Operating voltage: Bus voltage
Current consumption KNX: max. 12 mA
Bus interface module (BCU): integrated
Permissible ambient temperature: –5 °C to +45 °C
Protection class: III
Protection rating: IP 20 in accordance with
EN 60529
Equipment standard: in accordance with
EN 60730-1
Housing: 74 x 74 x 28 mm
9.
Technical data
Observe deviating technical data on the rating plate! Technical
changes reserved. The devices comply with European Directives
73/23/EEC (low-voltage directives) and 89/336/EEC (EMC
Directives).
If the devices are combined with others for use within a system,
ensure that the system as a whole does not cause radio interfe-
rence.
The ETS database can be found under www.theben.de
Please refer to the Handbook for detailed functional descriptions.
Please refer to the Product Handbook for detailed functional des-
criptions (also at www.theben.de).
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Phone +49 (0) 74 74/6 92 0
Fax +49 (0) 74 74/6 92-150
Service
Phone +49 (0) 74 74/6 92 -369
Fax +49 (0) 74 74/6 92-207
hotline@theben.de
Addresses, telephone numbers etc. at
www.theben.de
7.
Programming physical address
8.
Start-up
1. Press the program button (2) with a screwdriver through the
openings at the bottom of the device.
Programming LED (1) lights up.
AMUN 716 is in programming mode.
Start-up, diagnostics and configuration are handled by ETS
(KNX Tool Software).
Bus terminal and bus line
1. Open the housing cover with a screwdriver at the 4 side
lugs and feed the bus line from below through the opening.
2. Plug bus line into bus terminals.
Ensure correct polarity.
3. Close housing cover.
6.
Bus connection
Don´t touch the membrane
while mounting the device
1
2
