607255
21
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
Page.3
ASSEMBLY INSTRUCTIONS FOR THE DECORATIVE WINDOW
Note !
Before you begin to remove and disassemble the Decorative window, we advise you to en-
sure that you have an ample and safe working area with a stable and soft surface.
During these working activities do not allow yourself to become distracted, for example, by
attention seeking children or other preventable situations. Do this in order to guarantee your
own safety and that of others and to ensure that the window is not broken or damaged. Be-
cause the Decorative window is rather heavy, it is advisable to remove the window from the
fire with two persons.
1. Disassembling the Decorative window ( See Fig. )
Behind the Decorative window, on the lower left-hand and right-hand
sides of the fire, 2 shoulder bolts are mounted to secure the Decorative
window. (See arrow).
· Remove these bolts manually or using a screwdriver.
· Lift the Decorative window out of the positioning projections on
the upper surface of the fire and lay it in the working area you have
chosen ( for example a stable surface ) with the front facing down-
ward. ( See Page 5 fig. 2 )
· Remove the 3 M6 bodywork rings and the 9 M5 flat nuts
(See Page 5 fig.3 Pos. 8 and 9)
· Remove the support brackets. ( See Page 6 fig. 4 pos. 5 and 6 )
· Lift the contra window out the mountings and place this in a safe spot. ( See Page 6 fig.
5 Pos. 4 ) Note: Ensure that the rough side of the window is not damaged or that finger
marks, etc. occur through handling or other causes. When the windows are re-fitted,
the rough sides of both windows must face each other. After this, you will no longer be
able to clean the windows.
· Remove the screening plate. ( See Page. 7 fig. 6 Pos 3 ) Treat this plate with the same
care as the windows.
· Take the 9 10x9 fitted sleeves out the sittings and keep these with the rest of the fixing
material. ( See Page 7 fig. 7 Pos 7 )
· If this is necessary, you can now remove the Front decorative plate from the decorative
frame. ( See Page 8 fig. 8 Pos. 1 and 2 ) Treat this window with the same care as the
contra window.
2. Mounting the Decorative window
Mount the Decorative window in the reverse order, paying attention to the placing of the
windows.
The smooth sides must be positioned on the outside.
The rough side may not be on the outside.
In addition, please refer to the Operating and Installation Instructions
for the Flat Fire line.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermocet Flat Fire M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermocet Flat Fire M in de taal/talen: Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info