719683
5
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
Instruction manual
5
USE
Connect both the parent unit and the baby unit to the provided
power adaptors or battery. Press the Power button . The power
LED will light up in green. Put the baby unit in the baby room and
putat 2m distance from the baby. Parents can hear the baby's
voice with the receiver. If the parent unit volume is too low, adjust
the volume. The volume LEDs indicate the sound level of the
baby.
Pairing
Under the normal conditions, the units are correctly paired by the
manufacturer. But in some cases it is necessary to pair the unit
again. You will have to do that if the parent unit (receiver) loses
the signal from the baby unit (transmitter).
First, turn on both baby and parent units.
Now press the pairing button at the side of both baby and parent
units simultaneously. After this, release the pairing button.
Battery Power
For both units, receiver and transmitter, use exclusively AAA size
1.5V alkaline batteries (6 pcs required, but not included).
Unscrew the screw of the battery compartment, take the lid off
and insert the batteries with the right polarity. Put the lid back,
screw in the screw and check that it is perfectly closed. Switch
the unit on and check that the power LED is on and in green.
Mains power
The Baby monitor can operate by batteries as well as by power
adaptors. Insert the power adaptor into an AC outlet. If your outlet
has a security switch, make sure it is on. Switch the unit on and
check that the power LED is on and in green.
When the battery becomes weak, the power LEDs of the units
turns red. Replace the batteries as soon as possible. For
extended use, it is advised to use a power adapter.
If the receiver is too far from transmitter, they won't work properly.
You will hear a beeping sound which is the out of range alert. The
volume LEDs will flash as well. In this case, you have to put the
two units nearer to each other. If the receiver is too close to the
transmitter, an acoustic feedback might be heard. In this case,
you have to put the two units farther away from each other, or
turn down the volume of the receiver.
A background noise from the receiver may indicate that the
batteries are running and they need to be replaced. Check if the
power LED is turning orange, this indicates that the batteries
need to be replaced.
If there is no sound in the baby unit's vicinity, the baby unit will
stop transmitting the signal to the parent unit. The parent unit is in
VOX mode (standby mode). When there is sound again from the
baby unit, it will trigger the parent unit to work again.
If you have a poor signal, please make sure the baby & parent
units are not out of range. In extreme cases, you can try to re-pair
the units.
CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth. Never use harsh and
abrasive cleaners, scouring pad or steel wool, which damages
the device.
Never immerse the electrical device in water or any other liquid.
The device is not dishwasher proof.
EN
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Topcom KS-4216 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Topcom KS-4216 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info