4.4 INTALLATION OF CRISTALLO CASING
To install the CRISTALLO casing proceed as follows:
1) Use pliers to remove only the two middle pre-drilled fasteners indicated with the letter (A).
2) Pull the tabs indicated with the letter (B) outwards, in order to secure the side panel firmly in place.
3) Insert the side panel as indicated in the figure. If it is not sufficiently fastened to the appliance, remove it and pull out even
further the tabs indicated with the letter (B). Next proceed to install the opposite side panel.
4) Seal the upper glass elements with high temperature silicone taking care to position them correctly, as indicated in the figure.
5) Remove the profile (F), after undoing the three screws (G), and insert the lower panel (E).
6) Then return the previously removed profile (F) to its place.
7) Adjust the upper and lower pin (D) and the lower and upper tabs (C) to firmly secure the panel to the appliance.