293053
22
Verklein
Vergroot
Pagina terug
1/168
Pagina verder
WIRELESS IP CAM 2000
WIRED IP CAM 1000
USER GUIDE / HANDLEIDING / MANUEL D’UTILISATEUR /
GEBRAUCHSANWEISUNG / MANUAL DE USUARIO /
BRUKSANVISNING / BRUGERVEJLEDNING /
ANVÄNDARHANDBOK / KÄYTTÖOHJE / MANUALE D’USO /
MANUAL DO UTILIZADOR
1.1
FOR USE IN:
BELGIUM, HOLLAND, GERMANY, SWEDEN, DENMARK, NORWAY, FINLAND, SPAIN,
ITALY, PORTUGAL, GREECE, TURKEY, UNITED KINGDOM, POLAND, RUSSIA
This product is made by Topcom Belgium
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC
.
The Declaration of conformity can be found on :
http://www.topcom.net/support/cedeclarations.php
UK The features described in this manual are published with reservation to
modifications.
NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder
voorbehoud van wijzigingen.
FR Les possibilités décrites dans ce manuel sont publiées sous réserve de
modifications.
DE Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden
vorbehaltlich Änderungen publiziert.
ES Las características descritas en este manual pueden ser objeto de futuras
modificaciones.
SE Funktionerna i denna bruksanvisning publiceras med reservation för ändringar.
DK Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet i
denne brugsanvisning.
NO Funksjoner beskrevet i denne manualen kan endres uten nærmere
informasjon.
FI Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman ennakkoilmoitusta.
IT Le caratteristiche descritte nel presente manuale vengono pubblicate con
riserva di modifica.
PT As características descritas neste manual são publicadas sob reserva de
poderem ser modificadas.
Wireless IP Cam 2000 / Wired IP Cam 1000 3
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
1 Hardware installation
Attach the Camera Stand
The IP Camera comes with a camera stand. It has a swivel ball screw head that can be
attached to the camera's screw hole on the top/bottom panel. Attach the camera stand to the
camera and station it for your application.
Back panel
Ethernet connection: Connect an Ethernet cable to the network cable connector at the
camera's rear panel, then connect it to your network ( for example : your broadband cable/
DSL router)
The Antenna connector (for the wireless model IP CAM 2000): Screw the antenna on the
ANT connection and positionize it vertically.
Power connection: Connect the power supply to the 5V DC connection. Then plug in the
power adapter in the mains power outlet.
Reset button: If the reset button is pressed for more then 10 seconds, the camera will load
all default settings.
2 Software installation
Make sure that the IP CAM is connected by an Ethernet cable to your network.
Insert the CD rom into your computer.
The wireless model should also be connected by a network cable at this
point.
4 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
The Autorun menu will automatically start.
Click "Install Wizard Software"
The installation of the software will start.
Click "Next" to continue.
Wireless IP Cam 2000 / Wired IP Cam 1000 5
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
Click "Yes" to continue.
6 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
Click "Next"
' Click "Finish".
Now the Setup Wizard software is successfully installed.
3 The Setup Wizard.
Make sure that the IP CAM is connected by an Ethernet cable to your network.
To run the setup wizard , click Start - Programs - Setup Wizard.
The Utility will start up.
Wireless IP Cam 2000 / Wired IP Cam 1000 7
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
The Setup Wizard will show the cameras that are connected to your network.
The default IP address of the IP CAM is 192.168.1.90.
If your network is in a different subnet, it is recommended to run the Wizard first.
If your network is in the same subnet as the IP CAM, you can access the IP CAM's web
interface by clicking the Link button.
In this case it is not necessary to click the Wizard button!
To run the "Wizard", click the button.
If the IP CAM is not in the same Subnet as your local network, next message will appear:
Click "Yes" to continue
8 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
Now a login screen will appear:
By default, the username and password are both admin.
Click OK to continue.
Now you can change IP CAM's IP address, Subnet Mask and Gateway.
Please make sure that the new IP address will be in the same subnet as your LAN network.
The Gateway should be the IP address of your Internet router.
If the IP Cam is not in the same subnet, it is not possible to access the web interface and you
will not be able to see the images !
Click OK to proceed.
The Camera will restart now.
Click to find the IP CAM with the new IP address.
Wireless IP Cam 2000 / Wired IP Cam 1000 9
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
4 Start using the camera
Select the camera in the software utility and click the button to open the Cam
Web page.
The IP Cam screen will appear:
A snapshot will be seen in this screen.
To view the real time video, click View Video-ActiveX Mode.
The web page can also be accessed by opening the Internet Explorer en by
entering the IP CAM's IP address in the URL window:
10 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
The login screen will appear:
Enter User name / password : admin / admin
Click OK to enter.
The first time you want to view the video images in ActiveX mode, next screen will appear:
Click Yes to install the ActiveX component.
In the System Administration, you can create users with a username/
password to view the camera.
Wireless IP Cam 2000 / Wired IP Cam 1000 11
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
Now you can see the video images:
If Java is installed on your computer, the video can be viewed by clicking View Video - Java
Mode.
5 System Administration
In the IP Cam's web page, click System Administration
The Administrator login screen will appear:
Enter User name / password : admin / admin
Click OK to enter.
12 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
5.1 System
Camera name: by default the last digits of the MAC address are used in the camera
name. This name can be changed.
Location: You can enter the name of the location where you have installed the IP Cam.
Admin: Admin ID / password are by default admin / admin. If you want you can change
the administrators login.
LED Control: Normal, OFF or Dummy
Click Save to save the settings.
5.2 Video
In this screen all video settings can be set. Please make sure that the Light Frequency
is set at your mains frequency.
Click Save to save the settings.
Wireless IP Cam 2000 / Wired IP Cam 1000 13
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
5.3 Wireless (only for the wireless model)
Wireless Interface
Connection Mode: Choose Infrastructure to connect the Wireless IP cam to a wireless
router or wireless access point.
SSID: enter the same SSID as in your Wireless router or wireless access point
Site Survey: click this button to view all available wireless networks.
14 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
Encryption
Choose the same encryption type as used in your wireless router or wireless access
point. (WEP / WPA-PSK)
Enter the encryption key.
In the example above WEP encryption is used (64bit, HEX-key, Open System)
Click Save to save settings.
Wireless IP Cam 2000 / Wired IP Cam 1000 15
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
5.4 Network
IP Address Mode:
Enter the IP address / Subnet Mask and Default Gateway in case of fixed IP
address (recommended). The Gateway will be your Internet Router IP address.
If your network has a DHCP server, you can choose Dynamic IP. (not
recommended)
If the IP Cam is connected behind a DSL bridge, you can enter the PPPoE User
ID and Password to get connected to the Internet.
DNS IP Address: Two DNS server addresses can be entered. If your Internet router has
a DNS relay, you can enter your Router IP address here.
Dynamic DNS: In case the camera is connected directly to a cable/DSL modem, you
can enter the DynDNS setting if used.
Second HTTP Port: If you enable this option, you can use another port to view the IP
Cam. This option should be enabled when the DynDNS service is used in your router to
view the camera from a remote site.
UPNP: Enabled by default.
Please read the user guide “Use Dynamic DNS service” on the provided CD
for viewing the camera from a remote site by use of Dynamic DNS.
16 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
5.5 User
You can create a list of users that are authorized to view the IP Cams images.
Enable Access Control
Enter a User name and User Password and click Add.
When all users are created, click Save to save the settings.
For other settings, please check the full userguide on the provided CD.
6 Firmware update
When a new firmware version is available on the Topcom support website, you can download
it and update the camera.
Go to the Tools page and select Firmware upgrade
Browse for the file you have downloaded from the Topcom website and click Upgrade.
Wireless IP Cam 2000 / Wired IP Cam 1000 17
Wireless IP Cam 2000 / Wired IP Cam 1000
ENGLISH
7 Warranty
7.1 Warranty period
Topcom units have a 24-month warranty period. The warranty period starts on the day the
new unit is purchased. Consumables or defects causing a negligible effect on operation or
value of the equipment are not covered.
The warranty has to be proven by presentation of a copy of the original purchase receipt, on
which the date of purchase and the unit-model are indicated.
7.2 Warranty handling
A faulty unit needs to be returned to an authorized service centre including a valid purchase
note. If the unit develops a fault during the warranty period, the service centre will repair any
defects caused by material or manufacturing faults free of charge.
The service centre will at its discretion fulfil its warranty obligations by either repairing or
exchanging the faulty units or parts of the faulty units. In case of replacement, colour and
model can be different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period
is not extended if the unit is exchanged or repaired by the appointed service centres.
7.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from
use of non-original parts or accessories are not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and
fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the unit has been changed, removed or
rendered illegal.
8 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product,
user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.
The CE symbol indicates that the unit complies with the essential
requirements of the R&TTE directive.
18 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
1 Hardware installeren
De camerastander monteren
Bij de IP Camera wordt een camerastander meegeleverd. Die stander heeft een
scharnierende schroefkop die in het schroefgat boven- of onderaan op de camera kan
worden bevestigd. Bevestig de camerastander op de camera en positioneer de camera voor
uw toepassing.
Achterkant paneel
Ethernet-aansluiting: Steek een Ethernet-kabel in de aansluiting voor de netwerkkabel op
het achterpaneel van de camera, en sluit vervolgens aan op uw netwerk (bijvoorbeeld: uw
breedbandkabel/DSL-router)
De antenneaansluiting (voor het draadloze model IP CAM 2000): Schroef de antenne op
de ANT-aansluiting en plaats hem verticaal.
Netaansluiting: Steek de voeding in de 5V DC-aansluiting. Steek vervolgens de netadapter
in de wandcontactdoos.
Reset-knop: Wanneer u de reset-knop langer dan 10 seconden ingedrukt houdt, laadt de
camera alle standaardinstellingen.
2 Software installeren
Zorg ervoor dat de IP CAM via een Ethernet-kabel is aangesloten op uw netwerk.
Plaats de cd-rom in uw computer.
Het draadloze model moet hier ook via een netwerkkabel zijn aangesloten.
Wireless IP Cam 2000 / Wired IP Cam 1000 19
Wireless IP Cam 2000 / Wired IP Cam 1000
NEDERLANDS
Het Autorun-menu zal automatisch starten.
Klik op "Install Wizard Software"
De software wordt geïnstalleerd.
Klik op "Next" om verder te gaan.
20 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
Klik op "Yes" om verder te gaan.
Wireless IP Cam 2000 / Wired IP Cam 1000 21
Wireless IP Cam 2000 / Wired IP Cam 1000
NEDERLANDS
Klik op "Next"
Klik op "Finish".
Nu is de Setup Wizard-software geïnstalleerd.
3 De Setup Wizard.
Zorg ervoor dat de IP CAM via een Ethernet-kabel is aangesloten op uw netwerk.
Klik op Start - Programs - Setup Wizard om de Setup Wizard te starten.
Het hulpprogramma wordt gestart.
22 Wireless IP Cam 2000 / Wired IP Cam 1000
Wireless IP Cam 2000 / Wired IP Cam 1000
De Setup Wizard geeft de camera’s weer die zijn aangesloten op uw netwerk.
Het standaard IP-adres van de IP CAM is 192.168.1.90.
Als uw netwerk in een ander subnet ligt, raden we u aan eerst de Wizard te starten.
Als het subnet van uw netwerk hetzelfde als dat van de IP CAM, krijgt u toegang tot de
webinterface van de IP CAM door te klikken op de Link-knop.
In dit geval hoeft u niet op de Wizard-knop te klikken!
Om de "Wizard" te starten, klikt u op .
Als de IP CAM niet hetzelfde subnet heeft als uw lokale netwerk, verschijnt het volgende
bericht:
Klik op "Yes" om verder te gaan.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Topcom wireless ip cam 2000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Topcom wireless ip cam 2000 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info