436939

Texas Instruments ti 34 multiview Handleiding

16
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
TI-34 MultiView™
Scientific Calculator
Guidebook
Learn more about TI Technology through the online help at education.ti.com/eguide.
ii
Important information
Texas Instruments makes no warranty, either express or implied, including but not
limited to any implied warranties of merchantability and fitness for a particular
purpose, regarding any programs or book materials and makes such materials
available solely on an "as-is" basis. In no event shall Texas Instruments be liable to
anyone for special, collateral, incidental, or consequential damages in connection with
or arising out of the purchase or use of these materials, and the sole and exclusive
liability of Texas Instruments, regardless of the form of action, shall not exceed the
purchase price of this product. Moreover, Texas Instruments shall not be liable for any
claim of any kind whatsoever against the use of these materials by any other party.
MathPrint, APD, Automatic Power Down, EOS, and MultiView are trademarks of Texas
Instruments Incorporated.
Copyright © 2019 Texas Instruments Incorporated
Contents
Getting Started 1
Examples 1
Switching the Calculator On and Off 1
Display Contrast 1
Home Screen 1
2nd Functions 2
Modes 2
Menus 4
Scrolling 6
Answer Toggle 7
Last Answer 8
Order of Operations 8
Clearing and Correcting 10
Math Operations 10
Memory and Stored Variables 12
Math Functions 15
Integer Divide 15
Fractions 15
Percentages 17
x10n Key 18
Powers, Radicals, and Reciprocals 19
Pi 20
Angle Menu 21
Trigonometry 23
Logarithms and Exponential Functions 25
Statistics 26
Probability 30
Math Tools 33
Data Editor and List Conversions 33
Stored Operations (op) 35
Reference Information 37
Errors 37
Battery Information 38
In Case of Difficulty 39
General Information 40
iii
1 Getting Started
Getting Started
Examples
Each section is followed by instructions for keystroke examples that demonstrate the
TI-34 MultiView™ functions.
Examples assume all default settings, as shown in the Modes section.
For more activities and examples, see the TI-34 MultiView Teacher Guide available at
education.ti.com/guides.
Switching the Calculator On and Off
&turns on the TI-34 MultiView™ calculator % ' turns it off. The display is
cleared, but the history, settings, and memory are retained.
The APD™ (Automatic Power Down™) feature turns off the TI-34 MultiView™ calculator
automatically if no key is pressed for about 5 minutes. Press &after APD. The
display, pending operations, settings, and memory are retained.
Display Contrast
The brightness and contrast of the display can depend on room lighting, battery
freshness, and viewing angle.
To adjust the contrast:
1. Press and release the %key.
2. Press T(to darken the screen) or U(to lighten the screen).
Home Screen
On the Home screen, you can enter mathematical expressions and functions, along
with other instructions. The answers are displayed on the Home screen. The TI-34
MultiView screen can display a maximum of four lines with a maximum of 16
characters per line. For entries and expressions of more than 16 characters, you can
scroll left and right (!and ") to view the entire entry or expression.
In the MathPrint™ mode, you can enter up to four levels of consecutive nested
functions and expressions, which include fractions, square roots, exponents with ^, xÑ,
and x2.
When you calculate an entry on the Home screen, depending upon space, the answer is
displayed either directly to the right of the entry or on the right side of the next line.
Special indicators may display on the screen to provide additional information
concerning functions or results.
Indicator Definition
2ND 2nd function.
FIX Fixed-decimal setting. (See Modes section.)
SCI Scientific notation. (See Modes section.)
DEG, RAD Angle mode (degrees or radians). (See Modes
section.)
L1, L2, L3 Displays above the lists in Data Editor and List
Conversions.
The TI-34 MultiView™ calculator is performing
an operation.
º » An entry is stored in memory before and/or
after the active screen. Press #and $to
scroll.
¸ ¹ An entry or menu displays beyond 16 digits.
Press !and "to scroll. (See Scrolling for
more information.)
2nd Functions
%
Most keys can perform two functions. The primary function is indicated on the key and
the secondary function is displayed above it. Press %to activate the secondary
function of a given key. Notice that 2nd appears as an indicator on the screen. To
cancel it before entering data, press %again. For example, 3% c 125 <
calculates the cube root of 125 and returns the result, 5.
Modes
q
Use qto choose modes. Press $ # ! " to choose a mode, and <to select it.
Press -or % s to return to the Home screen and perform your work using the
chosen mode settings.
Default settings are shown.
DEGRAD Sets the angle mode to degrees or radians.
NORMSCI Sets the numeric notation mode. Numeric notation modes affect only the
display of results, and not the accuracy of the values stored in the unit, which remain
maximal.
NORM displays results with digits to the left and right of the decimal, as in
123456.78.
SCI expresses numbers with one digit to the left of the decimal and the appropriate
power of 10, as in 1.2345678x105(which is the same as 123456.78).
Getting Started 2
3 Getting Started
Note: Cis a shortcut key to enter a number in scientific notation format. The
result displays in the numeric notation format set in mode.
Note: In some restricted environments (for example, data editor and the %
hmenu), the TI-34 MultiView™ calculator may display Einstead of x10n.
FLOAT0123456789 Sets the decimal notation mode.
FLOAT (floating decimal point) displays up to 10 digits, plus the sign and decimal.
0123456789 (fixed decimal point) specifies the number of digits (0 through 9) to
display to the right of the decimal.
CLASSICMATHPRINT
CLASSIC mode displays inputs and outputs in a single line.
MATHPRINT mode displays most inputs and outputs in textbook format. Choose the
MathPrint™ mode for better visual confirmation that math expressions have been
entered correctly and to better reinforce the correct math notation.
Note: Switching the mode between Classic and MathPrint clears calculator history
and the stored operations (op1 or op2) value.
Un/dn/d Determines how fractional results are displayed. Un/d displays results as a
mixed number, if applicable. n/d displays results as a simple fraction.
MANSIMPAUTOSIMP Determine whether or not a fractional result will be simplified
automatically.
MANSIMP The user simplifies fractions manually step-by-step. »next to the
resulting fraction signifies that the fraction is not yet in simplest form. See
Fractions, }for details.
AUTOSIMP The calculator automatically simplifies fractional results to the lowest
terms.
Example of Classic and MathPrint Modes
Classic mode MathPrint mode
Sci Sci
Float mode and answer toggle
key.
Float mode and answer toggle
key.
Fix 2 Fix 2 and answer toggle key.
Classic mode MathPrint mode
n/d Un/d
Mansimp
Autosimp
Exponent example Exponent example
Cube root example Cube root example
Menus
Certain keys display menus: H,% =,% A,% B,d,v v,%
t,% , % h, and % {.
Press $and "to scroll and select a menu item, or press the corresponding number
next to the menu item. To return to the previous screen without selecting the item,
press -. To exit a menu or application and return to the Home screen, press %
s.
Getting Started 4
5 Getting Started
The menu chart shows the menu keys and the menus they display.
H% =
PRB RAND DMS R ³ ´ P
1: nPr
2: nCr
3: !
1: rand
2: randint(
1: °
2: Å
3: Æ
4: r
5: ´DMS
1: R ´Pr(
2: R ´Pq(
3: P ´Rx(
4: P ´Ry(
% A % B
LOG LN TRIG
1: log(
2: 10^(
1: ln(
2: e^(
1: sin(
2: cos(
3: tan(
4: sin-1(
5: cos-1(
6: tan-1(
d
MATH NUM
1: lcm(
2: gcd(
3: 3
4: 3Ñ(
1: abs(
2: round(
3: iPart(
4: fPart(
5: min(
6: max(
7: remainder(
v v
Press once to display the Data editor screen. Press again to display the menu.
CLEAR CNVRSN
1: Clear L1
2: Clear L2
3: Clear L3
4: Clear ALL
1: Add/Edit Cnvrs
2: Clear L1 Cnvrs
3: Clear L2 Cnvrs
4: Clear L3 Cnvrs
5: Clear ALL
Press vwhile you are in the Add/Edit Conversion option of the CNVRSN menu to
display this menu:
Ls
1: L1
2: L2
3: L3
% t
STATS
1: 1-Var Stats
2: 2-Var Stats
3: StatVars*
* This menu option displays after you calculate 1-var or 2-var stats:
StatVars
1: n
2: Ï
3: Sx
Etc. See Statistics
values for a full list.
% % h % {
Reset Recall Var Clear Var
1: No
2: Yes
1: x =
2: y =
3: z =
4: t =
5: a =
6: b =
7: c =
1: Yes
2: No
Scrolling
! " # $
Press !or "to scroll entries on the Home screen and to navigate in menus. Press
% ! or % " to move the cursor directly to the beginning or end of the current
expression.
Getting Started 6
7 Getting Started
#and $moves the cursor up and down through menu items, entries in Data editor,
and previous entries on the Home screen. You can reuse a previous entry by pressing
<to paste it on the bottom line, and then evaluating a new expression.
% # moves the cursor to the top entry of the active column in Data editor, or to the
previous entry on the Home screen. Press % # again to move the cursor to the
oldest entry on the Home screen.
% $ moves the cursor to the first blank row of the active column in Data editor, or
below the last entry on the Home screen.
Examples
Scroll 1T1<
2T2<
3T3<
4T4<
####<
T2<
Answer Toggle
r
Press the rkey to toggle the display result between fraction and decimal answers,
and exact pi and decimal.
Example
Answer
toggle
2g <
r
Last Answer
% i
The most recently calculated result is stored to the variable ans.ans is retained in
memory, even after the TI-34 MultiView™ calculator is turned off. To recall the value
of ans:
• Press % i (ans displays on the screen), or
• Press any operations key (T,U, and so forth) as the first part of an entry. ans and
the operator are both displayed.
Examples
ans 3V3<
V3<
3% c % i
<
Order of Operations
The TI-34 MultiView™ calculator uses Equation Operating System (EOS™) to evaluate
expressions. Within a priority level, EOS evaluates functions from left to right and in
the following order.
1st Expressions inside parentheses.
2nd Functions that need a )and precede the
argument, such as sin,log, and all R³´Pmenu
items.
Getting Started 8
9 Getting Started
3rd Fractions.
4th Functions that are entered after the argument,
such as x2and angle unit modifiers.
5th Exponentiation (^) and roots (xÑ).
Note: In Classic mode, exponentiation using G
is evaluated from left to right. The expression
2^3^2 is evaluated as (2^3)^2, with a result of
64.
In MathPrint™ mode, exponentiation using Gis
evaluated from right to left. The expression
2^3^2 is evaluated as 2^(3^2), with a result of
512.
The TI-34 MultiView™ calculator evaluates
expressions entered with Ffrom left to right
in both Classic and MathPrint modes.
6th Negation (L).
7th Permutations (nPr) and combinations (nCr).
8th Multiplication, implied multiplication, division.
9th Addition and subtraction.
10th Conversions (n/d³´Un/d,f³´d,´DMS).
11th <completes all operations and closes all
open parentheses.
Examples
+Q P L 60 T5V M 12
<
(L)1T M 8T12
<
() b9T16 <
4V D 2T3E
<
4D2T3E <
^ and xÑ b 3G2" T 4
G2<
Clearing and Correcting
-Clears characters and error messages.
Clears characters on the entry line, then clears
the display when you press -again. Scroll
up to clear entries in history.
Backs up one screen in applications.
JDeletes the character at the cursor.
% f Inserts a character at the cursor.
% { Clears variables x,y,z,t,a,b, and c.
% 2Resets the TI-34 MultiView™ calculator.
Returns unit to default settings; clears memory
variables, pending operations, all entries in
history, functions in applications, and statistical
data; clears stored operations (op1 or op2), and
ans.
Math Operations
d
ddisplays a menu with two submenus. Some functions require you to enter 2
values, numbers, or expressions that equal or return a number. % ` separates two
values.
MATH submenu:
lcm(n1,n2)
gcd(n1,n2)
Finds the least common multiple (lcm) or
greatest common divisor (gcd) of two values, n1
Getting Started 10
11 Getting Started
and n2, which are positive integers.
n3Calculates the cube of n.
3Ñ(nCalculates the cube root of n.
NUM submenu:
abs(n)Displays absolute value of n.
round(n,digits)Rounds nto specified number of digits.
iPart(n)
fPart(n)
Returns only the integer part (iPart) or
fractional (decimal) part (fPart) of n.
min(n1,n2)
max(n1,n2)
Returns the minimum (min) or maximum (max)
of two values, n1and n2.
remainder(n1,
n2)
Returns the remainder resulting from the
division of 2 values, n1by n2.
Examples
abs d " 1M2P
3<
round d " 2g %
`3E <
iPart,
fPart
d " 3
23.45 E <
d " 4
23.45 E <
3Ñn,n32d3<
d4
8<
remainder d " 7
10 % ` 6E
<
³Problem
Find the least common multiple of 30 and 84 using prime factorization by hand. Verify
your work using the calculator.
2V3V5<
2F V 3V7<
2F V 3V5V7<
d1
30 % ` 84 E <
The lcm (30, 84) is 420.
Memory and Stored Variables
z L % h % {
The TI-34 MultiView™ calculator has 7 memory variables—x,y,z,t,a,b, and c. You can
store a real number or an expression that results in a real number to a memory
variable.
Llets you store values to variables. Press Lto store a variable, and press zto
select the variable to store. Press <to store the value in the selected variable. If
this variable already has a value, that value is replaced by the new one.
zaccesses the variables. Press this key multiple times to choose x,y,z,t,a,b, or c.
You can also use zto recall the stored values for these variables. The name of the
variable is inserted into the current entry, but the value assigned to the variable is used
to evaluate the expression.
% h recalls the values of variables. Press % h to display a menu of
variables and their stored values. Select the variable you want to recall and press <.
The value assigned to the variable is inserted into the current entry and used to
evaluate the expression.
% { clears all variable values. Press % { and select 1: Yes to clear all
variable values.
Examples
Clear Var % { 1
Store 15 L z
Getting Started 12
13 Getting Started
<
Recall % h
< F <
L z z
<
z z
< W 4<
³Problem
In a gravel quarry, two new excavations have been opened. The first one measures 350
meters by 560 meters, the second one measures 340 meters by 610 meters. What
volume of gravel does the company need to extract from each excavation to reach a
depth of 150 meters? To reach 210 meters?
350 V560 L z <
340 V610 L z z <
… 16 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Texas-Instruments-ti-34-multiview

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Texas Instruments ti 34 multiview bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Texas Instruments ti 34 multiview in de taal/talen: Engels als bijlage per email.

De handleiding is 0,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Texas Instruments ti 34 multiview

Texas Instruments ti 34 multiview Gebruiksaanwijzing - Nederlands - 48 pagina's

Texas Instruments ti 34 multiview Gebruiksaanwijzing - Deutsch - 45 pagina's

Texas Instruments ti 34 multiview Gebruiksaanwijzing - Français - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info