483952
8
Verklein
Vergroot
Pagina terug
1/123
Pagina verder
8
Twintalker 9500
13.10.3 Scanning for a DCS code
Once there is a transmission on the channel, the DCS code (if used) will be detected and
displayed.
13.11 Call Tones
A call tone alerts others that you want to start talking.
13.11.1 Setting the Call Tone
The Twintalker 9500 has 15 call tones.
13.11.2 Sending a call Tone
Press the button briefly. The call tone will be transmitted on the set channel.
13.11.3 Call tone reception type
Press the -button nine times.
Press the -button or -button to select the call tone reception type.
1. Tone only
2. Tone + vibration
3. Vibration only
Press the -button to confirm and return to stand-by mode.
13.12 Roger Beep On/Off
After the -button is released, the unit will send out a roger beep to confirm that you have
stopped talking.
To set the Roger Beep.
• Press the - button ten times.rO’ will be displayed.
• Press button to enable (ON) or button to disable the Roger-
Beep (OFF).
• Press the - button to confirm your selection and return to the
standby mode.
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press button eleven times. ‘tO’ will be displayed.
• Press button to enable (ON) or button to disable the Key
Tones (OFF).
• Press the - button to confirm your selection and return to the.
standby mode.
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one channel with CTCSS/DCS code. The PMR will only receive
signals transmitted on that channel with the CTCSS/DCS code.
Dual Channel Monitor (DCM) allows you to monitor a second channel with CTCSS/DCS code.
When the Dual Channel Monitor function is activated, the PMR will switch sequentially between
the standby channel + CTCSS/DCS code and the Dual Channel + CTCSS/DCS code.
Press the -button seven times : "SCAN" and "DCS
00" flashes on the display for the selected radio channel.
Press the -button or the -button to start the
DCS scan.
Press the - button eight times, “C” is displayed and
the current call tone is flashing.
Press the - button
or the - button to change to
another Call Tone.
Press the - button to confirm and return to stand-by
mode.
If you press the button while listening to a found CTCSS
code, the PMR will go back in stand-by mode on the channel with
the CTCSS code.
If no CTCSS code is detected there is a chance that DCS is
selected by the user. In this case you can scan for the DCS code.
(section 13.10.3)
PTT
12
7
11
10
If you press the button while listening to a found DCS code, the
PMR will go back in stand-by mode on the channel with the DCS code.
PTT
12
7
11
10
PTT
12
6
7
11
10
PTT
12
Press the -button twelve times,” DCM OFF" will
flash on the display.
Press the -button or the -button to change the
channel.
Press the -button to confirm the channel selection
and go to CTCSS selection. (Press the -button
again to go to DCS selection)
Press the -button or the -button to change
the CTCSS code or DCS code.
Press the -button to confirm and return to stand-by
mode.
To disable the function select "OFF" when selecting the
DCM channel.
PTT
12
7
11
10
PTT
12
7
11
10
PTT
12
7
11
10
7
7
11
10
PTT
12
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Topcom-Twintalker-9500

Zoeken resetten

  • Ik ontvang geen geluid op een toestel. Kanalen en subkanalen zijn dezelfde. En het rx komt op display maar erbij geen geluid? Gesteld op 2-1-2022 om 18:10

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Topcom Twintalker 9500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Topcom Twintalker 9500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info