53
Programmable parameters
Subscribing/unsubscribing to the service center*
If a SMS from the fixed network should be received by your telephone system, it is necessary
to have the device registered at the service center of the network provider. In Germany, for
example, the nation-wide number of the service center of the Deutsche Telekom is "0193010".
This number has already been pre-set in the tiptel 340 clip, as well as the service center of
www.sms-im-festnetz.de, phone number "019001504" (SMS center 2).
The subscription process may vary according to the individual provider. Please contact your
network provider at this respect.
With regard to the provider Deutsche Telekom, for example, the single subscription is free-of-
charge *. Send a SMS with the following content:
"ANMELD" to the destination number 8888 (already pre-set in the tiptel 340 clip!).
Then, you receive a free confirmation of the subscription by the service center of Deutsche
Telekom. Now, it is possible to send and receive SMS by means of your tiptel 1/8 fax / 2/8 clip.
If the message "ABMELD" is sent to the destination number 8888, the subscription of your
phone number can be removed. All future SMS addressed to your phone number, will then be
available as voice mail.
* as per August 2002
Important, please note:
If you should not succeed in creating a connection to the service center during the subscription
process (the display shows "dialling ...", and then "No connection"), please check whether your
telephone access has generally been activated for the dialling of this special phone number.
For example, the service center of the Deutsche Telekom cannot be reached from the net-
works of other providers.
Many providers completely block the area code 0190-0. The consequence is that the service
center of www.sms-im-festnetz.de can neither be reached. In this case, please contact your
network provider who can activate the area code (maybe this service is chargeable).
Receiving short messages (SMS)
For each external line, it is possible to determine one access for incoming SMS. Aterminal unit
equipped for SMS communication can then be connected to this access. This device accepts
the incoming short messages.
An individual SMS device can be configured for each external line. Furthermore, it is neces-
sary to assign the CO-line access and the CO-line ring for the SMS connection to the relevant
external lines. Deactivate the call waiting function if only one terminal unit with SMS functio-
nality should be used for both external lines. Otherwise, it is possible that short messages
coming in via the other external line are not accepted in case the SMS terminal unit is busy.
