or not.
If it is wireless connection, make sure the wireless network settings
are done accordingly
Why doesn’t the recording function
work?
Try switching off the TV and then re-inserting the USB device
while the TV is switched off
Why “USB is too slow” message
is displayed on the screen while
starting a recording?
Try restarting the recording. If you still get the same error,
it is possible that your USB disk does not meet the speed
requirements. Try connecting another USB disk
English - 56 -
English
REACH information
The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization
and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018.
Toshiba will meet all REACH requirements and is committed to provide our customers with
information about the presence in our articles of substances included on the candidate list according
to REACH regulation.
Please consult the following website www.toshiba.eu/reach for information about the presence in
our articles of substances included on the candidate list according to REACH in a concentration
above 0.1 % weight by weight.
Toshiba herby declares that this product with an integrated Wireless Function is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
EU Conformity Statement
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is TOSHIBA, 23 Davy Road, Plymouth, PL6 8BY UK.
This product is labeled with the CE Mark in accordance with the related European Directives, notably
Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS
Directive 2011/65/EU. Furthermore the product complies with the Ecodesign Directive 2005/32/EC (EuP)
and 2009/125/EC (ErP) and its related implementing measures.
If this product has an integrated Wireless LAN feature, the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC is also applicable.
© TOSHIBA 23 Davy Road, Plymouth Devon PL6 8BY England
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
This equipment corresponds to requirements of the Technical Regulation on limitation of usage of certain
dangerous substances in electrical and electronic equipment.
… 12 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba 48T5435 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba 48T5435 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Toshiba 48T5435

Toshiba 48T5435 Gebruiksaanwijzing - Nederlands - 61 pagina's

Toshiba 48T5435 Gebruiksaanwijzing - Deutsch - 63 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info