- EN 4 -
Basic operation
Powering ON/OFF
• Your speaker will power up automatically when you connect the AC adaptor to the AC input on the
rear.
You can still switch off the Wi-Fi mode by pressing the power \ mode button (1) for 2 secs. The Wi-Fi
indicator will turn off and Wi-Fi streaming will cease.
Use a quick press to select between Wi-Fi and Aux in mode if an aux cable is connected.
Setting the time
Your clock should automatically set to the correct time once you have connected to the internet, but if
you need to manually set the time, follow these steps.
• Short press on the time set button (5) and the hour LEDs will start to ash.
• Press the time forward or back buttons (2) and (3) to increase or decrease the hours.
• Press the time set button again to change to minutes and then press the time forward and back
buttons again to increase or decrease the minutes.
• Press the time set button a nal time to complete the time setting.
Note: DO NOT press and hold this button for more than 5 seconds as this will trigger the set-up
procedure again.
Alarm Setting
• Press and hold the Alarm set 1 or Alarm set 2 buttons (6) and (7) to set an alarm time.
• The alarm icon will light up to indicate which alarm is being set and the hour LEDs will start to ash.
• Press the time forward or back buttons (2) and (3) to increase or decrease the hours.
• Press the alarm set button again (6) or (7) to change to minutes and then press the time forward and
back buttons again to increase or decrease the minutes.
• Press the alarm set button a nal time to complete the alarm setting.
• The alarm buzzer will slowly get louder to wake you up.
• Press and hold the alarm button to check what alarm times you have set and to switch them on and
off. The alarm time will appear and the Alarm icon will be on of off to indicate that the alarm is set
to on or off.
Snooze
• Simply tap the Snooze button to temporarily stop the alarm buzzer.
• Press the alarm button to fully stop the buzzer.
Clock dimmer
• A short press on the Alarm 2 button (7) will decrease the brightness of the LED display.
• A short press on the Alarm 1 button (6) will increase the brightness of the LED display.
Volume control
• Rotate the volume control wheel to increase or decrease the volume.
Tap to talk and mute
• Press the ‘Tap to Talk’ button to instantly give a command to Alexa without having to use the ‘Alexa’
wake word.
• Press the Alexa mute button to stop Alexa from listening. The Light ring will light up red to indicate
that it is muted. This light ring will dim after 10 seconds so it is less intrusive at night.
Phone Charging
Use the wireless charging area on the top of your speaker to charge your mobile device. ( Must be a
wireless compatible model)
Use the USB port with your standard charging cable as an alternative charging option. (5V 1A only)
