ASSEMBLY INSTRUCTIONS
Step 4
Connect the saddle (N-2) and the slider (N-
1) with three bolts and washers.
Attach the slider onto the top of the seat post
and the secure using the horizontal adjusting
knob (N-6) and one flat washer (N-5).
Step 5
Assemble the cables of the exercise
computer between the main frame and the
handlebar post as shown in the right sketch.
Follow the instructions below to assemble
the tension cable.
Pass through the handlebar post (C) from
the plastic cover (D-3).
Connect the computer cable up and down
cable (C-1 & D-1), connect the tension cable
up and down (C-2&D-2).
Fix the handlebar post to the main frame
after the above two steps. Fasten those four
screws and washers to fix the handlebar
post, move the plastic cover to right position.
Assemble the handlebar (B) to the bracket
on the handlebar post with two semicircular
washers (I-2) and screws (I-1).
6
