658771
12
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
P8
STARTING UP FOR THE FIRST TIME
the remote control to navigate forward or back through the wizard steps. Press the OK button to edit a
parameter and select its value from the drop list that will appear on the right side of the screen.
4.1 Menu Language and Tuner type
This is where you can set the menu language and select the tuner type. First select the language to be
used for all menus by pressing the tu buttons.
Select Streaming source if you want to use an external satellite tuner as SAT-IP server. The most common
way is to confirm the setting Local tuner.
Press the GREEN button on the remote control to proceed to Antenna settings.
4.2 Antenna Settings
Satellites 1 – 4: To set up the receiver for the type of connected antenna, follow the instructions
below. Select the satellites you wish to receive with the receiver. Each of the
satellites in the built-in satellite list is configured with predefined default
parameters. You may press the BLUE button to edit these values. See below
details for advanced settings. In case you use Astra 19.2 satellites, skip these steps
and press the GREEN button (continue reading chapter 4.4 Channel Search).
4.3 Advanced Satellite Settings
LNB Type: Select Universal for most standard LNBs or Unicable if you have a Unicable SatCR
LNB or multiswitch.
Satellite: Use this option to select the satellite for which you would like to set the position.
Use the COLOUR BUTTONS on the remote control, as shown at the bottom of
the screen, to delete or add a satellite from the satellite list and set their individual
settings.
LOF Low and High Band: The LOF (Local Oscillator Frequency) of the LNB is usually printed on the LNB itself
or in its documentation. You can set the High and Low LOF frequencies to match
the LNB here.
Band switching: The receiver uses a 22 kHz signal to control the band of the LNB. If you do not
know if your LNB supports this feature, set the option to Auto.
DiSEqC type and DiSEqC input:
You can connect up to two cascadable DiSEqC switches to the receiver. This
option allows you to set the type and input port for each switch.
Reference transponder: This option allows you to set which transponder is used as the reference for the
satellite signal strength.
Transponder number: Use this option to select a transponder from the built-in transponder list. Once
selected from the list, the Frequency, Polarity and Symbol rate fields will be updated
accordingly. Alternatively you can set these fields manually.
Frequency: Set the frequency of the reference transponder.
Polarity: Set the polarity of the reference transponder.
Symbol rate: Set the symbol rate of the reference transponder.
Tuner IF and Channel ID (SatCR only):
This option allows you to select the SatCR Tuner IF frequency (also known as User
Band frequency) and the channel ID for the receiver. In a typical SatCR installation,
you are able to connect multiple receivers to a single LNB or Multiswitch output,
with each receiver set to connect to a different SatCR user band and channel ID.
Signal strength and signal quality bars:
In two level bar meters, on the right side of the screen, the user can see the
strength and quality of the signal coming from the antenna dish to the tuners.
These two meters can be used while doing a fine-tuning of the antenna position.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thomson THS 845 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thomson THS 845 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info