636721
12
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
12
! Examine the tool for loose bolts and nuts, leakage etc. Replace any damaged parts. Replace the
trimmer head / blade if it is cracked, chipped or damaged in any other way.
! Make sure that the trimmer head / blade is fitted correctly and securely fastened. If not this may lead
to serious personal injury.
! Make sure that all safety guards and handles are correctly and securely fastened.
! The cord head rotates while the carburetor is adjusted. Wear protection and follow all safety
instructions.
! Let the engine cool off before storage.
! Empty the fuel tank and fasten the brush cutter when it is transported.
Identification of parts
See fig.1 illustration:
*Only BCU26S and BCU33S models
Assembly
BCU 26 and BCU 33
Follow the mounting procedure as shown in Fig.2-A, Fig 2-B and Fig 3
1. Mount the protection guard. See Fig.2-A
2. Attach the middle tube to the machine, fasten with butterfly knob. See Fig 2-B
3. Mount the throttle lever and handle as shown in Fig 3 illustration A. Ensure that the machine is in
balance and bolt are tighten.
BCU 46
Follow the mounting procedure as shown in Fig.2-A and Fig 3
1. Mount the protection guard. See Fig.2-A
2. Mount the throttle lever and handle as shown in Fig 3 illustration A. Ensure that the machine is in
balance and bolt are tighten.
Use Brush cutter and Grass trimmer
When the engine is stopped the rotating blade must be held in grass or bush until it holds still.
Always hold the machine with both hands.
The machine must not be used if the safety guard is not correctly fitted and in mint condition.
Always stop the engine before attempting to remove objects that may have stuck on the blade.
Never touch or try to stop the blade while it is still spinning.
A rotating blade may cause damage, as it continues to spin after the engine has stopped or the gas
has been turned off. Always be in control of the tool until the blade has stopped spinning.
Always make sure that the blade is mounted securely and correctly before every time is used.
Only use a sharp blade. Replace blades that are worn or damaged.
Only use original spare parts.
Only use the blade for weeds, grass and similar.
Throw back is something that may occur when the rotating blade gets into contact with something, it
cannot cut. This contact may have the effect, which the blade stops for a moment, and suddenly the
tool is thrown away from the hard object that was hit. This reaction may be so violent that the user
loses control of the tool. Throw back may occur without warning if the blade is stuck, loses speed or
impeded. This is most likely in areas where it is difficult to see the material that is being cut.
The harness must always be used and adjusted to fit in the correct manner.
Keep a firm grip on both handles while the blade is running. Keep the blade away from your body
and below your waist.
A
Engine
C
Bracket
E
Cutter Trimmer
B
Throttle lever Handle
D
Guard
F
Tube with lock knob *
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Texas BCU26S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Texas BCU26S in de taal/talen: Duits, Engels, Frans, Pools, Deens als bijlage per email.

De handleiding is 1,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info