462441
46
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
HL117 (E/F) Web 213:276
HIGH-DEFINITION TELEVISION
26AV500U
32AV500U
37AV50U
37AV500U
42AV500U
VX3A00016400
HDA51V3201I
Integrated High Definition
LCD Television
© 2008 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
For an overview of steps for setting up your new TV, see page 9.
Note: To display a High Definition picture, the TV must be receiving a
High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High Definition
digital satellite program). For details, please contact your TV antenna
installer, cable provider, or satellite provider.
Dear Customer,
Thank you for purchasing this Toshiba LCD TV. This manual
will help you use the many exciting features of your new LCD
TV. Before operating your LCD TV, please read this manual
completely, and keep it nearby for future reference.
Safety Precautions
WARNING
: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions.
See item 20 on page 3 and instructions on page 5.
WARNING
: If you decide to wall mount this television,
always use a UL Listed wall bracket appropriate for the size
and weight of this television. For more detail about UL Listed
wall bracket, contact a Toshiba Authorized Service Center.
The use of any wall bracket other than a UL Listed wall
bracket appropriate for the size and weight of this television
for wall mounting this television could result in serious bodily
injury and/or property damage. See “Removing the Pedestal
Stand” (
page 5).
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s attention
to Article 820-40 of the U.S. NEC, which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical. For
additional antenna grounding information, see items 27 and
28 on page 4.
Congratulations on your purchase! As you enjoy your
new product, please keep these safety tips in mind:
The Issue
• The home theater entertainment experience is a growing trend
and larger flat panel displays are popular purchases. However,
flat panel displays are not always supported on the proper stands
or installed according to the manufacturer’s recommendations.
• Flat panel displays that are
inappropriately situated on dressers,
bookcases, shelves, desks,
speakers, chests or carts may fall
over and cause injury.
TOSHIBA Cares!
• The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
Tune Into Safety
One size does NOT fit all. Follow the manufacturer’s recommendations
for the safe installation and use of your flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don’t allow children to climb on or play with furniture and
television sets.
• Don’t place flat panel displays on
furniture that can easily be used as
steps, such as a chest of drawers.
• Remember that children can
become excited while watching a
program, especially on a “larger
than life” flat panel display. Care
should be taken to place or install
the display where it cannot be
pushed, pulled over, or knocked down.
• Care should be taken to route all cords and
cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
Wall Mounting: If you decide to wall mount your
flat panel display, always:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory (such
as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount
manufacturers.
• If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.
• Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted
to walls with steel studs or old cinder block construction. If you
are unsure, contact a professional
installer.
• A minimum of two people are
required for installation. Flat panel
displays can be heavy.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat
Panel Display
Important Safety Instructions
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
Additional Safety Precautions
14a) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV does not
operate normally, take the following precautions:
ALWAYS turn off the TV and unplug the power cord to
avoid possible electric shock or fire.
NEVER allow your body to come in contact with any
broken glass or liquid from the damaged television.
The LCD panel inside the TV contains glass and a
toxic liquid. If the liquid comes in contact with your
mouth or eyes, or your skin is cut by broken glass,
rinse the affected area thoroughly with water and
consult your doctor.
ALWAYS contact a service technician to inspect the
TV any time it has been damaged or dropped.
15) CAUTION:
To reduce the risk of electric shock, do not use the
polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
To prevent electric shock, match wide blade of plug to
wide slot; fully insert.
16) WARNING:
To prevent the spread of fire, keep candles or other open
flames away from this product at all times.
Installation, Care, and Service
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
17) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
18) DANGER: RISK OF SERIOUS
PERSONAL INJURY, DEATH,
OR EQUIPMENT DAMAGE!
Never place the TV on an
unstable cart, stand, or table. The TV
may fall, causing serious personal
injury, death, or serious damage to the TV.
19) To avoid damage to this product, never place or store the
TV in direct sunlight; hot, humid areas; or areas subject
to excessive dust or vibration.
20) Always place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit. To secure
the TV, use a sturdy strap from the hooks on the rear of
the TV to a wall stud, pillar, or other immovable structure.
Make sure the strap is tight, secure, and parallel to the
floor.
pot VTedis VT
4"
min.
Hook
Sturdy strap (as short as possible)
21) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
22) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:
on a bed, sofa, rug, or similar
surface;
too close to drapes, curtains,
or walls; or
in a confined space such as
a bookcase, built-in cabinet,
or any other place with poor
ventilation.
The slots and openings are provided to protect the TV from
overheating and to help maintain reliable operation of the
TV. Leave a space of at least 4 (four) inches around the TV.
(continued)
.
Grounding
prong
23) Always place the back of the television at least four (4)
inches away from any vertical surface (such as a wall) to
allow proper ventilation.
24) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
25) Never overload wall outlets and extension cords.
26) Always operate this equipment from a 120 VAC, 60 Hz
power source only.
27) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of
the National Electric Code).
Antenna lead-in wire
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Power service grounding electrode
system (NEC Art 250 Part-H)
Ground clamp
Electric service equipment
Ground clamps
28)
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
Use extreme care to make sure you are never in a
position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
Never attempt to install any of the following during
lightning activity: a) an antenna system; or b) cables,
wires, or any home theater component connected to
an antenna or phone system.
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
29) If you use the TV in a room whose temperature is 32 °F
(0 °C) or below, the picture brightness may vary until the
LCD warms up. This is not a sign of malfunction.
30) Always unplug the TV before
cleaning. Gently wipe the
display panel surface (the TV
screen) using a dry, soft cloth
only (cotton, flannel, etc.). A
hard cloth may damage the
surface of the panel. Avoid
contact with alcohol, thinner, benzene, acidic or alkaline
solvent cleaners, abrasive cleaners, or chemical cloths,
which may damage the surface. Never spray volatile
compounds such as insecticide on the cabinet. Such
products may damage or discolor the cabinet.
31)
WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the TV
cabinet slots.
32) While it is thundering, do not touch the connecting cables
or apparatus.
33) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect
the antenna from the TV if you leave the TV unattended
or unused for long periods of time.
34) During normal use, the TV may make occasional
snapping or popping sounds. This is normal, especially
when the unit is being turned on or off. If these sounds
become frequent or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
35)
DANGER: RISK OF
SERIOUS PERSONAL
INJURY OR DEATH!
Never strike the screen with a sharp
or heavy object.
36) The LCD screen of this product can be damaged by
ultraviolet radiation from the sun. When selecting a
location for the television, avoid locations where the
screen may be exposed to direct sunlight, such as in
front of a window.
Never touch, press, or place anything on the LCD
screen. These actions will damage the LCD screen.
If you need to clean the LCD screen, follow the
instructions in item 30 on this page.
Service
37)
WARNING:
RISK OF ELECTRIC SHOCK!
Never attempt to service the TV yourself. Opening and
removing the covers may expose you to dangerous
voltage or other hazards. Failure to follow this WARNING
may result in death or serious injury. Refer all servicing
not specified in this manual to a Toshiba Authorized
Service Center.
38) If you have the TV serviced:
Ask the service technician to use only replacement
parts specified by the manufacturer.
Upon completion of service, ask the service technician
to perform routine safety checks to determine that the
TV is in safe operating condition.
39) The cold cathode fluorescent lamp in the LCD panel
contains a small amount of mercury.
When the TV reaches the end of its useful life, dispose
of the used TV by the approved method for your area, or
ask a qualified service technician to properly dispose of
the TV.
Note: The lamp(s) inside this product contain
mercury. Disposal may be regulated due to
environmental considerations. For disposal or
recycling information, contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).
Choosing a location for your LCD TV
To Display your LCD TV on the included Pedestal
Stand:
Observe the following safety precautions:
1) Read and Follow the pedestal assembly instructions.
CAUTION:
Before beginning pedestal assembly, carefully
lay the front of the LCD Panel face down on a flat, cushioned
surface such as a quilt or blanket. Leave the bottom of the unit
protruding over the edge of the surface and assemble the pedestal
as indicated below.
Note:
Extreme care should always be used when attaching
the pedestal stand to avoid damage to the LCD panel.
2) Place the TV on a sturdy, level surface that can support the
weight of the TV.
3) Be sure to secure the TV to a wall, pillar, surface, or other
immovable structure. (
item 20, page 3).
To Display your LCD TV using a Wall Bracket:
If you decide to wall mount your LCD TV, always use a UL-
listed wall bracket appropriate for the size and weight of the
LCD TV (
page 2) :
1)
CAUTION:
Two people are required for installation.
2) Unplug and remove any cables and/or other component
connectors from the rear of the TV.
3) Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s) are
attached to the wall and the back of the TV as described in the
instructions provided with the wall bracket.
4) Remove the screws of the VESA Mounting Pattern show in
the right diagram.
5) After attaching the appropriate bracket(s) to the wall and the
back of the TV, remove the pedestal stand from the TV as
described below.
6) VESA Mounting Pattern
TV Size Hole Pattern(VxH) Screw Size
26” 100x200 mm M4
32”/ 37”/ 42” 200x400 mm M6
(unit in mm)
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.
Note:
Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel.
2) Remove the screws shown in the right diagram . This will
allow removal of the pedestal stand.
3) Once you have removed all screws holding the pedestal stand
in place, remove the pedestal stand from the TV.
Six screws
Four screws
Four screws
6” TV
”/ 7” TV
” TV
VESA Mounting Pattern
VESA Mounting Pattern
VESA Mounting Pattern
6
FCC Declaration of Conformity
Compliance Statement
(Part 15):
The Toshiba 26AV500U, 32AV500U, 37AV50U, 37AV500U
and 42AV500U Televisions comply with Part 15 of the FCC
rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
removing and applying power to the equipment, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Caution: Changes or modifications to this equipment not
expressly approved by Toshiba could void the user’s authority
to operate this equipment.
Important notes about your LCD
TV
The following symptoms are technical limitations of LCD
Display technology and are not an indication of malfunction;
therefore, Toshiba is not responsible for perceived issues
resulting from these symptoms.
An afterimage (ghost) may appear on the screen if a fixed,
nonmoving image is displayed for a long period of time. The
afterimage is not permanent and will disappear in a short
period of time.
The LCD panel contained in this TV is manufactured using
an extremely high level of precision technology; however,
there may be an occasional pixel (dot of light) that does not
operate properly (does not light, remains constantly lit, etc.).
This is a structural property of LCD technology, is not a
sign of malfunction, and is not covered under your warranty.
Such pixels are not visible when the picture is viewed from a
normal viewing distance.
Note: Interactive video games that involve shooting a “gun”
type of joystick at an on-screen target may not work with this
TV.
Trademark Information
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
1)
2)
7
Contents
Important Safety Instructions .......................
Installation, Care, and Service .....................
Chapter 1: Introduction ..............................
8
Welcome to Toshiba .................................................................8
Features of your new TV .........................................................8
Overview of steps for installing, setting up, and using
your new TV ..................................................................... 9
TV front and side panel controls and connections ................10
TV back panel connections ....................................................11
Chapter : Connecting your TV ....................
1
Overview of cable types ........................................................12
About the connection illustrations .........................................12
Connecting a VCR and antenna or Cable TV
(no Cable box)................................................................13
Connecting a VCR with S-video and a cable box ................. 14
Connecting a DVD player with ColorStream
®
(component
video), a VCR, and a satellite receiver ............................15
Connecting a camcorder ........................................................16
Connecting an HDMI™ or DVI device to the HDMI input ..17
Connecting a digital audio system .........................................18
Connecting an audio system ..................................................18
Connecting a personal computer (PC) ...................................19
Chapter : Using the remote control ..............
0
Preparing the remote control for use .....................................20
Installing the remote control batteries ...................................20
Remote control effective range ..............................................20
Learning about the remote control .........................................21
Using the remote control to control your other devices ........22
Remote Control functional key chart .....................................23
Programming the remote control to control your other
devices .............................................................................24
Remote control codes ............................................................25
Chapter : Menu layout and navigation ..........
7
Main menu layout .................................................................. 27
Navigating the menu system ..................................................28
Chapter : Setting up your TV ......................
9
Selecting the menu language .................................................29
Configuring the antenna input source for the
ANT/CABLE terminal ....................................................29
Viewing the digital signal meter ............................................29
Viewing the system status ......................................................29
Programming channels into the TV’s channel memory ........30
Programming channels automatically .............................30
Manually adding channels in the channel memory .........30
Manually deleting channels in the channel memory .......31
Channel Labels Menu .....................................................31
Chapter 6: Using the TV’s features ................

Selecting the video input source to view ...............................32
Tuning channel ..................................................................... 32
Favorites Browser ...........................................................32
Tuning to the next programmed channel ........................ 32
Tuning to a specific channel (programmed or
unprogrammed) ........................................................32
Switching between two channels using Channel Return 32
Selecting the picture size .......................................................33
Adjusting the picture .............................................................34
Selecting the picture mode ..............................................34
Adjusting the picture quality ...........................................35
Using the closed caption mode .............................................. 35
Base closed captions .......................................................35
Digital CC Settings ........................................................36
Adjusting the audio ................................................................36
Muting the sound ............................................................36
Selecting stereo/SAP broadcasts .....................................36
Adjusting the audio quality ............................................. 37
Selecting the optical output format .................................38
Using the Parental Control menu ...........................................38
Entering the PIN code ..................................................... 38
Changing your PIN code .................................................39
If you still cannot remember your PIN code ...................39
Blocking TV programs and movies by rating (V-Chip) ..39
Using the PC settings feature.................................................40
Setting the PC Audio .............................................................41
Setting the sleep timer ...........................................................41
Setting the time zone .............................................................42
Displaying TV status information .........................................42
Understanding the auto power off feature .............................42
Understanding the last mode memory feature .......................42
Chapter 7: Using the TV’s advanced features ...

Using the advanced picture settings features .........................43
Using Dynamic Contrast .................................................43
Using DynaLight™ .........................................................43
Backlight Adjustment......................................................43
Using the static gamma feature .......................................44
Using the auto aspect ratio feature ..................................44
Selecting the color temperature ......................................45
Using MPEG Noise Reduction .......................................45
Using CableClear
®
digital noise reduction .....................45
Chapter 8: Troubleshooting .........................
6
General troubleshooting ........................................................46
LED indications ..................................................................... 47
Chapter 9: Appendix .................................
8
Specifications .........................................................................48
Limited United States Warranty
for LCD Televisions 26” and Larger
.......................
50
Limited Canadian Warranty
for Toshiba Brand Flat Panel Televisions
..................
51
8
Welcome to Toshiba
Thank you for purchasing this Toshiba LCD TV, one of
the most innovative LCD TVs on the market. This digital
television is capable of receiving analog basic, digital basic
and digital unencrypted cable television programming
by direct connection to a cable system providing such
programming. Certain advanced and interactive digital
cable services such as video-on-demand, a cable operator's
enhanced program guide and data-enhanced television
services may require the use of a set-top box. For more
information call your local cable operator.
Features of your new TV
The following are just a few of the many exciting features of
your new Toshiba widescreen, integrated HD, LCD TV:
Integrated digital tuning (8VSB ATSC and QAM)
eliminates the need for a separate digital converter set-top
box (in most cases).
Two HDMI™ digital, high-definition multimedia
interfaces 1080i input support (page 17).
HDMI™ (V.1.3 with Lip Sync)
Lip-Sync allows HDMI source devices to accurately
perform synchronization automatically.
Two sets of ColorStream
®
HD high-resolution component
video inputs (page 15).
Digital Audio Out optical audio connection with Dolby
®
Digital optical output format (page 18).
CableClear
®
digital picture noise reduction (page 45).
PC IN (Analog RGB) computer terminal (page 19).
Channel Labels allows you to put the Call Letters (e.g.
ABC, HBO, etc.) on the screen along with the station
numbers, so you always know what you’re watching
(page 31).
Chapter 1: Introduction
Chapter 1: Introduction
9
Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using its many
exciting features.
Carefully read the important safety, installation, care,
and service information. Keep this manual for future
reference.
Observe the following when choosing a location for the
TV:
Read “Important notes about your LCD TV”
(page 6).
Place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit. Secure
the TV to a wall, pillar, or other immovable structure
( page 3).
Place the TV in a location where light does not reflect
on the screen.
Place the TV far enough from walls and other objects
to allow proper ventilation. Inadequate ventilation may
cause overheating, which will damage the TV. THIS
TYPE OF DAMAGE IS NOT COVERED UNDER
THE TOSHIBA WARRANTY.
Do not plug in any power cords until AFTER you have
connected all cables and devices to your TV.
BEFORE connecting cables or devices to the TV, learn
the functions of the TV’s connections and controls
(pages 10–11).
Connect your other electronic device(s) to the TV
(pages 12–19).
Install the batteries in the remote control (page 20).
See “Learning about the remote control” (page 21) for
an overview of the buttons on the remote control.
Program the remote control to operate your other
device(s) (pages 22–26).
AFTER connecting all cables and devices, plug in the
power cords for your TV and other devices. The LED
indication will be red when the TV is on standby mode.
The LED indication will be green when press POWER
on the TV control panel or remote control to turn on the
TV.
1�
2�
3�
4�
5�
6�
7�
8�
9�
See “Menu layout and navigation” for a quick overview
of navigating the TV’s menu system (page 27).
Program channels into the TV’s channel memory
(page 30).
For details on using the TV’s features, see Chapters 6
and 7.
For help, refer to the Troubleshooting Guide, Chapter 8.
For technical specifications and warranty information,
see Chapter 9.
Enjoy your new TV!
10�
11�
12�
13�
14�
15�
Chapter 1: Introduction
10
TV front and side panel controls and connections
POWER
POW E R
3
3
4
5
6
7
8
9
10
6
10
45
9
78
1 2
Green and Red LEDs
Green = Power On
Red = Power off (standby mode)
See “LED indications” on page 47 for additional
information.
Remote sensor — Point the remote control toward this
remote sensor ( “Remote control effective range” on
page 20).
VIDEO 2 IN — The side panel A/V connections are
referred to as “VIDEO 2” and include standard A/V
connections.
POWER — Press to turn the TV on and off.
MENU (ENTER) — Press to access the menu system
(pages 27–28). When a menu is on-screen, the MENU
button on the TV’s control panel functions as the ENTER
button.
CHANNEL pqWhen no menu is on-screen, these
buttons change the channel (programmed channels only;
page 30).
1�
2�
3�
4�
5�
6�
VOLUME tu — These buttons adjust the volume level.
INPUT — Repeatedly press to change the source you
are viewing (ANT, VIDEO 1, VIDEO 2, ColorStream
HD1, ColorStream HD2, HDMI 1, HDMI 2, PC).
EXIT — Press to instantly close an on-screen menu.
ARROWS pqtu — When a menu is on-screen, these
buttons function as up/down/left/right menu navigation
buttons.
7�
8�
9�
10�
6”/ ”/ 7” TV Control panel
” TV Control panel
TV front
6”/ ”/ 7” TV
Left side panel
” TV
Right side panel
Chapter 1: Introduction
11
TV back panel connections
For an explanation of cable types and connections, see pages 12–19.
HDMI™ IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital
video from an HDMI device or uncompressed digital
video from a DVI device. Also see item 2. HDMI
connection is necessary to receive 1080i signals.
PC IN (AUDIO)— PC audio input terminals are shared
with HDMI 1 analog audio input terminals.
PC IN (RGB)— For use when connecting a personal
computer.
Service — For service use only. Used for updating the
television’s firmware.
ColorStream
®
HD 1 and ColorStream
®
HD 2
Two sets of ColorStream
®
high-definition component
video inputs (with standard stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
®
.
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
1�
2�
3�
4�
5�
Audio OUTAnalog audio outputs for connecting an
audio amplifier.
VIDEO 1 IN — Standard (composite) video and standard
audio inputs plus optional S-video inputs for connecting
devices with composite video or S-video output.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.
Digital Audio OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
ANT/CABLEAntenna input that supports analog
(NTSC) and digital (ATSC) off-air antenna signals and
analog and digital Cable TV (QAM) signals.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
6�
7�
8�
9�
AV00U
7AV0U
7AV00U
AV00U
6”TV ”/ 7” TV
” TV
6AV00U
Power cord
Power cord
1
Overview of cable types
Cables can be purchased from most stores that sell audio/
video devices. Before purchasing any cables, be sure of con-
nector types required by your devices and the length of each
cable.
Coaxial (F-type) cable
Coaxial (F-type) cable is used for connecting your antenna,
cable TV service, and/or cable converter box to the ANT/
CABLE input on your TV.
Standard A/V cables (red/white/yellow)
Standard A/V cables (composite video) usually come in sets
of three, and are for use with video devices with analog audio
and composite video output. These cables (and the related
inputs on your TV) are typically color-coded according to
use: yellow for video, red for stereo right audio, and white for
stereo left (or mono) audio.
S-video cable
S-video cable is for use with video devices with S-video
output. Separate audio cables are required for a complete
connection.
Note: An S-video cable provides better picture performance
than a composite video cable. If you connect an S-video cable,
be sure to disconnect the standard (composite) video cable or
the picture performance will be unacceptable.
Component video cables (red/green/blue)
Component video cables come in sets of three and are for
use with video devices with component video output.
(ColorStream
®
is Toshiba’s brand of component video.) These
cables are typically color-coded red, green, and blue. Separate
audio cables are required for a complete connection.
Note: Component video cables provide better picture
performance than a standard (composite) video or S-video
cable.
HDMI™ cable (with HDMI Logo “ ”)
HDMI (High-Definition Multimedia Interface) cable is for
use with devices with an HDMI output. An HDMI cable de-
livers digital audio and video in its native format. This cable
carries both video and audio information; therefore, separate
audio cables are not required for a complete HDMI device
connection (page 17 and page 19).
Note: HDMI cable provides better picture performance than a
standard (composite) video or S-video cable.
Optical audio cable
Optical audio cable is for connecting receivers with Dolby
Digital or PCM (pulse-code modulation) optical audio input
to the TV’s DIGITAL AUDIO OUT terminal (page 18).
Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable is for connecting a PC
to the TV’s PC IN terminal (page 19).
About the connection illustrations
You can connect different types and brands of devices to your
TV in several different configurations. The connection il-
lustrations in this manual are representative of typical device
connections only. The input/output terminals on your devices
may differ from those illustrated herein. For details on con-
necting and using your specific devices, refer to each device’s
owner’s manual.
Chapter 2: Connecting your TV
Chapter 2: Connecting your TV
1
Connecting a VCR and antenna or Cable TV (no Cable box)
You will need:
coaxial cables
standard A/V cables
For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
If you have a mono VCR, connect L/MONO on the TV
to your VCR’s audio out terminal using the white audio
cable only.
To view the antenna or Cable signal:
Select the ANT video input source on the TV.*
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
*
Stereo VCR
Chapter 2: Connecting your TV
1
Connecting a VCR with S-video and a cable box
An S-video connection will provide better picture performance than a standard (composite) video cable.
IN from ANT
VIDEO AUDIO
OUT to TV
L R
R
L
OUT
IN
CH 3
CH 4
IN
OUT
CH 3
CH 4
You will need:
coaxial cables
S-video cable
Do not connect both types of video cable to VIDEO 1
at the same time or the picture performance will be
unacceptable.
standard audio cables
If you have a mono VCR, connect L/MONO on the TV
to your VCR’s audio out terminal using the white audio
cable only.
Note: When you use a Cable box, you may not be able to use
the remote control to program or access certain features on
the TV.
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT video input source on
the TV.* Tune the TV to channel 3 or 4 (whichever channel
the Cable box output is set to). Use the Cable box controls to
change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
*
From Cable TV
Cable box
Stereo VCR
Chapter 2: Connecting your TV
1
Connecting a DVD player with ColorStream
®
(component video), a VCR,
and a satellite receiver
Your TV has two sets of ColorStream
®
(component video) inputs.
IN from ANT
VIDEO AUDIO
OUT to TV
L R
R
L
OUT
IN
CH 3
CH 4
VIDEO
OUT
COMPONENT VIDEO
P
B
P
R
Y
AUDIO
OUT
L
R
S-VIDEO
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
COMPONENT VIDEO
L
R
Satellite
IN
P
B
P
R
Y
You will need:
coaxial cables
standard A/V cables
For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
If you have a mono VCR, connect L/MONO on the TV
to your VCR’s audio out terminal using the white audio
cable only.
standard audio cables
component video cables
You can connect the component video cables (plus
audio cables) from the DVD player or satellite receiver to
either set of ColorStream terminals on the TV (HD 1 or
HD 2). The ColorStream HD 1 and HD 2 terminals can
be used with Progressive (480p, 720p) and Interlaced
(480i, 1080i) scan systems. A 1080i signal will provide
the best picture performance (1080p is not supported).
If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel. If your DVD player has HDMI
video, see page 17.
To view antenna or Cable channels:
Select the ANT video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream HD 1
video input source on the TV.*
To view satellite programs using the component
video connections:
Turn on the satellite receiver. Select the ColorStream HD 2
video input source on the TV.*
To view the VCR or view and record antenna chan-
nels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO 1 video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record.
Select the ColorStream HD 1 video input source on the TV*
to view the DVD.
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and criminal
liability.
*
From antenna
DVD player with component video
Stereo VCR
Satellite receiver with component video
From satellite dish
Chapter 2: Connecting your TV
16
Connecting a camcorder
You will need:
standard A/V cables
For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to VIDEO 1 on the TV back instead of the VIDEO 2 on the
TV side panel.
VIDEO
AUDIO
OUT
L
R
VIDEO
AUDIO
OUT
L
R
To view the camcorder video:
Select the VIDEO 2 video input source on the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
*
" TV
6"/ "/ 7" TV
Camcorder
Camcorder
Chapter 2: Connecting your TV
17
Connecting an HDMI™ or DVI
device to the HDMI input
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source device,
or uncompressed digital video from a DVI (Digital Visual
Interface) source device. This TV is able to connect with
HDMI devices. But it is possible that same HDMI devices
may not operate properly with this TV.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form
from EIA/CEA-861-D–compliant
[1]
consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
The HDMI 1 input can accept and display VGA, SVGA,
XGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), and 1080i
(60Hz) signal formats. For detailed signal specifications, see
page 49.
Supported Audio format: Linear PCM, sampling rate 32/44.1/
48 kHz
Note: To connect a PC to the HDMI input, see page 19.
To connect an HDMI device, you will need:
one HDMI cable (type A connector) per HDMI device
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo ( ).
To display an 1080i/60Hz signal format, you will need a
Category 2 cable. Conventional HDMI/DVI cable may
not work properly.
HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration).
VIDEO AUDIO
L R
R
L
IN
OUT
IN
HDMI OUT
To view the HDMI device video:
Select the HDMI 1 or HDMI 2 video input source on the TV.*
To select the video input source, press
INPUT
on the remote
control (
page 21). To program the TV remote control to operate
other devices, see Chapter 3.
*
To connect a DVI device, you will need:
one HDMI-to-DVI adapter cable (HDMI type A connector)
per DVI device
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
one pair of standard analog audio cables per DVI device
An HDMI-to-DVI adapter cable transfers video only.
Separate analog audio cables are required (see
illustration).
VIDEO AUDIO
L R
R
L
OUT
IN
DVI/ HDCP
OUT
IN
Note: To ensure that the HDMI or DVI device is reset properly,
it is recommended that you follow these procedures:
When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception
of highdefinition video signals. Because this is an evolving
technology, it is possible that some devices may not operate
properly with the TV.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
HDMI device
DVI device
Chapter 2: Connecting your TV
18
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
*
Digital or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby
®
Digital
decoder or other external audio system with optical audio
input.
You will need:
optical audio cable (Use an optical audio cable that has
the larger “TosLink” connector and not the smaller “mini-
optical” connector.)
LINE IN
Optical
Audio IN
L R
To control the audio:
Turn on the TV and the digital audio device.
Press on the TV’s remote control and open the Audio
menu.
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
( “Selecting the optical audio output format” on
page 38).
1�
2�
3�
Note:
Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers. THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
Manufactured under license from Dolby Laboratories. Dolby,
and the double-D symbol are registered trademarks of Dolby
Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You will need:
standard audio cables
LINE IN
L R
To control the audio:
Turn on the TV and the stereo amplifier.
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the
TV’s volume control or the amplifier’s volume control.
Menu item of Speakers can turn to OFF to mute the TV’s
built in speakers.
*
1�
2�
3�
Dolby Digital decoder or
other digital audio system
Analog audio amplier
Chapter 2: Connecting your TV
19
Connecting a personal computer
(PC)
With either the PC IN or HDMI connection, you can watch
your computer’s display on the TV and hear the sound from
the TV’s speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV,
use an analog RGB (15-pin) computer cable and a PC audio
cable.
To use a PC, set the monitor output resolution on the PC
before connecting it to the TV. The following signals can
be displayed:
Format Resolution V. Frequency
VGA 640 × 480 60Hz
SVGA 800 × 600 60Hz
XGA 1024 × 768 60Hz
WXGA 1280 × 768 60Hz
WXGA 1360 × 768 60Hz
Other formats or non-standard signals will not be displayed
correctly.
To display the optimum picture, use the PC setting feature
( “Using the PC settings feature” on page 40).
Note:
The PC audio input terminals on the TV are shared with the
HDMI 1 analog audio input terminals ( page 41).
Some PC models cannot be connected to this TV.
An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
Signal names for mini D-sub 15-pin connector
Pin No.
Signal
name
Pin No.
Signal
name
Pin No.
Signal
name
1 R 6 Ground 11 NC
2 G 7 Ground 12 NC
3 B 8 Ground 13 H-sync
4 NC* 9 NC 14 V-sync
5 NC 10 Ground 15 NC
*
NC=Not connected
If connecting a certain PC model that signal is particular,
the PC signal may not be detected correctly.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the TV, use
an HDMI-to DVI adapter cable and analog audio cables ( PC
IN AUDIO port just shared with DVI signal from HDMI1
port only). If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog cables are
not necessary ( page 17).
The HDMI 1 input can accept and display VGA, SVGA,
XGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), and 1080i
(60Hz) signal formats. For detailed signal specifications, see
page 49.
Note:
The edges of the images may be hidden.
If connecting a certain PC model that signal is particular,
the PC signal may not be detected correctly.
Computer
PC audio
output
PC audio
cable
Conversion adapter
(if necessary)
Computer
PC audio
output
PC audio
cable
20
Preparing the remote control for
use
Your TV remote control can operate your TV and many other
devices such as cable converter boxes, satellite receivers,
VCRs, DVD players, and HTIBs (home theater in a box),
even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most
Toshiba devices ( page 24).
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
You can program the TV remote control so it will operate the
other device (pages 22–26).
Installing the remote control
batteries
Remove the battery cover from the back of the remote
control.
Squeeze tab
and lift cover.
Install two “AAA” size batteries, making sure to match
the + and – signs on the batteries to the signs on the
battery compartment.
Reinsert the battery cover in the remote control until the
tab snaps.
Caution:
Dispose of batteries in a designated disposal area. Never
throw batteries into a fire.
Attention should be drawn to the environmental aspects of
battery disposal.
Never mix battery types or combine used batteries with
new ones.
Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
Note:
Be sure to use AAA size batteries.
Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with the
1
2
3
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
Always remove batteries from the remote control if they
are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
Remote control effective range
For optimum performance, aim the remote control directly
at the TV and make sure there is no obstruction between the
remote control and the TV.
16.4 ft (5m)
Chapter 3: Using the remote control
Point remote control
toward remote sensor
on front of TV.
Chapter 3: Using the remote control
1
Learning about the remote control
The buttons used for operating the TV only are described
here. For a complete list of the remote control’s functions, see
the remote control functional key chart (page 23).
Note: The error message “NOT AVAILABLE” may appear if
you press a key for a function that is not available.
POWER turns the TV on and off. When the TV is on, the
green LED indicator on the TV front will be illuminated.
PIC MODE selects the picture mode ( page 34).
SLEEP accesses the sleep timer ( page 41).
PIC SIZE cycles through the picture sizes: Full,
TheaterWide 1/2/3, Natural( page 33).
Channel Numbers (0–9, –/100) directly tune
channels. The button is used to tune digital channels
( page 32) or to be the numeric key for other function.
INPUT selects the video input source ( page 32).
CH pq cycles through programmed channels ( page
30).
VOL + – adjusts the volume level.
FAV BROWSER accesses the favorites list in the
Favorites Channel Set Menu ( page 32).
RECALL displays TV status information ( page 42).
CH RTN returns to the last viewed channel ( page 32).
MUTE reduces or turns off the sound ( page 36).
INFO displays TV status information as well as program
details, when available ( page 42).
Arrow buttons (pqtu) When a menu is on-screen,
these buttons select or adjust programming menus.
ENTER activates highlighted items in the main menu
system.
MENU accesses the main TV menu system ( page 27).
EXIT closes on-screen menus.
MODE SELECT switch switches between TV,
CABLE/SAT, AUX 1, and AUX 2 modes ( page 22).
Set to “TV” to control the TV.
1�
2�
3�
4�
5�
6�
7�
8�
9�
10�
11�
12�
13�
14�
15�
16�
17�
18�
Chapter 3: Using the remote control

Using the remote control to
control your other devices
If you have a non-Toshiba device or a Toshiba device that the
remote control is not preprogrammed to operate, you must
first program the remote control to recognize the device (if
you have not already done so) (pages 24–26).
To use your TV remote control to operate a:
Cable converter box or satellite receiver, set the MODE
SELECT switch to CABLE/SAT.
VCR, set the MODE SELECT switch to AUX 1.
DVD player or HTIB, set the MODE SELECT switch to
AUX 2.
Note: Even after the TV remote control is programmed, it
may not operate certain features on any other devices. If this
happens and you wish to use those features, you will need to
use the device’s original remote control.
16
17
19
18
Point the remote control
directly at the device.
POWER Turns the selected device on and off.
Channel Numbers (0-9) Press to directly access
channels (as opposed to ) or to be the numeric key
for other function.
+10 Press to directly access DVD chapters higher than 10.
TOP MENU Accesses a DVD’s top menu.
CH pq For channels programmed into the channel
memory (page 30):
p selects the next higher channel.
q selects the next lower channel.
GUIDE Displays the channel guide in the CABLE/SAT
mode.
SET UP Accesses a DVD’s setup menu in the AUX
mode.
INFO Displays TV status information on-screen.
pqtu Press to navigate DVD menus (may not work
on some DVD players).
ENTER Required by some satellite receivers and DVD
players to activate certain functions.
DVD CLEAR Press to reset the title and chapter number.
PLAY Begins playback of a tape or DVD.
PAUSE Press during play or record mode to pause the
picture; press again to restart.
STOP Stops the tape or DVD.
SKIP Skips forward to locate later DVD chapters.
FF Fast-forwards the tape or DVD. (Press during play
mode to view the picture moving rapidly forward.)
SKIP Skips back to beginning of current DVD
chapter, or locates previous chapters.
REW Rewinds/reverses the tape or DVD. (Press during
play mode to view the picture moving rapidly backward.)
TV/VCR To view one program while recording another,
press to select TV mode.
SEARCH selects a specific DVD chapter, title or time.
REC Starts tape recording.
MODE SELECT switch Set to “TV” to control the
TV; “CABLE/SAT” to control a cable converter box or
satellite receiver; “AUX 1” to control a VCR; “AUX 2” to
control a DVD player or HTIB.
1�
2�
3�
4�
5�
6�
7�
8�
9�
10�
11�
12�
13�
14�
15�
16�
17�
18�
19�
20�
Chapter 3: Using the remote control

Remote Control functional key chart
Note:
“---” = key does not send a signal in that remote control mode.
TV” = key will affect the TV, even though the remote control is in another mode.
* Not available for your TV.
REMOTE CONTROL KEY Toshiba TV CABLE SAT (satellite) AUX 1 (VCR) AUX  (DVD or HTIB)
POWER Power Power Power Power Power
SLEEP Sleep timer
TV TV TV TV
PIC SIZE Picture size
TV TV TV TV
PIC MODE PIC MODE
TV TV TV TV
1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9 Digit 1-9
0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0
100/–/+10 – (sub CH) --- – (sub CH) 100 +10
INPUT TV/Video select
TV TV TV TV
FAV BROWSER/
TOP MENU
FAV BROWSER
DVD TOP Menu*
--- --- --- Top Menu
MUTE Sound mute
TV TV TV TV
SET UP/GUIDE Guide* --- SAT Guide --- Setup
VOL + – Volume up/down
TV TV TV TV
CHpq
Channel
up/down
Channel
up/down
Channel
up/down
Channel
up/down
---
RECALL RECALL
TV TV TV TV
CH RTN/DVD RTN
Previous channel
DVD previous menu*
--- --- --- DVD Return
INFO Info --- Info --- Display
ENTER Enter --- Select, Enter --- Enter
pq
Menu up/down ---
Menu
up/down
--- Menu up/down
t
Menu left/
Channel Browser™ *
--- Menu left --- Menu left
u
Menu right/
Channel Browser™ *
--- Menu right --- Menu right
MENU Menu --- Action Menu --- DVD Menu
EXIT/DVD CLEAR
Exit
DVD clear*
--- Exit --- DVD Clear
PAUSE/STEP Pause* --- --- Pause Pause
PLAY Play* --- --- Play Play
STOP Stop* --- --- Stop Stop
SKIP Skip REV* --- --- --- Skip REV
SKIP Skip FWD* --- --- --- Skip FWD
REW Rewind* --- --- Rewind Rewind
FF Fast FWD* --- --- Fast FWD Fast FWD
TV/VCR/
SEARCH
DVD search* --- --- TV/VCR DVD search
REC REC MENU* --- --- Record (2 click) ---
SLOW – SLOW REW* --- --- --- ---
SLOW + SLOW FWD* --- --- --- ---
ANGLE Angle* --- --- --- DVD Angle
SUB TITLE Sub title* --- --- --- DVD Sub title
AUDIO Audio* --- --- --- DVD Audio
EJECT Eject* --- --- --- DVD Eject
Chapter 3: Using the remote control

Programming the remote control
to control your other devices
Your Toshiba TV remote control is preprogrammed to operate
most Toshiba devices. To program your TV remote control to
operate a non-Toshiba device (or a Toshiba device that it is not
preprogrammed to operate), follow the steps below. For details
on using the remote control to operate the device, see page 22.
In the remote control code table (page 25), find the
code for your device. If more than one code is listed, try
each one separately until you find one that works.
Set the MODE SELECT switch to the type of device
you are programming the remote control to operate —
CABLE/SAT (for a cable converter box or satellite
receiver), AUX 1 (for a VCR or TV/VCR combo), or
AUX 2 (for a DVD player or HTIB [home theater in a
box]).
While holding down , press the Channel Number
buttons to enter the 3-digit code for your device.
To test the code, turn on the device, point the remote
control at it, and press . See notes below.
If the correct code was entered, the device will turn
off.
If the device does not respond, repeat steps 1–4 using
another code.
If the device does not respond to another code, you
will need to use the remote control that came with the
device.
Remember to set the MODE SELECT switch back to
“TV” to control the TV.
For future reference, write down the code(s) you used:
DEVICE CODE DEVICE CODE
Note:
In addition to POWER, confirm that all necessary keys on
the TV remote control operate your device. If some keys are
not operational, repeat the device code setup using another
code (if other codes are listed for your device). If, after
trying all listed codes, the necessary keys do not operate
your device, use the device’s original remote control.
Every time you change the batteries, you will need to
reprogram the remote control.
Some newer VCRs respond to either of two codes. These
VCRs have a switch labeled “VCR1/VCR2.” If your VCR has
this kind of switch and does not respond to the codes for
your VCR brand, set the switch to the other position (“VCR1”
or “VCR2”) and reprogram the remote control.
1�
2�
3�
4�
5�
6�
Chapter 3: Using the remote control

Remote control codes
In some cases you may not be able
to operate your device with the TV
remote control. Your other device may
use a code that is not recognized by the
TV remote control. If this happens, use
the device’s remote control.
Cable converter box
ABC 061, 062, 063, 082,
084, 087, 092,
096, 098
Archer 065, 092, 097, 099
Cableview 064, 094
Century 092
Citizen 090, 092, 097
Contec 083, 085, 086, 088,
093, 098
Diamond 093
GE 061, 062
Gemini 069, 070, 094
Hamlin 093
Hitachi 062, 095, 096
Jasco 097
Motorola/GI/Jerrold 062, 069, 071, 082,
086, 089, 096, 107
Magnavox 072, 096
Memorex 092, 104
Multi Canal 090
Novavision 101
Panasonic 081, 083, 085
Philco 087
Philips 066, 067, 068, 070,
072, 073, 074, 075,
092
Pioneer 076, 077
Proscan 061, 062
Radio Shack 092, 097, 099
RCA 064, 081
Realistic 065
Recoton 102
Samsung 077, 090
Scientific Atlanta 063, 078, 079, 080,
088, 098, 101, 105
Sears 095
Signature 062
Signature 2000 096
Sprucer 081, 085
Starcom 069, 082, 087, 096,
103, 104
Stargate 069, 090
Sylvania 095, 100
TeleView 090
Texscan 100
Tocom 071, 084, 085
U. S. Electronics 087, 096, 098
United Cable 082
Universal 065, 092, 097, 099,
102, 103
Wards 096
Satellite receiver
Alphastar 038, 059
Chaparral 034
DISH Network 057
Drake 020, 040, 044, 046,
050, 053
Echostar 018, 041, 051
Express Vu 057
Fujitsu 027
GE 008, 009, 013
General Instruments 010, 011, 012, 022,
023, 031, 049
Hitachi 033
Hughes 033
Hughes Network
Systems 019
Intersat 048
Janeil 027
JVC 017, 057
Kenwood 029
Magnavox 060
Optimus 058
Pansat 036, 052
Primestar 015, 042
Proscan 008, 009, 013
Radio Shack 022, 023, 030
RCA 008, 009, 013, 016
Realistic 030
Samsung 059
Sony 014, 055
Star Choice 057, 106
Star Trak 025, 026, 037, 054
STS 024
Toshiba 000, 001, 002, 003,
004, 005, 006, 007,
020, 031, 056
Uniden 021, 028, 030, 032,
035, 039, 043, 045,
047, 058
Zenith 027
TV/VCR Combo
Action 078
GE 059, 062
Goldstar 065
Panasonic 065
Precision 078
Quasar 065
Realistic 079
Sony 074
Toshiba 057
Zenith 065
Totevision 009, 010, 065
DVD/VCR Combo
Go Video DVD=087,
VCR=081
JVC DVD=088,
VCR=082
RCA DVD=089,
VCR=083
Samsung DVD=090,
VCR=084
Sanyo DVD=091,
VCR=085
Zenith DVD=092,
VCR=086
DVD player
Aiwa 006, 015
Apex 016, 017
BOSE 097
Broksonic 018
Clarion 019
Classic 020
Daewoo 021
Denon 022, 023, 024, 025
Emerson 026, 027
Fisher 028
Funai 027
GE 001, 029, 030
Go Video 087
GPX 031
Hitachi 005, 032, 033, 034,
035
JVC 003, 007, 036, 042,
088
Kenwood 037
Konka 008, 009
Magnavox 004, 038
Memorex 039
Mintek 040
NAD 026
Nakamichi 041
Norcent 043
Onkyo 044
Oritron 058
Panasonic 010, 045, 046, 047,
048, 049, 050
Philips 004, 051
Pioneer 052, 053, 054, 055
Proscan 001, 056
Qwestar 057, 058
RCA 001, 002, 059, 089
Sampo 060
Samsung 061, 062, 086, 090
Sansui 073
Sanyo 063, 091
Sharp 064, 067
Sherwood 074
Sony 011, 012, 065, 066,
068, 069, 070
Sylvania 027
Teac 071
Technics 072
Techwood 075
Toshiba 000, 013, 076, 077,
078
Yamaha 079, 080, 081
Zenith 014, 082, 092
Portable DVD player
Aiwa 093
Audiovox 094, 095
Panasonic 024, 096, 099
RCA 098
VCR
Admiral 049
Aiko 019
Aiwa 018
Akai 003, 004, 037, 038,
039, 058, 069
Audiovox 010
Bell & Howell 007, 068
Broksonic 008, 017
Calix 010
Carver 026
CCE 019
Citizen 009, 010, 011, 012,
013, 014, 015, 019,
057, 073
Colortyme 005
(continued)
Chapter 3: Using the remote control
6
Craig 009, 010, 016, 061,
065, 079
Curtis Mathes 001, 005, 009, 012,
014, 040, 048, 053,
056, 057
Daewoo 011, 013, 015, 017,
018, 019, 057, 078
Daytron 078
Denon 063
Dimensia 001, 048
Electrohome 010, 020, 065
Emerson 003, 008, 010, 011,
017, 018, 020, 028,
039, 054, 057, 062,
065, 068, 072
Fisher 007, 016, 021, 022,
023, 057, 064, 068,
070, 071, 079
Fuji 004, 041
Funai 018, 073
Garrard 018
GE 001, 002, 009, 040,
042, 048, 056
Go Video 056, 059, 061, 081
Goldstar 005, 010, 014, 054,
056, 065, 067
Gradiente 018, 065
Harman Kardon 005
Hitachi 024, 025, 035, 037,
042, 063, 070, 080
JBL 076
JC Penney 005, 006, 007, 008,
009, 010, 023, 024,
025, 026, 035, 056,
061, 063, 065
Jensen 024, 025, 037, 050
JVC 005, 006, 007, 014,
037, 043, 055, 062,
063, 068, 082
Kenwood 005, 006, 007, 012,
014, 037, 043, 050,
053, 068, 071
Kodak 010
LG 010
Lloyds 053, 073, 079
Logik 061
LXI 010
Magnasonic 061, 065, 078
Magnavox 026, 027, 034, 044,
057, 061, 072
Marantz 005, 006, 007, 012,
014, 026, 053, 067
Memorex 007, 009, 010, 016,
018, 034, 049, 063,
065, 066, 068, 075,
079
MGA 020, 028, 039
MGN 056
Minolta 024, 025, 035, 063
Mitsubishi 020, 024, 025, 028,
039, 043, 065
Montgomery Ward 049
Motorola 049
MTC 009, 046, 061
Multitech 009, 012, 018
NEC 005, 006, 007, 012,
014, 037, 043, 053,
054, 067, 070
Nikko 010
Noblex 009
Optimus 010, 049, 065
Optonica 031
Orion 054, 057, 062, 065,
068, 072
Panasonic 036, 045, 046, 057,
061, 072, 079
Pentax 012, 024, 025, 035,
042, 053, 063
Pentex Research 014
Philco 026, 027, 063
Philips 026, 031, 044, 057
Pioneer 006, 024, 043, 055
Portland 012, 013, 015
Proscan 001, 002, 048
Proton 061
Quasar 045
Radio Shack 010, 031, 065
Radio Shack/Realistic 007, 009, 010, 016,
018, 020, 021, 022,
031, 049
Radix 010
RCA 001, 002, 003, 009,
024, 025, 029, 035,
040, 042, 045, 048,
055, 056, 063, 071,
083
Realistic 007, 009, 010, 011,
016, 018, 020, 021,
022, 031, 049, 051,
056, 060, 065, 075,
079
Ricoh 047
Runco 034
Samsung 009, 011, 038, 056,
073, 084
Sansui 006, 037, 043, 061
Sanyo 007, 009, 016, 054,
064, 068, 071, 075,
079, 085
Scott 008, 011, 017, 028,
030, 057, 065, 072
Sears 007, 010, 016, 021,
022, 023, 024, 025,
035, 053, 057, 063,
064, 065, 068, 071,
075, 079
Sharp 013, 020, 031, 049,
051, 060, 066
Shintom 004, 025, 032, 061
Signature 049
Signature 2000 075
Singer 047, 061
Sony 004, 032, 033, 041,
052, 058, 070, 074,
076, 077, 080
STS 035
Sylvania 018, 026, 027, 028,
044, 072
Symphonic 018, 050, 051, 053,
073, 079
Tandy 007
Tashiko 010
Tatung 037
Teac 018, 029, 037
Technics 036
Teknika 010, 018, 065
Toshiba 000, 011, 021, 023,
024, 028, 030, 039,
057, 074, 078, 079
Totevision 009, 010, 065
Unitec 073
Unitech 009
Vector Research 005, 006, 011, 012,
053
Video Concepts 005, 006, 011, 012,
039, 053
Wards 009, 010, 011, 016,
018, 020, 024, 025,
031, 035, 049, 051,
056, 057, 060, 065,
066, 079
White Westinghouse 073
XR-1000 018
Yamaha 005, 006, 007, 014,
037, 053
Zenith 004, 032, 034, 041,
047, 069, 086
HTIB
Lasonic 083
Panasonic 084
Venturer 085
7
Main menu layout
The tables below and on the next page provide a quick overview of your TV’s menu system.
To open the main menus (illustrated below), press on the remote control or TV control panel.
Icon Item Option Page
Input Configuration
Antenna / Cable
29
DTV Signal Meter
[Opens the DTV Signal Meter menu]
29
Auto Ch Search
[Opens the Auto Ch Search menu]
30
Add On Ch Search
[Opens the Add On Ch Search]
30
Manual Ch Set
[Set Ch Viewable or Not Viewable]
31
Channel Labels
[Opens the Channel Labels]
31
Menu Language
English / Français / Español
29
System Status
[Opens the System Information menu]
29
Mode
Sports/Standard/Movie/Preference
34
Contrast
0-100
35
Brightness
0-100
35
Color
0-100
35
Tint
-50~+50
35
Sharpness
0-20
35
Settings
Reset
35
Advanced Picture
[Opens the Advanced Picture menu]
33,43,44,45
Language
English / Français / Español
37
Bass
0-20
37
Treble
0-20
37
Balance
L50~R50
37
Optical Output Format
Dolby Digital / PCM
18,38
Speakers
On / Off
18
MTS
Stereo/ SAP/ Mono
36,37
Settings
Reset
38
Time Zone
[Pacific / Alaska / Hawaii / Eastern / Central / Mountain]
42
Sleep Timer
Off / 30 / 60 / 90mins
41
PC Settings
[Opens the PC Settings menu]
40
Parental Control
[Opens the Parental Control menu]
38,39,40
Digital CC Settings
[Opens the Digital CC Settings menu]
36
Digital CC
Off/CS1/CS2/CS3/CS4/CS5/CS6
36
Analog CC
Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4
35,36
Function items maybe have some difference depend on different video input source.
*
Chapter 4: Menu layout and navigation
Chapter 4: Menu layout and navigation
8
If the HDMI signal is DVI format, the
Mode
,
Color
,
Tint
and
Sharpness
will be inactive (= No).
Navigating the menu system
You can use the buttons on the remote control or TV control
panel to access and navigate your TV’s on-screen menu
system.
Press to open the menu system.
When a menu is open, use the up/down/left/right arrow
buttons (pqtu) on the remote control or TV control
panel to move in the corresponding direction in the menu.
Press to save your menu settings or select a highlighted
item. (A highlighted menu item appears in a different color
in the menu.)
All menus close automatically if you do not make a
selection within 60 seconds, except the DTV Signal Meter
*
menu, which doesn’t close automatically.
To close a menu instantly, press .
** (Active = Yes, Inactive = No)
Icon Item ANT Video ColorStream HD HDMI PC
Input Configuration
Yes No No No No
DTV Signal Meter
Yes No No No No
Auto Ch Search
Yes No No No No
Add On Ch Search
Yes No No No No
Manual Ch Set
Yes No No No No
Channel Labels
Yes No No No No
Menu Language
Yes Yes Yes Yes Yes
System Status
Yes Yes Yes Yes Yes
Mode
Yes Yes Yes Yes* No
Contrast
Yes Yes Yes Yes Yes
Brightness
Yes Yes Yes Yes Yes
Color
Yes Yes Yes Yes* No
Tint
Yes Yes Yes Yes* No
Sharpness
Yes Yes Yes Yes* No
Settings
Yes Yes Yes Yes Yes
Advanced Picture
Yes Yes Yes Yes Yes
Language
Yes No No No No
Bass
Yes Yes Yes Yes Yes
Treble
Yes Yes Yes Yes Yes
Balance
Yes Yes Yes Yes Yes
Optical Output Format
Yes No No No No
Speakers
Yes Yes Yes Yes Yes
MTS
Yes No No No No
Settings
Yes Yes Yes Yes Yes
Time Zone
Yes No No No No
Sleep Timer
Yes Yes Yes Yes Yes
PC Settings
No No No No Yes
Parental Control
Yes Yes No No No
Digital CC Settings
Yes No No No No
Digital CC
Yes No No No No
Analog CC
Yes Yes No No No
9
Selecting the menu language
You can choose from three different languages (English,
French and Spanish) for the on-screen display of menus and
messages.
To select the menu language:
Press and open the Setup menu.
Highlight Menu Language.
Press u or to select your preferred menu language.
Press to close the Setup menu.
Conguring the antenna input
source for the ANT/CABLE terminal
To configure the ANT input source:
Press and open the Setup menu.
Highlight Input Configuration.
Press u or to select the input source (Cable or
Antenna) which input signal connecting to ANT/
CABLE terminal on the TV.
1�
2�
3�
4�
1�
2�
3�
Viewing the digital signal meter
You can view the digital signal meter in the ANT digital TV
input source only.
To view the digital signal meter:
Press and open the Setup menu.
Highlight DTV Signal Meter.
Press u or , a new set of DTV Signal Meter menu
icons will appear as shown below.
Viewing the system status
To view the system status:
Press and open the Setup menu.
Highlight System Status.
Press u or , the System Information menu will
appear as below.
1�
2�
3�
1�
2�
3�
Chapter 5: Setting up your TV
Chapter 5: Setting up your TV
0
Programming channels into the
TVs channel memory
When you press or on the remote control or TV
control panel, your TV will stop only on the channels you
programmed into the TV’s channel memory.
Follow the steps below to program channels into the TV’s
channel memory.
Programming channels automatically
Your TV can automatically detect all active channels in your
area and store them in its memory. After the channels are
programmed automatically, you can manually add or erase
individual channels in the channel memory.
Note:
You must configure the antenna input source before
programming channels ( page 29).
The automatic channel programming process erases
channels that were previously programmed into the TV’s
memory.
To tune the TV to a channel not programmed in the channel
memory, you must use the Channel Number buttons on the
remote control.
Programming channels when the antenna input is
configured for Cable will take substantially longer than
when the antenna input is configured for Antenna. This is
normal; however, once channel programming is finished,
you should not have to repeat the programming process
again unless your Cable TV service lineup changes
significantly.
To program channels automatically:
Configure the antenna input source, if you have not
already done so (page 29).
Press and open the Setup menu.
Highlight Auto Ch Search.
Press u or to begin channel programming (A new set
of Auto Ch Search menu icons will appear as shown
below.)
1�
2�
3�
4�
The TV will automatically cycle through all the antenna
channels, and store all active channels in the channel
memory. While the TV is cycling through the channels,
the message “Progress(%)” appears a white bar to
indicate the scanning status (as shown above).
To cancel channel programming, press on the remote
control.
When channel programming is finished, press or to
view the programmed channels.
Manually adding channels in the channel
memory
Auto Ch Search can search and save channel information
into the channel memory.
There are two ways to add channel information into the
channel memory if the program are not exist in Channel
memory previously:
(1)To add On Ch Search:
Press and open the Setup menu.
Highlight Add On Ch Search.
Press u or to begin channel programming (A new set
of Add On Ch Search menu icons will appear as below.)
(2)Manually to add channel on a physical channel
For analog Channel:
Use the Channel Numbers to enter the channel number
that you want to add directly. (digital CH may use the
Dash on the remote control, for example,56-1 )
Press or on the remote control to save this adding
channel to Channel memory.
5�
1�
2�
3�
1�
2�
Chapter 5: Setting up your TV
1
Manually deleting channels in the channel
memory
There is no method really to delete the channel memory
except executing Auto Ch Search with a empty RF input. But
there is a simple way to disable undesired Channel.
Press and open the Setup menu
Highlight Manual Ch Set.
Press u or , a new set of Manual Channel Set
Menu will appear as below.
Press pq buttons to highlight the channel.
Press to cycle select Channel is Viewable or Not
Viewable.
*
If the Channel is marked to
"Not Viewable"
. The channel will
be skip when you press "
" or "
", unless you set it to
"Viewable"
or press Channel Number directly.
Channel memory checking table
All the channel search result can be seen on the Manual Ch
Set.
Press and open the Setup menu
Highlight Manual Ch Set. and adding or deleting
channel memory. Please refer above description.
1�
2�
3�
4�
5�
1�
2�
Channel Labels Menu
A list of common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the Channel
Labels window. If the desired channel label is not provided in
the list, you will be able to manually enter/edit labels using
the arrow buttons.
Press and open the Setup menu
Highlight Channel Labels.
Press u or , Channel Labels Menu will appear as
below.
Left block is original channel No, right block is new
channel label. Arrow buttons can edit it (maximum 7
character are available).
Press to save your setting. And you can see the new
Channel Label on top-left of the screen or press button
on the remote control to show channel information.
1�
2�
3�
4�
5�
32
Selecting the video input source
to view
To select the video input source to view:
Press on the remote control or TV control panel.
And then either:
a) Press numeric key 0~7 directly; or
b) Repeatedly press  on the remote control and then
press to change the input; or
c) Repeatedly press on the remote control or TV
control panel to change the input.
Note:
“No Signal” will appear randomly on the screen if no signal
is received in video input mode.
Tuning channel
Favorites Browser
The Favorites Browser allows you to quickly set up a favorite
channels list and let you jump to prefer channel easily (Highlight
Channel number then press ).
To add a favorite channel:
Tune to the channel number that you prefer.
Press button, a new set of Favorite Channel
Set Menu will appear as below.
1�
2�
1�
2�
Press button to add the current display channel to
favorite browser list.
To delete a favorite channel:
Press button to open the favorites channel set
menu.
Press  buttons to highlight the channel then press
button to delete it.
Tuning to the next programmed channel
To tune to the next programmed channel:
Press or on the remote control or TV control panel.
Note: This feature will not work unless you program channels
into the TV’s channel memory ( page 30).
Tuning to a specic channel (programmed
or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5, then .
Tuning digital channels:
Press the Channel Number (0–9) on the remote control,
followed by the dash ( ) button and then the sub-channel
number. For example, to select digital channel 125-1, press 1,
2, 5, –, 1, then .
Note: If a digital channel is not programmed—either through
the automatic channel scan ( page 30) or the channel
add/delete function ( page 30)—you will have to tune the
RF channel using the Channel Number and dash ( ) on the
remote control.
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
Select the first channel you want to view.
Select a second channel using the Channel Number
buttons (and the dash ( ) button if selecting a digital
channel).
Press on the remote control. The previous channel
will display. Each time you press , the TV will switch
back and forth between the last two channels that were
tuned.
3�
1�
2�
1�
2�
3�
Chapter 6: Using the TV’s features
Chapter 6: Using the TV’s features
33
Selecting the picture size
You can view many program formats in a variety of
picture sizes—Full, TheaterWide 1, TheaterWide 2,
TheaterWide 3 and Natural.
Note: The “picture size” illustrations are examples only. The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.
You can save separate picture size preferences for each input
on your TV.
To select the picture size using the remote control:
Repeatedly press , picture size will change cyclically as
below.
FullTheaterWide 1 TheaterWide 2 TheaterWide 3
NaturalFull
To select the picture size using the menu system:
Press and open the Video menu.
Highlight Advanced Picture.
Press or , a new set of Advanced Picture menu
icons will appear as below.
Press  buttons to highlight Picture Size.
Press or , picture mode is changed cyclically.
FullTheaterWide 1 TheaterWide 2 TheaterWide 3
NaturalFull
Note: RGB timing only support Natural and Full, no matter the
RGB timing is via D-SUB to PC IN or via DVI to HDMI 1.
Using these functions to change the picture size (i.e.,
changing the height/ width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
1�
2�
3�
4�
5�
Note: If you select one of the TheaterWide
®
picture sizes, the
top and bottom edges of the picture (including subtitles or
captions) may be hidden.
Natural picture size
The image is displayed close to its originally formatted
proportion. Some program formats will display with
sidebars and/or bars at the top and bottom.
Natural picture size example
TheaterWide 1 picture size (for 4:3 format programs)
The center of the picture remains close to its original
proportion, but the left and right edges are stretched wider
to fill the screen.
TheaterWide 1 picture size example
TheaterWide 2 picture size (for letter box programs)
The picture is stretched wider to fill the width of the screen,
but only slightly stretched taller.
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
TheaterWide 2 picture size example
Chapter 6: Using the TV’s features
34
TheaterWide 3 picture size (for letter box programs
with subtitles)
The picture is stretched wider to fill the width of the screen,
but only slightly stretched taller.
TheaterWide 3 picture size example
Full picture size (for 16:9 [480i, 480p] source
programs only)
If receiving a squeezed 4:3 format program, the picture
is stretched wider to fill the width of the screen, but not
stretched taller.
None of the picture is hidden.
Full picture size example
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from four different
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Movie
Lower contrast for darkened room (factory
setting)
Preference Your personal preferences
To select the picture mode:
Repeatedly press , picture mode will change cyclically
as below:
SportsStandardMoviePreferenceSports.
To select the picture mode using the menu system:
Press and open the Video menu.
Highlight Mode.
Press or , picture mode is changed cyclically.
SportsStandardMoviePreferenceSports
Note: The picture mode you select affects the current
input only. You can select a different picture mode for each
input.
1�
2�
3�
Chapter 6: Using the TV’s features
35
Adjusting the picture quality
You can adjust the picture quality (Contrast, Brightness,
Color, Tint, Sharpness, Dynamic Contrast, Backlight and
DynaLight™) to your personal preferences.
Selection Adjusted Range Effect
Contrast 0~100 lower~higher
Brightness 0~100 darker~lighter
Color 0~100 paler~deeper
Tint -50~+50 reddish~greenish
Sharpness 0~20 softer~sharper
Dynamic Contrast On / Off N/A
Backlight 0~10 darker~lighter
DynaLight* On / Off N/A
DynaLight™
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
To adjust the picture quality:
Press
and open the
Video
menu
.
Highlight each item you want to adjust (Dynamic
Contrast
,
Backlight
and
DynaLight
are under
Advance Picture
item.)
Press , a new adjustment bar will appear.
Press or to adjust the setting value.
Press to save and back to previous menu icon, or press
to save and quit system menu.
Dynamic Contrast and DynaLight only toggle press or
to set On/Off.
*
1�
2�
3�
4�
5�
Reset Factory Defaults of Video
To reset all image quality of Video to their factory
default values:
Press and open the Video menu.
Highlight Settings.
Press or , Video
settings will recover to factory
default values.
Using the closed caption mode
Base closed captions
The closed caption mode has two options:
Captions—An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are closed
captioned (usually marked “CC” in program guides).
Text—An on-screen display of information not related to
the current program, such as weather or stock data (when
provided by individual stations).
To view Analog captions or text:
Press and open the Prefer
menu
.
Highlight Analog CC.
Press or cyclically to select CC type that you want.
OffCC1CC2CC3CC4T1T2T3T4Off
Note: When colorstream input is used, the analog CC
setting defaults to Video.
To view captions:
Highlight CC1, CC2, CC3, or CC4. (CC1 displays
translation of the primary language in your area.)
Note: If the program or video you selected is not closed
captioned, no captions will display on-screen.
1�
2�
3�
1�
2�
3�
Chapter 6: Using the TV’s features
36
To view text:
Highlight T1, T2, T3, or T4.
Note: If text is not available in your area, a black rectangle
may appear on screen. If this happens, set the Analog CC
Mode to OFF.
To view Digital captions:
Press and open the Prefer
menu
.
Highlight Digital CC.
Press or cyclically to select CC type that you want.
OffCS1CS2CS3CS4CS5CS6Off
Note: A Closed caption signal may not display in the
following situations:
This feature is available for digital channels only.
When a videotape has been dubbed.
When the signal reception is weak.
When the signal reception is non-standard.
Digital CC Settings
You can customize the closed caption display characteristics
by changing the background color, opacity, text size, type,
edge, and color.
Note:
This feature is available for digital channels only.
You cannot set the Caption Text and Background as the
same color.
To customize the closed captions:
Press and open the Prefer
menu
.
Highlight Digital CC Settings.
Press or , a new set of Digital Closed Caption menu
icons will appear as below.
1�
2�
3�
1�
2�
3�
Style item default setting is Automatic, and you can
adjust it by yourself. (Press or to set Style item
to Custom)
Press  buttons then press or cyclically to
select prefer status (refer below table). And there is a
preview area on screen for you reference.
Caption Size Automatic, Small, Standard, Large
Caption Text
Type
Automatic, Default, Mono w. Serif, Prop.
w. Serif, Mono w/o Serif, Prop. w/o
Serif, Casual, Cursive, Small Capitals
Caption Text
Edge
Automatic, None, Raised, Depressed,
Uniform, Left Drop Shadow, Right Drop
Shadow
Caption Text
Color
Automatic, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Foreground
Opacity
Automatic, Transparent, Translucent,
Solid, Flashing
Background
Color
Automatic, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Background
Opacity
Automatic, Transparent, Translucent,
Solid, Flashing
Caption Text
Edge Color
Automatic, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Adjusting the audio
Muting the sound
Press to partially reduce (1/2 MUTE) or turn off (MUTE)
the sound. Each time you press , the mute mode will change
in the following order:
Mute Volume1/2 Mute
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
“Stereo” or “SAP” appears on-screen when is pressed.
The MTS feature is not available when the TV is in VIDEO
mode.
4�
5�
Preview
window
Chapter 6: Using the TV’s features
37
To listen to stereo sound:
Press and open the Audio
menu
.
Highlight MTS.
Press or to select Stereo, SAP and Mono.
Stereo
SAP
Mono
Stereo
Stereo
Note:
You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
A second audio program (SAP) can be heard only on
those TV stations that offer it. For example, a station might
broadcast another language as a second audio program.
If you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
If you have SAP on and the station you are watching is
not broadcasting a second audio program, the station’s
normal audio will be output. However, occasionally there is
no sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
To listen to an alternate language on an ATSC digital
station (if available):
Press and open the Audio
menu
.
Highlight Language.
Press or to select English, Français and Español.
EnglishFrançaisEspañolEnglish
Stereo
1�
2�
3�
1�
2�
3�
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
Press and open the Audio menu.
Highlight the item you want to adjust (Bass, Treble, or
Balance).
Press , a new adjustment bar will appear as below.
Press or to adjust the level.
makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
Press to save and back to previous menu icon, or
Press to save and quit system menu.
1�
2�
3�
4�
5�
Chapter 6: Using the TV’s features
38
Reset Factory Defaults of Audio
To reset all tone quality of Audio to their factory
default values:
Press and open the Audio menu.
Highlight Settings.
Press or , all Audio settings will recover to factory
default values.
Selecting the optical output format
You can use this feature to select the optical output format
when you connect a Dolby Digital decoder or other digital
audio system to the DIGITAL AUDIO OUT terminal on the
TV (see “Connecting a digital audio system” on page 18).
To select the optical output format:
Press and open the Audio
menu
.
Highlight Optical Output Format.
Press or cyclically to select either Dolby Digital
or PCM, depending on your device.
Stereo
Press to save and quick system menu.
1�
2�
3�
1�
2�
3�
4�
Using the Parental Control menu
The Parental Control menu includes US Ratings, Canadian
Rating , Advanced Rating, Advanced Parental Lock and
New PIN Code . You can use these features after entering the
correct PIN code.
Entering the PIN code
Press and open the Prefer
menu
.
Highlight Parental Control.
Press or to displays the PIN code entry screen.
Using the numeric key to key in password. (Default
password is 0000)
If the wrong PIN code is entered, the message
“Password Error,Retry:” appears. Enter the code again.
When the correct PIN code is entered, the Parental
Control Menu opens.
1�
2�
3�
Chapter 6: Using the TV’s features
39
Changing your PIN code
There is available to change PIN code.
Press correct PIN code as above to open the Parental
Control Menu.
Highlight New PIN Code.
Press or , A new menu icon will displays as below.
Using the numeric key to press the New Password of
four-digit PIN code, then key in new password again to
confirm. A successful message will appear.
If you still cannot remember your PIN code
While the PIN code entering screen is displayed, press
four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
1�
2�
3�
4�
Blocking TV programs and movies
by rating (V-Chip)
Some TV programs and movies include signals that classify
the content of the program (violence, sex, dialog, language).
The V-Chip feature in this TV detects the signals and blocks
the programs according to the ratings you select. (For rating
descriptions, see the tables on the next page).
To block and unblock TV programs and movies:
Press correct PIN code as above to open the Parental
Control Menu.
Press  buttons to highlight US Ratings.
Press or , A new menu icon "Parental Control
Menu" will appear.
Press  buttons and to select the level of
blocking you prefer. A box with an “ ” is a rating that
will be blocked.
*
If you place an"
" in the box
"None" Rated
,
program rated
"None"
will be blocked; however, programs that do not provide
any rating information will not be blocked.
**
Right side are two default blocked setting that named
"Children"
&
"Youth"
for you to choose directly, the default rating as below.
1�
2�
3�
4�
Chapter 6: Using the TV’s features
40
Independent rating system for broadcasters
Ratings Description and Content themes
TV-MA
Mature Audience Only (This program is specifically
designed to be viewed by adults and therefore
may be unsuitable for children under 17.)
L
) Crude or indecent language
S
) Explicit sexual
activity
V
) Graphic violence
TV-14
Parents Strongly Cautioned (This program contains
some material that many parents would find
unsuitable for children under 14 years of age.)
D
) Intensely suggestive dialog
L
) Strong, coarse
language
S
) Intense sexual situations
V
) Intense
violence
TV-PG
Parental Guidance Suggested (This program
contains material parents may find unsuitable for
younger children.)
D
) Some suggestive dialog
L
) Infrequent coarse
language
S
) Some sexual situations
V
)Moderate
violence
TV-G
General Audience (Most parents would find this
program suitable for all ages.)
TV-Y7
Directed to Older Children (This program is
designed for children age 7 and above.
TV-Y
All Children (This program is designed to be
appropriate for all children.)
Independent rating system for movies
Ratings Description and Content themes
X
X-rated (For adults only)
NC-17
Not intended for anyone 17 and under
R
Restricted (Under 17 requires accompanying
parent or adult)
PG-13
Parents Strongly Cautioned (Some material may be
inappropriate for children under 13)
PG
Parental Guidance Suggested (Some material may
not be suitable for children)
G
General Audience (Appropriate for all ages)
Note:
”Canadian Ratings” is for Canada area (if available),
operation is same as “US Ratings”.
If “RRT5 ” is available on your program provider. You can
set “Advanced Rating” to On, and get a item “Advanced
Parental Lock”. Press or , a new menu icon will appear
and you can follow menu instruction to set up ratings.
Using the PC settings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut off, readjust the H-Position
and V-Position. If the picture is affected by interference,
readjust the Clock and Phase.
To adjust the PC settings:
Repeatedly press to select PC input mode
( “Selecting the video input source to view” page 32).
Press and open the Prefer menu.
Highlight PC Settings menu.
Note: If a PC is not connected or there is no pc input
signal, this feature will be grayed out in the Prefer menu.
Press or , a new set of PC Settings menu icon will
displays as below.
Press or to highlight the item you want to adjust.
Press , a new adjustment bar will appear as below.
Press or to make the appropriate adjustments.
Note: The screen is disrupted momentarily when adjusting
the PC settings. This is not a sign of malfunction.
To execute
"Auto Adjust"
is recommend when you input a
PC timing every time. The image will be auto adjusting by
system internally to get an optimum H/V-Position, Clock and
Phase.
1�
2�
3�
4�
5�
6�
Chapter 6: Using the TV’s features
41
H-Position:
Moves the picture left/right.
The adjustment range is -50~+50 (default value is 0).*
V-Position:
Moves the picture up/down.
The adjustment range is -10~+10 (default value is 0).*
Clock:
Helps to reduce noise and sharpen the picture.
The adjustment range is -10~+10 (default value is 0).*
Phase:
Helps to reduce noise and minimize periodic vertical
stripes on the screen.
The adjustment range is -15~+16 (default value is 0).*
The default settings may vary depending on the input signal
format.
Setting the PC Audio
If the INPUT source is set to PC. The PC IN audio phone jack
is applied for PC IN when PC IN terminal is connecting with
an analog RGB cable. ( page 19)
Note: Because the PC Audio input is shared with HDMI 1.
If INPUT source is set to HDMI 1,”And the HDMI 1 signal
is DVI format. This PC Audio input will apply for HDMI 1.
(Also see item 2 on page 11.)
*
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set
length of time (maximum of 90 minutes).
To set the sleep timer using the remote control:
Press on the remote control to set the length of time until
the TV turns off. Repeatedly press to increase the time in
30-minute increments, to a maximum of 90 minutes.
To set the sleep timer using the on-screen menus:
Press and open the Prefer menu.
Highlight Sleep Timer.
Press or to increase the time in 30-minute
increments.
Off30 Min60 Min90 MinOff
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep timer:
Press on the remote control or same as above process
using the on-screen menus.
To cancel the sleep timer:
Repeatedly press until it is set to Off.
1�
2�
3�
Chapter 6: Using the TV’s features
42
Setting the time zone
To set the time zone:
Press and open the Prefer menu.
Highlight Time Zone.
Press or to select Pacific, Alaska, Hawaii, Eastern,
Central and Mountain.
Pacific
Alaska
Hawaii
Eastern
Central
Mountain
Pacific
Note: After you change the Time Zone setting, when you
press , you will see that the program duration has been
changed. For more details on , see" To display TV
status information using INFO" section on this page.
Displaying TV status information
To display TV status information using RECALL:
Press on the remote control.
The following information will display (if applicable):
Current input (Video 1, Video 2, etc.)
Channel number (if in ANT mode)
Channel label (if set)
Digital signal strength indicator (bar graph in top right
corner of box)
Stereo or SAP audio status
Video resolution
Aspect ratio of incoming video signal (4:3 or 16:9)
V-Chip rating status
To close the RECALL screen:
Press on the remote control.
1�
2�
3�
To display TV status information using INFO:
Press on the remote control.
The following additional information will display for off air
digital channels (if applicable):
Title
Duration
Detailed description
To close the Information screen:
Press on the remote control.
Understanding the auto power off
feature
The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT mode only.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the
TV when the power is resupplied.
Note: You should unplug the TV’s power cord if it is possible
that you will be away from the TV for an extended period of
time after the power is restored.
43
Using the advanced picture
settings features
Using Dynamic Contrast
When dynamic contrast is set to ON, the TV will detect
changes in the picture quality that affect the appearance of
your contrast settings and then automatically adjust the video.
To select dynamic contrast preferences:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight Dynamic Contrast item, and press u or
to select On or Off.
1�
2�
3�
Using DynaLight™
When DynaLight™ is set to ON, the TV will detect changes
in the picture quality that affect the appearance of your
backlight settings and then automatically adjust the video.
To select DynaLight:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight DynaLight and press u or to select On or
Off.
Backlight Adjustment
There is a function to let you to adjust the Backlight.
To select Backlight adjustment:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight Backlight and press , a new adjustment bar
will appear as below.
Press or u to adjust the setting value.
Press to save and back to previous menu icon, or
press to save and quit system menu.
To ExitTo Move
Advanced Picture
CableClear
MPEG Noise Reduction
Color Temperature
Low
Off
Off
Auto Aspect Ratio
Off
Warm
Color Temperature
2
Off
TheaterWide1
DynaLight
Backlight
Dynamic Contrast
Picture Size
Off
Settings
Static Gamma
Reset
On
0
Low
To Change
ENTER
EXIT
Note: If you want to adjust the Backlight item, the
DynaLight item should be set to Off, otherwise the
Backlight item will be grayed out in the Advanced Picture
menu.
1�
2�
3�
1�
2�
3�
4�
5�
Chapter 7: Using the TV’s advanced features
Chapter 7: Using the TV’s advanced features

Using the static gamma feature
The static gamma feature allows you to adjust the levels of
black in the picture.
To adjust the static gamma settings:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight Static Gamma and press , a new
adjustment bar will appear as below.
In the Static Gamma field, press t or u to adjust the
static gamma.
The adjustment range is within ±5 from center.
If the setting is moved in the minus direction, the detail
of black colors will be decreased.
If the setting is moved in the plus direction, the detail of
black colors will be increased.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.
1�
2�
3�
4�
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
A 480i signal from the VIDEO 1, VIDEO 2 input.
A 480i, 480p, 720p, 1080i signal from the HDMI input.
Aspect ratio of
signal source
Automatic aspect size (automatically
selected when Auto Aspect is On)
4:3 normal Natural (with sidebars)
16:9 full Full
Not defined
(no ID-1 data
or HDMI
aspect data)
The current picture size you set under
“Selecting the picture size” on page 33.
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
To turn on the auto aspect ratio feature:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight Auto Aspect Ratio and press u or to
select On or Off.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
1�
2�
3�
Chapter 7: Using the TV’s advanced features

Selecting the color temperature
You can change the quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm),
as described below.
Mode Picture Quality
Cool blueish
Medium neutral
Warm reddish
To select the color temperature:
Press and open the Video menu
Highlight Advanced Picture and press u or .
Highlight Color Temperature and press u or
cyclically to select the mode you prefer (Cool, Medium,
or Warm).
Using MPEG Noise Reduction
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
To select the MPEG Noise Reduction level:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight MPEG Noise Reduction and press u or
cyclically to select the mode you prefer (Off, Low,
Middle and High)
OffLowMiddleHighOff
1�
2�
3�
1�
2�
3�
Using CableClear
®
digital noise reduction
The CableClear
®
digital noise reduction feature allows you
to reduce visible interference in your TV picture. This may
be useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
Press and open the Video menu.
Highlight Advanced Picture and press u or .
Highlight CableClear and press u or ,
cyclically to select the mode you prefer (Off, Low,
Middle and High)
OffLowMiddleHighOff
Note:
If the current input is ANT, VIDEO 1, or VIDEO 2, the
menu will display the text “CableClear.” The available
selections are Off, Low, Middle, and High.
If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1* or HDMI 2*, the menu will display the
text “DNR.” The available selections are Off, Low,
Middle, and High.The Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
The HDMI 1 or HDMI 2 input can accept and display DVI signal
formats: (VGA, SVGA,XGA, WXGA) and Video signal formats: [480i
(60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz)]. But if the input
signal is in DVI signal format, the DNR feature will be grayed out
in the
Advanced Picture Menu
. For detailed signal specifications,
see page 49.
For
ANT, VIDEO 1, or VIDEO 2
For ColorStream HD1, ColorStream HD2, HDMI 1,or HDMI 2.
1�
2�
3�
*
General troubleshooting
Before calling a service technician, please check this chapter
for a possible cause of the problem and some solutions you
can try.
Black box on-screen
The closed caption feature is set to one of the Text modes
(
T1
,
T2
,
T3
, or
T4
). Set the closed caption feature to
Off
(
page 35,36).
Other problems
If your TV’s problem is not addressed in this
Troubleshooting section or the recommended solution
has not worked, please unplug the AC power cord at
least 5 second then plug power cord again to restart the
TV.
TV will not turn on
Make sure the power cord is plugged in, and then press
.
The remote control batteries may be dead. Replace the
batteries or try the control panel buttons.
Picture problems
General picture problems
Check the antenna/cable connections (
Chapter 2).
Press on the remote control or TV and select a
valid video input source (
page 32). If no device is
connected to a particular input on the TV, no picture will
display when you select that particular input source. For
device connection details (
Chapter 2).
Antenna reception may be poor. Use a highly directional
outdoor antenna (if applicable).
The station may have broadcast difficulties. Try another
channel.
Adjust the picture qualities (
page 35).
If you are using a VCR, make sure on the remote
control is set correctly (
page 22).
Do not connect both a standard video cable and an
S-video cable to the
VIDEO 1
input at the same time.
Noisy picture
If you are watching an analog channel (off-air broadcast
or Cable TV), you can set the
CableClear
®
feature to
reduce visible interference in the TV picture
(
page 45).
Video Input Selection problems
If the
Source List
window does not appear when you
press on the remote control or TV, press a
second time, which will change to the next video input
source and display the
Source List
window.
Poor color or no color
The station may have broadcast difficulties. Try another
channel.
Adjust the
Tint
and/or
Color
(
page 35).
Poor composite or S-video picture
If the TV is connected to an external A/V device (e.g.,
DVD player, video game system, set-top box, etc.)
try using a
ColorStream
or
HDMI
video connection
instead.
Picture and sound are out of sync
As with all products that contain a digital display, in rare
instances, when viewing certain content (e.g.. television
broadcasts, video games, DVDs), you may notice that
the sound and picture are slightly out of sync. This
phenomenon can be caused by various factors including,
without limitation, video processing within the TV,
video processing in an attached gaming system, and
video processing or different compression rates used by
broadcasters in their programming. You may want to try
one or more of the following suggestions, which may
help to reduce the effect of this phenomenon:
If the TV is connected to an A/V receiver that has a
programmable audio delay feature, use this feature to
help synchronize the sound to the picture.
If you notice this phenomenon only on certain TV
channels, please contact your local broadcast, cable, or
satellite provider to inform them of this issue.
Sound problems
Check the antenna/cable connections (
Chapter 2).
The station may have broadcast difficulties. Try another
channel.
The sound may be muted. Press
VOL+ and VOL-
.
If you hear no sound, try setting the
MTS
feature to
Stereo
mode (
page 36,37).
If you are not receiving a second audio program from a
known SAP source, make sure the
MTS
feature is set to
SAP
mode (
page 36,37).
If you hear audio that seems “incorrect” for the program
you are watching (such as music or a foreign language),
the SAP mode may be on. Set the
MTS
feature to
Stereo
mode (
page 36,37).
Remote control problems
Make sure the remote control is set to the correct device
mode (
page 21).
Remove all obstructions between the remote control and
the TV.
The remote control batteries may be dead. Replace the
batteries (
page 20).
Your TV remote control may not operate certain features
on your external device. Refer to the owner’s manual
for your other device to determine its available features.
If your TV remote control does not operate a specific
feature on another device, use the remote control that
came with the device (
pages 22–26).
Channel tuning problems
Make sure the remote control is set to the correct device
mode (
page 21).
The channel may be setting to
"Not Viewable"
by the
Manual Ch Set
feature. Please set
"Viewable"
to
unblock the channel (
page 31).
If you are unable to tune digital channels, check the
antenna configuration (
page 29). If you are still
unable to tune digital channels, clear all channels from
the channel list (
page 31) and reprogram channels
into the channel memory (
page 30).
Chapter 8: Troubleshooting
6
Chapter 8: Troubleshooting
7
Closed caption problems
If the program or video you selected is not closed-
captioned, no captions will display (
page 35,36).
If text is not available, a black rectangle may appear. If
this happens, turn off the closed caption feature
(
page 35,36).
A closed-caption signal may not display correctly in
the following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard (
page 35,36).
Rating blocking (V-Chip) problems
If you forget your PIN code:
Press four times
within five seconds. The PIN code will be cleared and
you can enter a new PIN code.
The V-Chip feature is available for the U.S. V-Chip
system, or Canada (if available)(
page 39,40).
HDMI problems
For HDMI cables
Make sure to use cables with the HDMI Logo
( ) (
page 17).
For Legacy HDMI source
Some legacy HDMI sources may not work properly
with the latest HDMI TV products, due to new standard
adoption.
LED indications
The green or red LED lights on the TV front indicate the TV’
s status, as described below.
POWER
PO WE R
LED Indication Condition
1) Green The TV is operating properly.
2) Red Power off (standby mode)
If the problem still exists:
In the U.S., call TACP Consumer Solutions at
1-800-575-5469.
In Canada, locate the nearest Toshiba authorized service
depot by directing your web browser to www.toshiba.ca;
click “Home Entertainment,” and then click “Support.
TV front
LED Indication
8
Specications
Note:
This model complies with the specifications listed
below.
Designs and specifications are subject to change
without notice.
This model may not be compatible with features and/or
specifications that may be added in the future.
Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear,
unencrypted)
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Power Source:
120 V AC, 60 Hz
Power Maximum Current
26AV500U: 0.85 A
32AV500U: 1.30 A
37AV50U : 1.65 A
37AV500U: 1.65 A
42AV500U: 1.95 A
Power Consumption
26AV500U: 0.4 W in standby mode
32AV500U: 0.4 W in standby mode
37AV50U : 0.4 W in standby mode
37AV500U: 0.4 W in standby mode
42AV500U: 0.4 W in standby mode
Audio Power:
7W+7W for26”/32”; 10W+10W for 37”/42”
Video/Audio Terminals
S-VIDEO INPUT:
Y: 1 V(p-p), 75 ohm, negative sync.
C: 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k
ohm or greater)
ColorStream
®
(component video) HD INPUT:
VIDEO:Y: 1V(p-p), 75 ohm
P
R
: 0.7 V(p-p), 75 ohm
P
B
: 0.7 V(p-p), 75 ohm
Suggested formats: 1080i, 720p, 480p, 480i
AUDIO: 150 mV(rms), 22 k ohm or greater
HDMI™ INPUT:
HDMI compliant (type A connector)
HDCP compliant
Audio Lip Sync supported
Suggested formats: See table on the next page.
HDMI Audio: 2-channel Linear-PCM; 32/44.1/48 kHz
sampling frequency; 16/20/24 bits per sample
DIGITAL AUDIO OUTPUT:
Optical type
PC INPUT:
15-Pin D-sub Analog RGB
Dimensions
26AV500U:
Width: 2'2-1/8" (664 mm)
Height: 1'8-1/8" (511.4 mm)
Depth: 10-9/16" (269 mm)
32AV500U:
Width: 2'7-1/8" (790 mm)
Height: 1'11-1/16" (586.4 mm)
Depth: 1'-1/8" (308.4 mm)
37AV50U/37AV500U:
Width: 2'11-7/8" (910 mm)
Height: 2'1-3/4" (654 mm)
Depth: 1'-1/8" (308.4 mm)
42AV500U:
Width: 3'4-11/16" (1,034mm)
Height: 2'5-7/16" (748 mm)
Depth: 1'1-7/16" (341 mm)
Mass (Weight)
26AV500U: 27.5 lbs (12.5 kg)
32AV500U: 40.7 lbs (18.5 kg)
37AV50U : 49.8 lbs (22.6 kg)
37AV500U: 49.8 lbs (22.6 kg)
42AV500U: 59.9 lbs (27.2 kg)
Operating conditions
Temperature: 32ºF - 95ºF (0ºC - 35ºC)
Humidity: 20 - 80% (no moisture condensation)
Supplied Accessories
Remote control with two size “AAA” batteries
Owner’s manual (this book)
Cleaning cloth
Power cord
Chapter 9: Appendix
Chapter 9: Appendix
9
HDMI input supports the following signal formats:
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
VGA 640 × 480 59.940Hz 31.469kHz 25.175MHz
SVGA 800 × 600 60.320Hz 37.880kHz 40.000MHz
XGA 1024 × 768 60.000Hz 48.360kHz 65.000MHz
WXGA 1280 × 768 59.876Hz 47.776kHz 79.500MHz
WXGA 1360 × 768 60.015Hz 47.712kHz 85.500MHz
480i 720 × 480i 59.940Hz 15.730kHz 27.000MHz
480p 720 × 480p 59.940Hz 31.470kHz 27.000MHz
720p 1280 × 720p 60.000Hz 45.000kHz 74.250MHz
1080i 1920 × 1080i 60.000Hz 33.750kHz 74.250MHz
Note:
The PC IN AUDIO port just shared with the HDMI 1 for DVI signal and doesn't suport HDMI 2.
Chapter 9: Appendix
0
Limited United States Warranty
for LCD Televisions 26” and Larger
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
following limited warranties to original consumers in the United
States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER
OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE
U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.,
INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO,
ARE NOT COVERED BY THESE WARRANTIES.
LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF
THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND
MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY
THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor
TACP warrants this LCD Television and its parts against defects in
materials or workmanship for a period of one (1) year after the date
of original retail purchase.
DURING THIS PERIOD, TACP WILL,
AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE PART
WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO
YOU FOR PARTS OR LABOR. During this period,
TACP Authorized
Service Station personnel will come to your home when warranty
service is required. Depending on the type of repair required, the
service will either be performed in your home or the LCD Television
will be taken to a TACP Authorized Service Station for repair and
returned to your home at no cost to you.
Rental Units
The warranty for LCD Television rental units begins on the date of
the first rental or thirty (30) days after the date of shipment to the
rental firm, whichever comes first.
Limited Warranty for Commercial Units
TACP warrants LCD Televisions that are sold and used for
commercial purposes as follows: all parts are warranted against
defects in materials or workmanship for a period of ninety (90)
days after the date of original retail purchase. DURING THIS
PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR REPLACE
A DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this LCD
Television.
Complete and mail the enclosed product registration card or register
your LCD Television online at
www.tacp.toshiba.com/service
as
soon as possible. By registering your LCD Television you will enable
TACP to bring you new products specifically designed to meet
your needs and help us to contact you in the unlikely event a safety
notification is required under the U.S. Consumer Product Safety Act.
Failure to complete and return the product registration card
does not diminish your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must retain your original bill of sale or provide other proof
of purchase.
(2) All warranty servicing of this LCD Television must be performed
by an Authorized TACP Service Station.
(3) The warranties from TACP are effective only if this LCD
Television is purchased and operated in the Continental U.S.A.
or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems
are not covered by this warranty. Reception problems caused
by inadequate antenna systems, misaligned satellite dishes,
cable television distribution, VCRs, DVD players/recorders,
personal computer level IEEE-1394 devices, and any other
connected signal source device are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above, and do not extend to any LCD Television or
parts that have been lost or discarded by you or to damage to
the LCD Television or parts caused by fires, misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use in
violation of instructions furnished by TACP; use or malfunction
through simultaneous use of this LCD Television and
connected equipment; or to units that have been modified or
had the serial number removed, altered, defaced, or rendered
illegible.
How to Obtain Warranty Service
If, after following all of the operating instructions in this manual
and reviewing the section entitled “Troubleshooting,” you find that
service is needed:
(1) To find the nearest TACP Authorized Service Station, visit
TACP’s website at
www.tacp.toshiba.com/service
or contact
TACP’s Consumer Solution Center toll free at 1-800-575-5469.
(2) You must present your original bill of sale or other proof of
purchase to the TACP Authorized Service Station.
For additional information, visit TACP’s website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION
OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY ARRANTIES IMPLIED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION,
OR MODIFICATION OR ERASURE OF RECORDED DATA
CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD
TELEVISION).
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be
commenced to enforce any obligation of TACP arising under the
warranty or under any statute or law of the United States or any
state thereof is hereby limited to ninety (90) days from the date
you discover, or should have discovered, the defect. This limitation
does not apply to implied warranties arising under the law of any
state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY
FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN
IMPLIED WARRANTY, WHEN AN ACTION MAY BE BROUGHT,
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. THEREFORE, THE ABOVE
PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH
CIRCUMSTANCES.
[0305]
Chapter 9: Appendix
1
Limited Canadian Warranty
for Toshiba Brand Flat Panel Televisions
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
THESE LIMITED
WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA
BRAND FLAT PANEL TELEVISION (the “TELEVISION(S)” or
“Television(s)”) AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
TELEVISIONS PURCHASED IN CANADA, AND USED
ANYWHERE OUTSIDE OF CANADA INCLUDING, WITHOUT
LIMITATION, THE UNITED STATES AND MEXICO, ARE NOT
COVERED BY THESE WARRANTIES.
TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF
CANADA, INCLUDING, WITHOUT LIMITATION, THE UNITED
STATES AND MEXICO, AND USED IN CANADA, ARE NOT
COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
Subject to the more limited warranty if the Television is used for any
commercial or business purposes as set out below, TCL warrants
the Television and its parts against material defects in materials or
workmanship that result in the Television failing for a period of one
(1) year after the date of original retail purchase.
DURING THIS
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE
A DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU FOR PARTS OR LABOUR.
(a) FOR TELEVISIONS 32 INCHES OR LESS:
YOU MUST
DELIVER THE ENTIRE TELEVISION TO A TCL TELEVISION
AUTHORIZED SERVICE PROVIDER (“ASP”). YOU MUST PAY
FOR ALL TRANSPORTATION AND INSURANCE CHARGES
FOR THE TELEVISION TO AND FROM THE ASP.
(b) FOR TELEVISIONS OVER 32 INCHES: During this period, ASP
personnel will come to your home when warranty service is
required. Depending on the type of repair required, the service
will either be performed in your home or the Television will
be taken to an ASP for repair and returned to your home at
no cost to you.
IN-HOME SERVICE ONLY APPLIES WITHIN
100 KILOMETERS OF AN ASP. IF YOU ARE NOT WITHIN
100 KILOMETERS OF AN ASP, YOU MUST DELIVER THE
ENTIRE TELEVISION TO AN ASP. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE
TELEVISION TO AND FROM THE ASP.
Limited Warranty for Commercial Units
TCL warrants Televisions that are used for any commercial or
business purposes as follows: all parts are warranted against
material defects in materials or workmanship that result in the
Television failing for a period of ninety (90) days after the date of
original retail purchase.
DURING THIS PERIOD, TCL WILL, AT
TCL’S OPTION, REPAIR OR REPLACE THE DEFECTIVE PART
WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO
YOU.
(c) FOR TELEVISIONS 32 INCHES OR LESS:
YOU MUST
DELIVER THE ENTIRE TELEVISION TO AN ASP. YOU
MUST PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE TELEVISION TO AND FROM THE ASP.
(d) FOR TELEVISIONS OVER 32 INCHES: During this period, ASP
personnel will come on-site when warranty service is required.
Depending on the type of repair required, the service will either
be performed on-site or the Television will be taken to an ASP
for repair and returned at no cost to you.
ON-SITE SERVICE
ONLY APPLIES WITHIN 100 KILOMETERS OF AN ASP. IF
YOU ARE NOT WITHIN 100 KILOMETERS OF AN ASP, YOU
MUST DELIVER THE ENTIRE TELEVISION TO AN ASP. YOU
MUST PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE TELEVISION TO AND FROM THE ASP.
Rental Units
The warranty for Television rental units begins with the date of first
rental or thirty (30) days from the date of shipment to the rental
firm, whichever comes first.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this Television must be performed by
an ASP.
(3) The warranties from TCL are effective only if the Television is
(i) purchased as new and unopened from TCL or from TCLs
authorized distributors, dealers or resellers (“
ADRs
”) and (ii)
located/operated in Canada.
(4) Labour charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems
are not covered by these warranties. Reception problems
caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to material defects in materials or
workmanship as limited above, and do not extend to:
a. Service, repairs or replacement made necessary by
accident, misuse, abuse, moisture, liquids, dust, dirt,
neglect, accident, damage, 24/7 applications, improper
installation, improper operation, improper cleaning,
improper maintenance, normal wear and tear, screen burn
or image retention caused by prolonged display of static
images and/or phosphor aging, or any other external
cause or event, act or omission outside the control of
TCL, including fire, theft, acts of God, alteration, power
failures, power surges or power shortages, lightning, other
electrical faults, or repairs, modifications or replacements
by persons other than those authorized by TCL to service
the Television;
b. Replacement of missing, discarded or lost parts, the
provision of retrofits, or preventive maintenance;
c. Repair of damage that is cosmetic only or does not
affect the Television functionality, such as wear and tear,
scratches and dents;
d. Service on Toshiba-branded accessory items (such
accessory items may be covered by their own warranty);
e. Service on third party products or service made necessary
by use of incompatible third party products;
f. Service made necessary by the simultaneous use of this
Television and connected equipment;
g. Modifications to the Television not approved in writing by
TCL, and service made necessary by the use or installation
of non-Toshiba modifications to the Television;
h. Service of a Television on which the TOSHIBA label or
logo, rating label or serial number have been defaced or
removed;
i. On-site service and repair of the Television; and
j. Damage to the Television caused by failure to follow the
specifications, User manuals or guides as to usage and/or
storage.
Chapter 9: Appendix

Disclaimer and Limitation of Remedy
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER
EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND
REPRESENTATIONS FOR THIS TELEVISION, INCLUDING THE
IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED.
IF THE APPLICABLE LAW, STATUTORY OR OTHERWISE,
PRECLUDES THE EXCLUSION OF ANY IMPLIED WARRANTIES,
CONDITIONS AND REPRESENTATIONS THEN SUCH IMPLIED
WARRANTIES, CONDITIONS AND REPRESENTATIONS ARE
OTHERWISE LIMITED IN DURATION TO THE TERM OF THIS
EXPRESS WRITTEN LIMITED WARRANTY. TO THE EXTENT
NOT PRECLUDED BY LAW, STATUTORY OR OTHERWISE, THIS
WRITTEN WARRANTY SUPERCEDES AND SPECIFICALLY
DISCLAIMS ANY OTHER WARRANTY, CONDITION OR
REPRESENTATION NOT STATED IN THIS WARRANTY,
WHETHER MADE BY TCL, TOSHIBA CORPORATION,
THEIR AFFILIATES, ADRs AND ASPs AND WHETHER MADE
ORALLY OR IN WRITING (INCLUDING ANY STATEMENT IN
ANY BROCHURE, PRESS RELEASE, ANNOUNCEMENT,
ADVERTISEMENT, POINT OF SALE DISPLAY, ETC.).
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE
INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR
MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION MAY
NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE.
THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS
REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF ANY
FAILURE TO FOLLOW THE SET-UP AND USAGE INSTRUCTIONS.
THIS WARRANTY DOES NOT APPLY AND SHALL BE VOID AND
UNENFORCEABLE IF THE TELEVISION IS OPENED, SERVICED,
OR REPAIRED BY PERSONS OTHER THAN THOSE AUTHORIZED
BY TCL TO SERVICE OR REPAIR THE TELEVISION.
IF THE TELEVISION FAILS TO WORK AS WARRANTED ABOVE,
YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR
REPLACEMENT OF THE DEFECTIVE PART. IN NO EVENT WILL
TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR
ASPs (THE
RELATED PARTIES
”) BE LIABLE TO YOU OR ANY
THIRD PARTY FOR ANY DAMAGES, MONEY, REIMBURSEMENT,
COSTS OR EXPENSES. THIS LIMITATION APPLIES TO
DAMAGES, MONEY, REIMBURSEMENT, COSTS OR EXPENSES
OF ANY KIND WHATSOEVER INCLUDING ANY DIRECT OR
INDIRECT DAMAGES, DAMAGE TO PROPERTY OR ERSON,
LOST PROFITS, LOST SAVINGS, INCONVENIENCE OR OTHER
SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL
DAMAGES, WHETHER FOR BREACH OF WARRANTY, BREACH
OF CONTRACT, TORT (INCLUDING NEGLIGENCE), UNDER A
STATUTE OR NDER ANY OTHER LAW OR FORM OR ACTION, OR
WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE
THE TELEVISION, VEN IF ANY OF THE RELATED PARTIES HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
OF ANY CLAIM BY ANY OTHER PARTY.
No person, agent, distributor, dealer or company is authorized
to change, modify or extend the terms of these warranties in any
manner whatsoever.
Arbitration and Dispute Resolution
To the extent not precluded by law, any claim, dispute, controversy
or disagreement (whether for breach of warranty, breach of
contract, tort (including negligence), under a statute or under
any other law or form of action) against any of the Related Parties
arising out of, or otherwise relating to: (i) this warranty; (ii) the
Television; (iii) any oral or written representations, statements,
brochures, press releases, advertising, announcement, point of
sale display, or promotional material relating to the Television;
(iv) the relationships that result from this warranty, (the foregoing
claims, disputes controversies and disagreements are collectively
referred to as the “Dispute”), shall be referred to and resolved by
final and binding arbitration (to the exclusion of the courts). To
the extent not precluded by law, you agree to waive any right that
you may have to commence or participate in any representative
or class proceeding against the Related Parties relating to any
Dispute. If and where applicable and to the extent not precluded
by law, you further agree to opt out of any such representative or
class proceedings. Arbitration of any Dispute will be conducted
in the forum and in the manner as agreed to between you and
TCL. Failing such agreement, the arbitration will be conducted by
one arbitrator pursuant to the laws and rules relating to arbitration
generally in force in the jurisdiction in which you reside at the time
that the Dispute arises. To the extent not precluded by law, no
claim, dispute, controversy or disagreement of any other person
may be joined or combined with any Dispute by you, without the
prior written consent of TCL.
Critical Applications
The Television you have purchased is not designed for any “critical
applications.” “Critical applications” means life support systems,
medical applications, connections to implanted medical devices,
commercial transportation, nuclear facilities or systems or any
other applications where Television failure could lead to injury to
persons or loss of life or catastrophic property damage.
IF THE CUSTOMER USES THE TELEVISION IN ANY CRITICAL
APPLICATION, THE CUSTOMER - AND NOT TCL, ITS AFFILIATES,
ADRs OR ASPs - ASSUME SOLE AND FULL RESPONSIBILITY
FOR SUCH USE. TCL RESERVES THE RIGHT TO REFUSE TO
SERVICE ANY TELEVISION USED IN A CRITICAL APPLICATION.
TCL, ITS AFFILIATES, ADRs AND ASPs HEREBY DISCLAIM ANY
AND ALL LIABILITY, DAMAGES AND CONSEQUENCES ARISING
OUT OF THE SERVICE OR REFUSAL TO SERVICE SUCH
TELEVISION AND FURTHER DISCLAIM ANY AND ALL LIABILITY,
CONSEQUENCES AND DAMAGES THAT MAY ARISE OR
RESULT FROM THE USE OF THE TELEVISION IN ANY CRITICAL
APPLICATIONS.
General Provisions
If and to the extent that any provision of this limited warranty
should generally be found to be unenforceable, the unenforceable
provision shall be severed from the warranty and deemed not to
form part of the warranty. The remaining provisions of this warranty
shall be and remain valid and enforceable. If and to the extent
that any provision of this limited warranty as it relates to any of the
Related Parties is found to be invalid or unenforceable in respect
of that party (the “
Excluded Party
”), the Excluded Party shall be
deemed to be severed or excluded from the provision, and the
provision shall remain valid, enforceable and applicable in respect
of the other or remaining Related Parties.
To the extent permitted by law, this limited warranty shall be
governed and construed in accordance with the laws of Ontario.
If there is any inconsistency between this limited warranty, on the
one hand, and any statement in the packaging of the Television
or in any other document enclosed with, or used in the context
of the promotion or sale of, the Television, on the other hand, the
provisions of this limited warranty shall prevail.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and
checking the “Troubleshooting” section, you find that service is
needed:
(1) To find the nearest ASP, visit TCLs web site at
www.toshiba.ca
,
or call toll free 1-800-268-3404
(2) Present your bill of sale or other proof of purchase to the ASP.
For additional information, visit TCLs website at
www.toshiba.ca

Notes
TOSHIBA AMERICA CONSUMER PRODUCTS, L.L.C.
Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
TOSHIBA OF CANADA LTD.
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470- 5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA – TEL: (514) 390-7766
VANCOUVER: 13551 COMMERCE PARKWAY, SUITE 110, RICHMOND, B.C., V6V 2L1, CANADA – TEL: (604) 303-2500
CableClear, ColorStream, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C.
Channel Browser and DynaLight are trademarks of Toshiba America Consumer Products, L.L.C.
PRINTED IN CHINA
(HDA51V3201I)
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba 42AV500U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba 42AV500U in de taal/talen: Engels als bijlage per email.

De handleiding is 7,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Toshiba 42AV500U

Toshiba 42AV500U Gebruiksaanwijzing - Nederlands - 31 pagina's

Toshiba 42AV500U Gebruiksaanwijzing - Deutsch - 31 pagina's

Toshiba 42AV500U Gebruiksaanwijzing - Français - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info