814116
24
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Page 23
Installation, use and maintenance guide
POPSTAR 6 POPSTAR 10
8 - CLEANING AND MAINTENANCE
8.1 FOREWORD
Before beginning any maintenance operation ensure that the appliance is switched OFF and disconnected from the
electric power socket. Your appliance, being a pellet-fuelled appliance, requires regular general controls and cleaning.
This will guarantee regular operation and optimal output at all times. If the product is unused for a prolonged period of
time before starting up it is mandatory to inspect the smoke channel and outlet to ensure that there are no obstructions.
It is important to carefully follow the instructions set out below: failure to observe these instructions could cause serious
damage to the product, to objects and to persons using the appliance.
Attention: do not wet the appliance and do not touch the electrical parts with wet hands. Never vacuum hot ash: this
could damage the vacuum device. All the cleaning operations described in this manual must be carried out when the
appliance is cold.
The user must periodically clean the appliance, or have an authorised service centre clean it, as described in
this manual. Moreover, once a year it is advisable to have an inspection carried out of the functionality of the
flue outlet.
8.2 CLEANING AND MAINTENANCE
Due to the frequent cases, we have encountered of the use of poor-quality pellets, users are advised that it is
mandatory to use, in this appliance, pellets certified in accordance with the regulations in force for the Italy UNI market
or for the European EN market. If this requirement is not observed the result will be unsuitable combustion,
consequently, the electrical and mechanical components could be subjected to very high temperatures and will not be
covered by warranty.
Unless otherwise instructed, the operations described below are mandatory and not postponable beyond the
specified times.
EVERY DAY:
Remove the ash pan and the brazier assembly by pulling them outwards. Clean out all the combustion residues from the brazier
and the compartment A1 (Figures 1, 2 and 3) then return the brazier and the Pellet Power to their positions. To open and close
the door use the special handle provided. To guarantee correct operation of the appliance, carefully clean the area around the
spark plug.
ATTENTION: make sure, before every start up, that the brazier is clean and in the correct position. If necessary clean the burner
more thoroughly using an ash vacuum device.
EVERY 3 DAYS:
Check that the holes of the burner and the heater lodging channels are completely sediment-free. If necessary, vacuum and
clean (Figure 1, 2 and 3). Remove, if present, all silica agglomerates; they indicate poor quality fuel.
Empty the ash from the pan (Figure 1)
Lift and drop the tube scraper rods several times using the special handle provided (figure 4).
EVERY 7 DAYS:
Inspect and clean the opening indicated as C1 (Figure 6). To access it, unscrew the 4 knobs indicated in Figure 5. Before
reassembling the door, check the condition of the seal, and if worn replace it.
EVERY MONTH:
Remove the back of the combustion chamber (figure 7, 8, 9) by lifting it and rotating it outwards and clean the tubes and smoke
passages thoroughly. Special attention must be given to the points indicated by the arrows.
Inspect and clean the Tee-joint of the smoke exhaust pipe. To access it, unscrew the two knobs indicated in Figure 10, remove
the bracket and thoroughly clean the cavity C2 indicated in figure 11.
Vacuum, when empty, the saw dust on the bottom of the pellet tank.
Check that the smoke exhaust pipe is free from any ash deposits, above all in the initial parts that could have a smaller section.
AT LEAST TWICE A YEAR:
• Clean the flue outlet. If there are any horizontal sections, inspect them and clean out any ash and soot deposits before they block
the passage of the flue gases.
AT THE END OF THE WINTER SEASON (or whenever necessary)
• Carry out a thorough cleaning of the complete firebox and the various compartments of the appliance, using brushes and vacuum
cleaner.
A vacuum device simplifies the ash removal procedure. The front and side casings must be cleaned when the heater
is cold using a soft cloth and water. It is also normal to find partially or totally unburned pellets in the ash pan. When
the combustion chamber door is opened it is normal for the ash to drop to the floor.
ATTENTION: after cleaning it is mandatory to carefully check that the combustion chamber door is firmly closed and
airtight.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermorossi Popstar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermorossi Popstar in de taal/talen: Engels als bijlage per email.

De handleiding is 3.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Thermorossi Popstar

Thermorossi Popstar Gebruiksaanwijzing - Deutsch - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info