- 15 -
Set Zero Emission (NEMO)
For DECT system, the base unit should always keep sending a beacon signal to handset unit to
make sure its existence. So that it can guarantee base unit can immediately connect to handset
unit whenever ring come. This beacon signal is a 1V/m 1.8GHz RF power with 0.5ms for every
10ms. This DECT phone is equipped with a NEMo (No Emission Mode) feature to make real no
emission and still can achieve immediate reaction. In other word, when handset in stand-by
status, the base unit is no RF emission.
To set the handset to normal DECT system or Zero Emission
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [NEMO] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
Note: It has a drawback on NEMO mode that the handset cannot detect out of range at stand-by
status.
Restoring the Default Base Setting
You can restore the factory settings for the telephone base at any time.
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [BS DEFAULT] and press <OK>.
(4) Enter the PIN code and press <OK>
Handset settings
Alarm Function
You can use handset as an alarm clock to wake you up by defined time.
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [ALARM] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
(5) Use the <▲> or <▼> button to enter hours in 24 hour format and press <OK>.
(6) Use the <▲> or <▼> button to enter minutes and press <OK>.
(7) Use the <▲> or <▼> button to turns snooze on or off and press <OK>.
Handset Ringer Tone
Set External Call Ring Tone
You can change the ringer tone for an incoming call (external).
(1) Press <MENU> button or press and hold button for 3 seconds.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [RING SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [EXT RING] and press <OK>.
(5) Select the ringer tone you want, and then press <OK>.
Set Intercom Ring Tone
You can change the ringer tone for Intercom call (internal).
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.