76
6.4 Manual ON (override switching)
Each channel can be switched ON manually in the automatic program. In which
case, the symbol H = hand appears in the display.
An override switching is cancelled again by the next switching command. The H
display is turned off.
Select Channel: e.g. Button 1 = Channel C1, Button 2 = Channel C2 etc.
Select Status: Button 1 = Switch ON, Button 0 = Switch OFF
Example: Switch ON Channel C2 manually, press button 2, once (press 1).
Channel 2
ON
6.5 Manual OFF (override switching)
Each channel can be switched OFF manually in the automatic program.An overri-
de switching in the automatic program is corrected again by the next switching
command. (The H symbol is turned off).
Select Channel: e.g. Button 1 = Channel C1, Button 2 = Channel C2 etc.
Select Status: Button 1 = Switch ON, Button CL (reset channel) = Switch OFF
Example: Switch OFF Channel C2 manually, Button 2, press.
Auto Auto
Auto Auto
Channel 2
OFF
6.6 Locking/ unlocking the keyboard
Effect:
The
Obelisk memory card allows you to prevent operation of the device by unaut-
horized persons.
In this case time switch query and programming are impossible without the
Obelisk card.
Locking the keyboard:
1. Insert the Obelisk memory card into the data interface.
2. Press key 8 for approx. 3 secs until the Obelisk icon is flashing.
Operating the time switch
If after a button is pressed and the Symbol is blinking, the keyboard is locked.
1. Insert the Obelisk memory card into the data interface.
2. You can the select the desired program using the v key.
3. Now you can remove the memory card in order to continue programming.
When the time switch returns to auto mode, the keyboard is locked.
Canceling the keyboard lock
1. Insert the memory card into the data interface.
2. Press key 8 until the icon appears.
3. Press key 8 for approx. 3 secs until the icon disappears.
4. Remove the memory card.
Now the time switch can be operated again without obstruction.
