471090
13
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
For the tool to be used properly it is imperative to
follow the instructions set out in the manufacturer’s
directions for use.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.
7. Before starting
You can adjust the height of the grass trimmer and
the position of the auxiliary handle to obtain the
optimal working position.
Adjusting the height:
Rest the grass trimmer firmly on the ground. Using
the slide button (see Figure 7 / Item 1) each user can
now adjust the height of the trimmer to suit his own
stature. Make sure the height adjuster latches
securely in place.
Adjusting the position of the auxiliary handle:
Rest the grass trimmer firmly on the ground. Slacken
the screw (Figure 8 / Item 1) and move the auxiliary
handle to the optimal position. Tighten the screw to
fix the handle in place.
8. Starting for the first time and
operation
The grass trimmer is designed only for cutting grass.
It is equipped with a fully automatic line extension
system. During operation of the trimmer the line will
become shorter. Upon reaching a diameter of
approx. 230 mm it will be automatically extended to
its maximal cutting width (approx. 300 mm) to ensure
that you always cut your lawn with the optimal cutting
width.
N.B.:
When you start your grass trimmer for the first
time, the end of any projecting surplus line will
be shortened by the guard hood blade.
Your grass trimmer will work at its best if you
observe the following instructions:
Ȝ Never use the grass trimmer without its safety
devices.
Ȝ Do not cut grass when it is wet. The best results
are had on dry grass.
Ȝ Connect the power cable to an extension cable
and hook the extension cable on the handle
(Figure 9).
Ȝ To activate the grass trimmer, press the On/Off
switch (Figure 1 / Item 3).
Ȝ To deactivate the grass trimmer, let go of the
On/Off switch (Figure 1 / Item 3).
Ȝ Do not move the grass trimmer against the grass
until the switch is pressed, i.e. wait until the
trimmer is running.
Ȝ For the correct cutting action, swing the grass
trimmer to the side as you walk forward, holding
it at an angle of approx. 30° as you do so (see
Figure 10 and Figure 11).
Ȝ Make several passes to cut long grass shorter
step by step from the top (see Figure 12).
Ȝ Make full use of the edge guide and the guide
hood in order to avoid unnecessary line wear
(see Figure 13 and Figure 14).
Ȝ Keep the grass trimmer away from hard objects
in order to avoid unnecessary line wear.
9. Using the grass trimmer as an edge
cutter
The grass trimmer can be adapted in the following
way to cut the edges of lawns and flower beds:
Ȝ Disconnect the grass trimmer from the power
supply!
Ȝ Press the handle adjusting button (Figure 15)
Ȝ While pressing the handle adjusting button, turn
the upper handle through 180° (Figure 16) until it
latches in place.
Ȝ The grass trimmer has now been converted into
an edge cutter suitable for vertical cutting (Figure
17).
10. Replacing the line spool
Be sure to disconnect the power plug from the power
supply by you replace the line spool!
Ȝ Squeeze the spool cover at the positions marked
on the side and take off the cover (Figure 18 and
Figure 19).
Ȝ Take out the empty spool.
Ȝ Thread the end of the line from the new line
spool through the eyelets of the spool mount
(Figure 20).
Ȝ Refit the spool cover.
Ȝ The line will be automatically shortened to the
optimal length when the grass trimmer is next
started.
Caution! Catapulted pieces of nylon line may
cause injury!
11. Cleaning and maintenance
Ȝ Switch off and unplug the grass trimmer before
putting it away or cleaning it.
Ȝ Remove deposits from the guard hood with a
brush.
Ȝ Clean the plastic body and plastic parts with a
mild household detergent and a damp cloth.
Ȝ Never use aggressive agents or solvents for
cleaning purposes!
Ȝ Never spray down the grass trimmer with water.
Prevent water getting into the trimmer at all cost.
GB
13
Anleitung TCR 450 4-spr. 24.10.2001 12:23 Uhr Seite 13
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Topcraft-TCR-450

Zoeken resetten

  • Waar koop ik de draad voor de grastrimm TCR 450 ? Gesteld op 7-7-2016 om 17:54

    Reageer op deze vraag Misbruik melden
    • goedeavond ik heb het adres even op gezocht en daar hebben ze alles van topcrafttcr450{

      VARO - Vic. Van Rompuy nv
      Joseph Van Instraat 9
      2500 Lier
      België


      Tel. +32 (0)3 292 92 92
      Fax +32 (0)3 292 92 72
      info@varo.com
      www.varo.com
      daar kunt u even naar bellen en ze sturen het op groetjesinemarie Geantwoord op 7-7-2016 om 19:01

      Waardeer dit antwoord (1) Misbruik melden
  • Ls, Ik heb een Buxus en grasschaar gekocht bij de Aldi. Het apparaat is nu leeg. Maar wat blijkt er zit geen oplaadsnoer bij in de verpakkingsdoos! OP de doos staat het nummer: GBS 9054 LI. Kunt U mij een oplaadsnoer toesturen. Mijn naam is; Hr. J.van der Velden, woon Oude Vischmarkt 5, 5301 CZ Zaltbommel. Gesteld op 6-8-2015 om 17:35

    Reageer op deze vraag Misbruik melden
    • goede middag dan moet u even dit nr bellen dat is de fabricant van topcraft ik heb dat ook al een paar keer gedaan het telfoon nr is +32(0)32929292-fax+32(0)32929272hoop dat u daar wat aan heeft veel sucsesinemarie@zeelandnet.nl Geantwoord op 7-8-2015 om 14:26

      Waardeer dit antwoord Misbruik melden
  • waar kan ik onderdelen bestellen voor een topcraft grastrimmer tcr 450 Gesteld op 19-6-2012 om 18:04

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Topcraft TCR 450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Topcraft TCR 450 in de taal/talen: Duits, Engels, Frans, Deens als bijlage per email.

De handleiding is 3,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info