636720
12
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
12
Replacement the trimmer cord
Fig.4
1. Press on each side of the line compartment. The lid may now be removed.
2. Dismount the roll simply by pulling it. Leave the spring on the spool. Remove any bits of line.
3. Take 3-4 meters of new line (2,4 mm) and place it double in a loop-
4. Fit the loop in the middle of the spool and wind the nylon lines around the spool in each groove
without twisting the line. Follow the direction of the arrows from bottom of the spool.
Do not overfill the spool!
5. Mount the line compartment in reverse order. First, fit the spring into its position. Then place the line
in the two metal mortises of the line compartment.
6. Mount the lid. Ensure that it is fitted securely. Cut of excess nylon line.
Operation
For moving the line forward you tap the trimmer head lightly against the ground while the engine
runs at full speed.
Hold the trimmer at an upright angle towards the area that is to be cut.
Stones and walls, and poles cause the line to be worn down very fast.
Small trees and bushes can be easily damaged by the brush cutter.
Start / Stop.
How to start
See fig. 6
1. Press and hold the button
2. Press and hold the button
How to stop the engine
1. Release all buttons.
Vibrations may travel up into the handle
during use. We therefore recommend taking
a break every 2 hours.
Storage
Storage the product in a dry environment. It is recommended to hang the product on a wall, ensuring it is not
supporting on any of the attachment tools.
Lubrication of hedge trimmer accessory
The gearbox is lubricated from the factory, but for every 30-hour operation Grease MUST be refilled. Top up
with grease type: MULTIFAK EP-0 using a grease gun (not included) on the lubrication nipple.
Texas part no. 90306500.
Please note that the gearbox must be lubricated at all-time (all parts)
The blades must be kept lubricated to prevent friction and to extend the durability. Lubricate the blades with
regular hedge trimmer oil.
Lubricating the chain on the chainsaw accessory
Let the chainsaw run idle for 2-3 min.
Place saw on a flat surface
Remove the lid.
Add chain oil in the chainsaw container (top up).
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Texas Smart Combi 100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Texas Smart Combi 100 in de taal/talen: Engels, Deens als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info