300666
14
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
USER MANUAL
HANDLEIDING
MANUEL D’UTILISATEUR
GEBRAUCHSANWEISUNG
MANUAL DE USUARIO
BRUKSANVISNING
BRUGERVEJLEDNING
ANVÄNDARHANDBOK
KÄYTTÖOHJE
v.1.0
BUTLER 2900C MULTI HANDSET
B2900_C.book Page 1 Friday, January 9, 2004 1:39 PM
GB The features described in this manual are published with reservation to modifications.
NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder
voorbehoud van wijzigingen.
F Les possibilités décrites dans ce manuel sont publiées sous réserve de modifications.
D Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden vorbehaltlich
Änderungen publiziert.
ES Las características descritas en este manual pueden ser objeto de futuras modificaciones.
S Funktionerna i denna bruksanvisning publiceras med reservation för ändringar.
DK Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet
i denne brugsanvisning.
N Funksjoner beskrevet i denne manualen kan endres uten nærmere informasjon.
SF Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman ennakkoilmoitusta.
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.
The Declaration of conformity can be found on :
http://www.topcom.net/support/cedeclarations.php
B2900_C.book Page 2 Friday, January 9, 2004 1:39 PM
Topcom Butler 2900C 3
ENGLISH
Topcom Butler 2900C
1. BUTTONS 5
2. DISPLAY 6
3. INSTALLATION 7
4. BATTERY LOW INDICATION 8
5. OPERATION 8
5.1 Register to a Topcom B29xx/2800/2820 base 8
5.2 Removing a handset 9
5.3 Outgoing calls 10
5.4 Incoming calls 10
5.5 Activate/deactivate hands free function 10
5.6 Programming memory numbers 10
5.7 Calling a memory number 11
5.8 Mute function 11
5.9 Setting the volume 11
5.10 Out of range warning 11
5.11 Setting the ring volume and melody 11
5.12 Key lock 12
6. CALL TRANSFER AND INTERCOM
BETWEEN TWO HANDSETS 12
6.1 Call transfer and conference call during an
external call 12
6.2 Internal call (intercom) 12
7. TOPCOM WARRANTY 13
8. TROUBLESHOOTING 13
9. TECHNICAL DATA 14
10. DEFAULT SETTINGS 14
B2900_C.book Page 3 Friday, January 9, 2004 1:39 PM
4 Topcom Butler 2900C
Topcom Butler 2900C
SAFETY INSTRUCTIONS
Only use the charger plug supplied. Do not use other chargers, as this
may damage the battery cells.
Only insert rechargeable batteries of the same type. Never use
ordinary, non-rechargeable batteries. Insert rechargeable batteries so
they connect to the right poles (indicated in the battery compartment
of the handset).
Do not touch the charger and plug contacts with sharp or metal
objects.
The operation of some medical devices may be affected.
The handset may cause an unpleasant buzzing sound in hearing aids.
Do not place the basic unit in a damp room or at a distance of less
than 1.5 m away from a water source. Keep water away from the
handset.
Do not use the telephone in environments where there is a risk of
explosions.
•Dispose of the batteries and maintain the telephone in an
environment-friendly manner.
As this telephone cannot be used in case of a power cut, you should
use a mains-independent telephone for emergency calls, e.g. a
mobile phone.
This telephone uses rechargable batteries. You have to dispose of the
batteries in an environment friendly manner according to your specific
country regulations.
CLEANING
Clean the telephone with a slightly damp cloth or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
NiMH
B2900_C.book Page 4 Friday, January 9, 2004 1:39 PM
Topcom Butler 2900C 5
ENGLISH
Topcom Butler 2900C
1. BUTTONS
1 Numerical buttons
2Line button
3 Redial / Pause button
4Flash R/ Scroll
R/
5 Memory button
6 Mute button
7 Int button
Int
8 Charge indicator (LED)
9 Call log/Scroll /
10 Volume/melody button /
11 Key lock
12 Ringer ON/OFF
13 Handsfree
/P
/P
7
PQRS
4
GHI
2
ABC
5
JKL
8
TUV
0
3
DEF
6
MNO
9
WXYZ
1
R
INT
//
#
Butler 2900C
1
6
5
10
9
3
8
2
11
7
12
13
4
B2900_C.book Page 5 Friday, January 9, 2004 1:39 PM
6 Topcom Butler 2900C
Topcom Butler 2900C
2. DISPLAY
ICON: MEANING:
You are online
New numbers in call list
Rechargeable battery level indicator
The antenna indicates the quality of reception.
The antenna blinks when the handset is out of range!
Microphone is muted
Memory records are being retrieved or set up
The keypad is locked
There are more digits on the left
There are more digits on the right
During hands free
When ring buzzer is turned off
There are new messages in your voice mail
During internal call
HS-x x = handset number
B2900_C.book Page 6 Friday, January 9, 2004 1:39 PM
Topcom Butler 2900C 7
ENGLISH
Topcom Butler 2900C
3. INSTALLATION
Connect the AC adaptor to the electric socket
•Insert 2 rechargeable batteries (AAA) inside the battery compartment
of the handset...
Put the handset on the charger. The red Charge LED will lit as
long as the handset is on the charger.
Charge the handset for a period of 24 hours before using the handset for
the first time. To extend the battery life time, discharge the batteries
completely from time to time. As soon as the handset emits a warning tone
or when the battery icon is empty, you have to put it back on the charger
unit for charging.
+-
-+
B2900_C.book Page 7 Friday, January 9, 2004 1:39 PM
8 Topcom Butler 2900C
Topcom Butler 2900C
4. BATTERY LOW INDICATION
When the battery is empty, the handset no longer carries out operations.
When a battery is completely empty and you have put the handset on the
base unit for a short period of time, the Battery symbol will appear to be
fully charged but this is actually not the case. The battery capacity will
decrease rapidly. We advise you to put the handset on the base unit for 12
hrs so that it can be recharged completely.
Full battery
Empty battery
When you are in the middle of a conversation and the battery is almost
empty, the handset will emit a warning signal. Place the handset on the
base unit to charge.
5. OPERATION
5.1 REGISTER TO A TOPCOM B29XX/2800/2820 BASE
You can subscribe 5 handsets to one base unit. By default, each handset
is subscribed as handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if: !!!
The handset subscription has been removed from the base unit (e.g.
for reinitialisation)
You want to subscribe a different handset to this base unit.
The underlined procedure is only applicable to a Topcom
Butler 29xx,
2900, 2920
handset and base unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the
Line/Charge indicator
on the base unit begins to blink rapidly. The Line/Charge indicator will blink
rapidly
for one minute. During this minute, the base unit is in register mode and
you must do the
following to subscribe the handset:
Press and hold the
a
nd key for 3 sec.
The following will appear on the display:
B2900_C.book Page 8 Friday, January 9, 2004 1:39 PM
Topcom Butler 2900C 9
ENGLISH
Topcom Butler 2900C
Enter the number of the base unit you would like to subscribe the
handset to (1-4)
The unit will start searching for the base and when found it will ask to
enter the pin code (4 digits):
Enter the base pin code (0000). If the pin is wrong, the handset will
restart the searching for the base.
•When the handset is registered, it will show ‘HS’ followed by the
handset number.
5.2 REMOVING A HANDSET
You can remove a handset from a base to allow another handset to be
registered:
Press and hold the mute and redial key for 3 sec.
Enter the pin code (0000). If the pin is wrong, the handset will go
back to standby.
Enter the handset number (1-5) you want to remove
The unit will go back to standby is the removal is successfully. If not,
it will ask again to enter the handset number
Remark: You can only remove existing handsets and others
then the one you are using
PIN
PIN 1234 H5-
B2900_C.book Page 9 Friday, January 9, 2004 1:39 PM
10 Topcom Butler 2900C
Topcom Butler 2900C
5.3 OUTGOING CALLS
5.3.1 Making a phone call
Press the Line button . You will hear the dial tone.
Enter the desired telephone number.
Press the Line button when you want to terminate the call.
5.3.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button . When you haven’t
pressed a button for 10 seconds, the number you’ve already entered
will disappear and the handset returns to standby mode.
Press the Line button . The number will be dialled automatically.
Press the Line button when you want to terminate the call.
5.4 INCOMING CALLS
•When a call comes in, the handset will start to ring. The LED on
the base will blink.
Press the Line button to answer the incoming call.
5.5 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION
This function allows you to communicate without having to pick up the
handset. When you are on the phone, press the Hands free key to
activate the hands free function.
Press the same button to deactivate the hands free function.
Note : When you are calling in hands free mode and you want to
change the volume, press the Volume
button .
Attention !! When you use the hands free function for a long
time, the batteries will be empty more quickly !
5.6 PROGRAMMING MEMORY NUMBERS
You can program 10 indirect numbers (of max. 25 digits) in the phone’s
memory.
Press and hold the Memory button until the -icon appears on the
display.
Enter the telephone number you whish to store.
Press the Memory button again to confirm.
Enter the memory location (0-9) where you want to store the number.
You will hear a confirmation tone and the -icon will disappear.
Remarks :
If you wish to insert a pause, press the Redial/Pause button
on the location where you want a pause of 3 sec.
/P
B2900_C.book Page 10 Friday, January 9, 2004 1:39 PM
14 Topcom Butler 2900C
Topcom Butler 2900C
9. TECHNICAL DATA
Range: up to 300 m in open space
up to 50 m in buildings
Dialling options: DTMF (tone) and Pulse
Batteries: 2 x 1.2V, 600 mAh AAA Type NiMH
rechargeable
Max. standby time: approx. 120 hours
Max. talk time: 13 hours
Ambient temperature: +5 °C to +45 °C
Permitted relative air humidity: 25 to 85 %
Power supply base adapter: 220/230V , 50 Hz
Memories 10 indirect with max. 25 digits
10. DEFAULT SETTINGS
Flash time 100 ms
Ring volume Level 3
Ring melody Ringer 8
The CE symbol indicates that the unit complies with the essential
requirements of the R&TTE directive.
B2900_C.book Page 14 Friday, January 9, 2004 1:39 PM
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Topcom butler 2900c bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Topcom butler 2900c in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info