- 19 -
Telephone Operations
Make a Phone Call
(1) Press <TALK ON> button. You will hear the dial tone.
(2) Enter the desired telephone number to make a call.
(3) Press the <TALK OFF> button when you want to terminate the call.
or
(1) Enter the desired telephone number.
(2) Press the <TALK ON> button. The number will be dialled automatically.
(3) Press the <TALK OFF> button when you want to terminate the call.
NOTE: When you haven’t pressed a button for 10 seconds, the number you’ve already entered
will disappear and the handset returns to standby mode.
Make a Phone Call from Redial List
(1) Press <TALK ON> button. You will hear the dial tone.
(2) Press the key. The number you last called is dialed automatically.
or
(1) Press the button. The number you last called appears on the display.
(2) Press the <▲> or <▼> button to select the desired number you want to dial out.
(3) Press the <TALK ON> button, the number shown on the display is dialed automatically.
(4) After finishing your call, press the <TALK OFF> button to hang up.
Answering an Incoming Calls
(1) When a call comes in, the handset will start to ring.
(2) Press the <TALK ON> button to answer the incoming call.
Handsfree Function
(1) When you are on the phone, press the key to activate the hands-free function.
(2) Press the same button to deactivate the hands-free function.
Mute Function
During a call, press to switch Mute on/off. When on, you voice will be muted so your
caller cannot hear you.
(1) Press the button during a conversation. The microphone will be deactivated. The
[MUTE ON] icon appears on the display.
(2) Press the <MUTE> button again when you want to continue the conversation.
Adjusting the Ringer Volume
During a conversation you can set the volume alternatively in between (1 to 5):
(1) Press button once, the volume will increase one level up
(2) After reach max volume, if press the button once again, the volume will go back to min level
When you are calling in Handsfree mode and you want to change the volume, it is same as step
1 and 2.
Setting the Pause
If you wish to insert a pause, press the button on the location where you want a pause of 3
seconds.
