Handleiding Toolson AS1200PRO (pagina 13 van 100) (Alle talen)

782144

Verklein

Vergroot

Pagina terug

1/100

Pagina verder

13 І 100

right with at-head screws M 8 x 12 and screw nuts.

Fig. 4, 5

• Remove all screws and nuts form the housing.

• Attach the housing to the side coverings using at-

head screws M5 x 20 and screw nuts. Securely tighten

all nuts. Fig. 6

• Slide the clamp through the tabs on the lter bag and

x the lter bag on the container. Fig. 7

• Position the support bar into the housing and hang the

lter bag from it. Fig. 1

• Attach the shavings bag to the lower air ventilator us-

ing the clamp. Fig. 7

• Attach the exhaust hose to the nozzle on the housing

and afx it with a hose clamp. Fig. 8

• Attach the hose coupling to the other end of the hose

using a hose clamp. Fig. 9

The exhaust system should be cleaned every time the

shavings bag is changed.

Damaged lters and bags must be immediately changed

in order to keep the amount of dust that escapes into the

work environment as low as possible.

Initial operation

Note safety instructions before operation. The data on the

motor type plate (voltage and frequency) must conform to

the mains supply voltage and frequency. After connection

to the mains, the Dust Extractor is ready for operation.

Maintenance

m Warning! Prior to any adjustment, maintenance or

service work disconnect the mains power plug!

General maintenance measures

• Keep all safety devices, air vents and the motor hous-

ing free of dirt and dust as far as possible. Wipe the

equipment with a clean cloth or blow it down with com-

pressed air at low pressure.

• We recommend that you clean the equipment imme-

diately after you use it.

• Clean the equipment regularly with a damp cloth and

some soft soap. Do not use cleaning agents or sol-

vents; these may be aggressive to the plastic parts in

the equipment. Ensure that no water can get into the

interior of the equipment.

Storage

Store the device and its accessories in a dark, dry and

frost-proof place that is inaccessible to children. The

optimum storage temperature is between 5 and 30˚C.

Store the electrical tool in its original packaging.

Cover the electrical tool in order to protect it from dust

and moisture.

Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies with

the applicable VDE and DIN provisions.

The customer‘s mains connection as well as the

extension cable used must also comply with these

regulations.

• Given unfavorable conditions in the power supply the

product can cause the voltage to uctuate temporarily.

• The product is exclusively intended for use at con-

nection points that have a continuous current-carry-

ing capacity of at least 100 Amper phase.

• As the user, you are required to ensure, in consulta-

tion with your electric power company if necessary,

that the connection point at which you wish to ope-

rate the product meets the specied requirements.

• Have damaged switches replaced by a customer ser-

vice workshop.

• This electric tool complies with the pertinent safety

regulations. Repairs are to be carried out only by a

qualied electrician using original replacement parts

or the user may suffer an accident.

• If necessary, wear suitable personal protection equip-

ment. This could consist of:

- Ear-muffs to prevent the risk of damaging your hea-

ring

- A breathing mask to prevent the risk of inhaling ha-

zardous dust

• The operator has to be informed about the conditions

with an inuence on noise development.

• Faults on the machine have to be reported to the per-

son in charge as soon as they are discovered.

• This appliance is not suitable for the collection of dan-

gerous dust.

• This equipment is not designed to be used by people

(including children) with limited physical, sensory or

mental capacities or those with no experience and/

or knowledge unless they are supervised by a per-

son who is responsible for their safety or they have

received instructions from such a person in how to use

the equipment safely. Children must always be super-

vised in order to ensure that they do not play with the

equipment.

Technical Data

Motor 230 V /50 Hz

Motor speed 2850 min-1

Power P 550 W

Protection type IP20

Max. vacuum 1600 Pa

Max. extraction volumes 1150 m3/h

Extractor socket 100 mm

Sawdust bag volumes 75 l

Weight 20 kg

Noise emission values

sound pressure level LpA 75.5 dB(A)

sound power level LWA 95.5 dB(A)

The quoted values are emission values and not ne-

cessarily reliable workplace values. Although there is

a correlation between emission and immission levels

it is impossible to draw any certain conclusions as to

the need for additional precautions. Factors with a po-

tential inuence on the actual immission level at the

workplace include the duration of impact, the type of

room, and other sources of noise etc., e.g. the number

of machines and other neighboring operations. Reli-

able workplace values may also vary from country to

country. With this information the user should at least

be able to make a better assessment of the dangers

and risks involved.

Assembly

For packaging reasons your machine is delivered in

semi-assembled state.

• Attach the side covering loosely to the base frame us-

ing at-head screws M8 x 40 mm and screw nuts. Do

not tighten completely. Fig. 2, 3

• Attach the cross-member to the side covering left and

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Toolson AS1200PRO Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info