641132
10
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
Owner’s Manual 10
Automatic mode operation:
When the refrigerator is in AUTO mode, the electronic controls of the refrigerator automatically select and use the most efcient energy
source that is available for operation.
During operation, if a more efcient energy source becomes available, the electronic controls of the refrigerator automatically changes
from the current energy source to the more efcient energy source as follows:
- The rst choice of operation is AC electric mode.
- If AC electric is not available to the refrigerator, if the AC electric is outside of the permitted operating range, or if the AC heater
does not operate; the electronic controls of the refrigerator automatically change to the second choice of operation.
- The second choice of operation is gas mode.
- The refrigerator attempts to operate the propane gas burner. If unable to establish and maintain a ame, a “no” FL” fault code
shows on the LCD. Refer to “Fault Codes” section of this manual.
Removing air from the propane gas supply lines:
For safety reasons, the burner is made to ignite on propane gas within a specied amount of time. When starting the refrigerator for the
rst time, after storage, or after replacing the propane gas tank, the propane gas supply lines can have air in them. Due to the air in the
gas supply lines, the refrigerator may not ignite on propane gas within the specied amount of time.
To remove the air from the propane gas supply lines:
- Make sure that all of the gas valves are open.
- Push and release the POWER ON/OFF button [30] to turn on the refrigerator.
- Push and hold the MODE button [31] until the Manual mode gas indicator [284] is on.
- Push and release the TEMPERATURE SET button until the desired temperature setting shows.
- The refrigerator will start a 30 second trial for ignition.
- During the 30 second trial for ignition, the refrigerator controls open the gas safety valve and the igniter sparks.
- After 30 seconds, if the Manual mode gas indicator remains on, it means that the refrigerator is operating on propane gas.
- At this time, all of the air is removed from the propane gas supply lines and you may select AUTO mode of operation if
you wish.
- If the gas does not ignite within 30 seconds, the gas valve of the refrigerator will automatically close and a “no” “FL” fault code
will show in the LCD. To reset the controls, press and hold the POWER ON/OFF button for 1 second to turn the refrigerator
off, then press it again to restart the refrigerator and begin another 30 second trial for ignition.
- Depending on how much air may be in the propane gas supply lines, you may need to repeat the 30 second trial for
ignition two or three times.
- If the burner does not ignite on propane gas after two or three attempts, stop and consult your local dealer or an
authorized Norcold Service Center.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thetford 2118 PolarMax bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thetford 2118 PolarMax in de taal/talen: Engels als bijlage per email.

De handleiding is 6,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Thetford 2118 PolarMax

Thetford 2118 PolarMax Aanvulling / aanpassing - English - 18 pagina's

Thetford 2118 PolarMax Installatiehandleiding - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info