Operating voltage: Bus voltage
Current consumption (bus): max. 10 mA
Permissible ambient temperature: –5 °C to +45 °C
Protection class: III in accordance with
EN 60730-1
Protection rating: IP 20 in accordance with
EN 60529
If output is configured for LED: Low current 1 mA
(LED 1 mA types)
Max. line length: 5 m
Max. connection cross-section:
– single wire (fixed) 1.5 mm
2
– fine strand (flexible) 1.0 mm
2
– fine strand with wire end sleeve 0.5 mm
2
Housing: 74 x 74 x 28 mm
10.
Technical data
Observe deviating technical data on the rating plate! Technical
changes reserved. The devices comply with European Directives
73/23/EEC (low-voltage directives) and 89/336/EEC (EMC
Directives).
If the devices are combined with others for use within a system,
ensure that the system as a whole does not cause radio interfe-
rence.
The ETS database can be found under www.theben.de
Please refer to the Handbook for detailed functional descriptions.
Please refer to the Product Handbook for detailed functional des-
criptions (also at www.theben.de).
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Phone +49 (0) 74 74/6 92 0
Fax +49 (0) 74 74/6 92-150
Service
Phone +49 (0) 74 74/6 92 369
Fax +49 (0) 74 74/6 92-207
hotline@theben.de
Addresses, telephone numbers etc. at
www.theben.de
9.
Start-up
Start-up, diagnostics and configuration are handled by ETS (KNX
Tool Software).
1
2
8.
Programming physical address
1. Open housing cover.
2.
Press the programming button (1) with a screwdriver.
the programming LED (2) lights up.
RAMSES 712 is in programming mode
The temperature sensor attached to the circuit board can be
replaced by an external sensor (907 0 321) (e. g. for underfloor
heating).
7.
Connecting external sensor
Low current LED connections
