485818
23
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
23
Cleaning hard floors (steam vacuuming)
Using the 4-
S cleaning nozzle you can clean and dry your ceramic/
stone/plastic flooring in one operation, making effective use of the steam’s
energy, saving water and power and doing the job in an environmentally-
friendly manner. You can carry out thorough, high-quality cleaning without
using chemical cleaning agents.
P Fit the carpet spray-jet (39) onto the 4-S cleaning nozzle (40). Lock the
holding-clip (80) in position on the connecting-pin of the carpet spray-jet
(39).
Now fit the steam connector (50) to the steam connection point (41) on
the 4-S cleaning nozzle and lock the nozzle into position by turning in
the direction of the arrow.
M Pull mains plug (78) out of the appliance and connect to mains.
N Switch on the appliance at the master ON/OFF switch (16). The yellow
indicator lamp (12) signals that the appliance is ready for use.
Switch on the steam boiler heater at switch (15). The integrated indicator
lamp must now light up.
The heating time is approx. 7 minutes. The green indicator lamp (14)
signals that the appliance is ready for steam operations.
Please note!
In spraying mode (as in steam vacuuming mode), the speed control function
is not active. The appliance operates automatically at maximum power, to
ensure optimum vacuuming of the soiled water.
Please ensure that, when the appliance is set to vacuum only, the vacuum
regulator is set at maximum.
O
You can begin cleaning by pressing the button (30) on the handle; steam
will then be emitted from the nozzle.
In order to extract the loosened dirt, switch on the suction function by
pressing the button (29).
The functions can be switched on and off as required by repeatedly
pressing buttons (29) and (30).
N You can set the desired quantity of steam with the steam regulator (9).
The maximum steam quantity is recommended when cleaning hard floors
and smooth surfaces.
Q During breaks in work, you can place the 4-S cleaning nozzle (40) in the
collecting dish (21) (according to machine type), in order to collect any
residual liquid which may flow out of the suction tube and the nozzle
system.
Remove the nozzle again by placing one foot on the clip which protrudes
from the collecting dish (21) and pulling out the suction tube with the 4-S
cleaning nozzle.
Please note!
The use of the cleaning cloth (43, Fig.
P ) is not recommended in steam
vacuuming mode or in cleaning-vacuuming mode.
Cleaning smooth surfaces
The steam vacuuming nozzle (66) is used to clean smooth surfaces, such as
windows and other glass surfaces, mirrors and wall tiles.
Please note!
In order to prevent stress in glass surfaces (possibly leading to bursting), you
should steam over the entire surface of the glass surfaces to be cleaned
(particularly when low outdoor temperatures apply), in order to balance out
temperature differences.
U
You can fit this nozzle directly onto the handle (32) or to the suction
tube (52), as required.
When using the suction tube, fit the steam connector (50) to the steam
connection point (67) on the steam vacuuming nozzle (66) and lock the
nozzle into position by turning in the direction of the arrow.
If the steam vacuuming nozzle (66) is fitted directly onto the handle,
use the adapter (62). Connect the plug (64) to the socket coupler (31) on
the handle. Now fit the steam coupler (63) to the steam connector (67)
on the steam vacuuming nozzle (66) and lock this nozzle into position by
turning in the direction of the arrow.
For further procedure, please see 'Cleaning hard floors'
from
M .
Replenishing the water in the steam boiler
See Section 6.4.
Emptying the soiled-water tank
Please note!
To avoid automatic shut-down of the appliance, please empty the soiled-
water container when two complete fillings of the steam boiler have been
used up.
See Section 5.2.
6.3 Cleaning hard floors, cleaning-vacuuming (steaming,
spraying, vacuuming)
The term 'cleaning-vacuuming' refers to a combination of "spray
extraction" (Section 5.2) and "Steam vacuuming" (Section
6.2), and is particularly suitable for removing stubborn dirt when cleaning
hard floors, when the applied quantity of water applied in the steam is not
sufficient on its own to attain good cleaning results.
The energy of the steam detaches the dirt and the cleaning agent solution
binds the dirt, which is subsequently extracted into the soiled-water tank.
Revolutionary innovation, unique throughout the world
The formula for successful cleaning, according to the degree of soiling:
Steaming + spraying + scrubbing + vacuuming = cleaning
Please note!
In cleaning-vacuuming mode, work with the 4-S cleaning nozzle only and
ensure that both the steam connector (50) and the spraying nozzle (49) are
fitted.
Depending on the individual application and the degree of soiling, you can
use the Pro Floor cleaning concentrate or simply fill the fresh water
tank with hand-warm tap water.
O
In cleaning-vacuuming mode, the functions spraying (button 28), steaming
(button 30) and vacuuming (button 29) can be combined on the handle
as required, and operated on their own or in combination:
steaming + vacuuming = buttons 30 + 29
spraying + vacuuming = buttons 28 + 29
steaming, spraying + vacuuming = buttons 30 + 28 + 29
Please note!
The use of the cleaning cloth (23, Fig.
P ) is not recommendable in steam
vacuuming mode or in cleaning-vacuuming mode.
Degree of
soiling: light medium heavy
steaming +
vacuuming
steaming +
spraying +
vacuuming
steaming +
spraying +
scrubbing +
vacuuming
and
away!
Saugrohr
Druckleitung und Reinigungsmittel
Druckleitung Dampf
Absaugen
Arbeitsrichtung
Sprühsystem
Wasserdampf
Lösen, Binden und Absaugen
The cleaning-vacuuming system/
Combined operating mode
Dirt is loosened using the energy of the steam.
The dirt is bound with the cleaning agent solution
(spraying system).
The soiled water is extracted at
high power.
All in one operation.
Pressure pipe and cleaning agent
Loosening, binding and extraction
Steam
Working direction
Spraying system
Extraction
Suction tube
Pressure pipe for steam
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thomas SYNTHO V 1500 AQUAFILTER bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thomas SYNTHO V 1500 AQUAFILTER in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info