35
Programmable parameters
Extension 21 22 23 24 25 26 27 28 all
Access to CO line 1 On 211 212 213 214 215 216 217 218 210
Access to CO line 1 Off 221 222 223 224 225 226 227 228 220
Access to CO line 2 On 231 232 233 234 235 236 237 238 230
for tiptel 2/8 only
Access to CO line 2 Off 241 242 243 244 245 246 247 248 240
for tiptel 2/8 only
Automatic CO line access on / off
If the automatic CO line access is activated and the handset is picked up, an external
connection is immediately set up. By means of the "star"-key, it is possible to switch from
the external to an internal line within 3 seconds.
The automatic CO line access can be set for each telephone. The function is programmed at
telephone 21. The programming codes are indicated in the below-mentioned table. In the default
setting, the automatic CO line access is deactivated for all telephones.
Example: the automatic CO line access should be programmed for telephone 24
If the handset of telephone 24 is picked up, an external connection is immediately set up.
Telephone 21 22 23 24 25 26 27 28 all
Automatic CO line access on 371 372 373 374 375 376 377 378 370
Automatic CO line access off 381 382 383 384 385 386 387 388 380
1. Pick up the handset of telephone
21.
2. Enter the programming code
19999 .
3. Enter code 374 .
4. Replace the handset
You hear the telephone system’s dial tone.
You hear an acknowledgement signal.
As confirmation you hear an acknowledge-
ment signal.
Telephone 24 has automatic CO line
access.
