562463
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
6
• Ultima 40 Mk 2
Connecting
Connection variations
A connector terminal with four
terminal clips is located on the back
side of the speakers. Here you can
connect the speaker cables directly
or with pin plugs. We only describe
the direct connection in these instruc-
tions.
The terminals are each marked in
red (+) and black (-).
In addition to a standard connection,
where every speaker column is connected to the amplifi er
with a cable, you can also choose the variants “Bi-Wir-
ing” or “Bi-Amping”.
Standard connection
With this connection, the Ultima 40 Mk 2 speakers are
connected like conventional speakers with one double-
strand speaker cable each. The contact bridges between
the connector terminators may not be removed in the
process. You can connect the cables accordingly to the
top or bottom terminals.
Bi-Wiring
With Bi-Wiring, the speaker is connected to the fi nal
amplifi er using two separate speaker cables for the bass
sound and mid/treble sound branch. This decoupling of
the speaker systems may improve the sound quality.
Bi-Amping
In case of Bi-Amping, the bass sound and mid/treble
sound branch are each powered by an own power ampli-
er of the amplifi er. You connect a double-strand speaker
cable to each power amplifi er. Afterwards, you connect
the speaker cable to the upper and lower connector ter-
minators of the speakers respectively. Advantage: More
power and improved sound quality.
You only have to remove the
contact bridges for Bi-Wiring or
Bi-Amping operation:
To do so, turn the connector
terminals counterclockwise until
loose and then pull the contact
bridges out.
The top terminals lead to the high
range and midrange speakers,
the bottom terminals lead to the
low range speakers.
Connecting the cables
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
1. Turn off your amplifi er.
2. Lay the speaker cables from your amplifi er to each
speaker. These cables should be high-quality double-
wire speaker cable with marked strands. The diameter
should amount to at least 1.5 mm
2
.
Make sure that the polarity is correct!
Connect the same-colour terminals of your
speakers and amplifi er with each other. Oth-
erwise the sound quality will suffer. The individual single
wires of the speaker cables are marked with different
colours or shapes to facilitate the process.
3. Split the single
wire down to
approx. 30 mm
on both ends
and strip ap-
prox. 10 mm of
insulation off of
each cord. Twist
the stripped
single wire ends together so that no wire protrudes.
4. Turn the connector terminals
counterclockwise until loose.
Run the stripped single wire
ends into the holes that are
now visible. Turn the terminal
clockwise until closed.
The cable has now been
clamped in place.
5. Connect the other end of the
speaker cable to your amplifi er.
The operating instructions of
the appliance should contain
notes on this.
92135 GB 20120508.indd 692135 GB 20120508.indd 6 08.05.12 09:0508.05.12 09:05
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Teufel-Ultima-40-Mk-2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Teufel Ultima 40 Mk 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Teufel Ultima 40 Mk 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info