(F), wie in der Abbildung oben dargestellt. Ziehen Sie die Schrauben von Hand
an.
obigen Abbildung gezeigt. Ziehen Sie die Schrauben von Hand an.
STORAGE
• When not in use, and if stored outside, cover the Kamado once completely cooled with a suitable rain cover.
• The chrome plated cooking grill is NOT dishwasher safe; use a mild detergent with warm water.
• When using the Kamado push down on both of the locking wheels to stop the unit moving about during use.
• It is recommended the Kamado be stored under cover in a garage or shed over winter for complete protection.
CLEANING
• The Kamado is self cleaning. Heat it up to 260ºC for 30 minutes and it will scorch off all of the food and debris.
• DO NOT use water or any other types of cleaning product to clean the inside of your Kamado. The walls are
porous and will absorb any fluids used, this could cause the Kamado to crack. If the soot becomes excessive
then use a wire brush or the ash tool (not supplied) to scrape off the carbon remnants before the next use.
• To clean the grills and grates use a non-abrasive cleaner once the unit has fully cooled.
• To clean the outer surface wait until the Kamado is cool and use a damp cloth with a mild detergent.
MAINTENANCE
• Tighten the bands and oil the hinge 2 times a year or more if needed.
LIGHTING, USAGE AND CARE INFORMATION
• Ensure the Kamado is positioned on a permanent, flat, level, heat resistant non-flammable surface away
from flammable items.
• Ensure the Kamado has a minimum of 2m overhead clearance and has a minimum 2m clearance from
other surrounding items.
• To start a fire place rolled up newspaper with some lighter cubes or solid firelighters on the charcoal plate (7)
in the base of the Kamado. Then place 2 or 3 handfuls of lump charcoal over the top of the newspaper.
• DO NOT use petrol, white spirit, lighter fluid, alcohol or other similar chemicals for lighting or relighting.
• Open the bottom vent and light the newpaper using a long nosed lighter or safety matches. Once it has
caught, leave the bottom vent and lid open for about 10 minutes to build a small bed of hot embers.
• Allow the charcoal to heat up and be kept red hot for at least 30 minutes prior to the first cooking on the
kamado. DO NOT cook before the fuel has a coating of ash.
• It is recommended you don’t stoke or turn the coals once they are alight. This allows the charcoals to burn
more uniformly and efficiently.
• Once alight ONLY use heat resistant gloves when handling hot ceramics or cooking surfaces.
• See below for cooking instuctions depending on temperature and duration.
LOW TEMPERATURE COOKING GUIDE
• Light the lump charcoal according to the the instructions above. DO NOT move or stoke the coals once lit.
• Open the bottom vent fully and leave the lid open for about 10 minutes to build a small bed of hot embers.
• Monitor the Kamado until it has risen to the desired temperature. See page 4 for a temperature cooking guide.
• Fully close the bottom vent to maintain the temperature.
• You are now ready to use the Kamado for cooking on.
• IMPORTANT: When opening the lid at high temperatures it is essential to lift the lid only slightly, allowing air
to enter slowly and safely, preventing any backdraft or flare-ups that may cause injury.
• ALWAYS follow the FOOD COOKING INFORMATION stated on page 4 of this instruction manual.
• ALWAYS use heat resistant gloves when handling hot ceramics or cooking surfaces.
SMOKING GUIDE
• Follow the instructions above as if you were starting a slow cook.
• Monitor the Kamado until it has risen to the desired temperature. See page 4 for a temperature cooking guide.
• Leave the bottom vent slightly open.
• Close the top vent and continue to check the temperature for a few more minutes.
• Using heat resistant gloves sprinkle the wood chips in a circle over the hot charcoal.
• You are now ready to use the Kamado to smoke on.
• TIP: Soak your wood chips or cooking planks in water for 15 minutes to prolong the smoking process.
• IMPORTANT: When opening the lid at high temperatures it is essential to lift the lid only slightly, allowing air
to enter slowly and safely, preventing any backdraft or flare-ups that may cause injury.
• ALWAYS follow the FOOD COOKING INFORMATION stated on page 4 of this instruction manual.
• ALWAYS use heat resistant gloves when handling hot ceramics or cooking surfaces.
5
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
Ensure that the lid is closed prior to assembly.
Assemblyinstructions
Partslist
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
components of the Kamado Grill.
Prior to assembly, read the instructions carefully. Check all parts against the parts list.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
7 (2x)
8 (2x)
10
(1x)
11 (1x)
12 (1x)
14 (2x)
(1x)
16 (1x)
17 (2x)
(2x)
9(1x)
(1x)
13
18
(2x)
19
15
1 (4x)
2 (1x)
3 (1x)
4 (1x)
5 (1x)
6 (4x)
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
Ensure that the lid is closed prior to assembly.
STEP 1 -
Position the parts on a flat surface that will not scratch the finish of the nest components, paying close
attention to the joint overlap in illustration the 2pcs Upper cross brace(4&5) and 2pcs Lorer cross brace(2&3).
Using the given hardware and hand tighten the braces with screw A + nut F.
6
Assemblyinstructions
Assemblyinstructions
STEP 2 -
STEP 3 -
STEP 4 -
STEP 5 -
STEP 6 -
STEP 7 -
(Joining the two halves assembled in step l) Stand the section 1 upright, and place the upper cross
braces (4&5) close to section 1. Inserting truss head screw C through the hole of section1
and section 4&5 and install K Keps nut and tighten securely.
(Installing the lower cross braces and casters) Place the assembled lower cross braces (2&3) under section 1,
Stand the section 6 upright to make it close to section 1 and secrion 4&5. Inserting screw B through
section 4&5 and section 6, install G Keps nut and tighten securely.Next insert the threaded caster stem
through the hole in the end of the lower cross brace then through the riser and finally the riser brace.
Install (H) flat washer and (I) Keps nut, repeat this at the remaining (3) aster locations and securely tighten.
As picture, put wheels 7 in front, and wheels with brake at the back.
To place the Oven on the cart first remove all of the items that are inside of the grill to make lifting easier.
Use a minimum of two people when lifting the Oven onto the cart. Place one of your hands in the bottom
vent of the Oven and the other under the grill. Lifting by the hinge or the side tables could result in injury
and damage to the product.
Position the nest upright on a flat level surface with the help of an assistant you can now place the oven
into the nest. Position the oven so the vent door is accessible between two of the risers and gently push
downward on the oven to seat it in the nest.
