782626
12
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
8
2.3. Pipe connection.
A· pipe installation:
Before installation, carefully clean the residues and dirt in all the pipes to avoid
aecting the normal operation of the boiler.
According to the the graphic of 4.1 section and the corresponding symbols on the
bottom plate to connect pipe.
The outlet of the relief valve must be connected to the floor drain or drain, so that the
water will not flow to the ground when the heating system overpressures. Otherwise,
the wall manufacturer will not be responsible if the leakage pressure causes the
room to be flooded.
In the heating system of the thermostatic valve, the water circulation may be
completely stopped. In this case--the bypass flow is passed through a device that
does not have any thermostatic valves, or used --by-pass.
B.Water quality characteristics of water system:
When the water hardness more than 25 ° Fr, should use the softening treatment of
water, avoid boiler internal water hardness or corruption and scaling. It should be
noted that even a few millimeters of scale can lead to low thermal conductivity and
cause serious problems caused by overheating of boiler.
If the system is very large (large capacity of water) or frequent filling water into the
system, must be to deal with water, if must be part of the drain or completely
emptying system, water injection is the treated water must be used.
C. antifreeze system, antifreeze, additives or inhibitors.
Boiler has anti-freezing function, when the heating system water temperature is less
than 6 ° C, boiler will start heating mode.
If the power supply of the boiler is cut o, the anti-freeze function fails.
If necessary, can use antifreeze, additives or inhibitors, but these fluid
manufacturers must ensure that the liquid medicine, without damaging the wall
hanging furnace heat exchangers and other parts, no damage to the heating
equipment. The use of antifreeze, additives and inhibitors not specied for heating
equipment and wall hanging furnaces is prohibited.
Filters and settler collectors should be regularly checked and cleaned.
Before adding water to the heating system, it is necessary to check the pressure of the
expansion tank. If necessary, it should be filled with pressure in the range of 1-1.3bar.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermex Eurostar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermex Eurostar in de taal/talen: Engels als bijlage per email.

De handleiding is 1.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info