703875
9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Technical description and instruction manual
8.0 Multichannel power amplifier
AmpStation
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
2 • AmpStation
Contents
General notes and information .........3
Notice .............................................. 3
Original packaging .......................... 3
Complaints ...................................... 3
Contact ............................................ 3
For your safety ...................................4
Proper use ....................................... 4
Explanation of terms ....................... 4
Safety notes .................................... 4
Explanation of symbols................... 6
Overview .............................................7
Unpacking ....................................... 7
Product contents ............................. 7
Checking the product contents ...... 7
Control elements and connections ..8
AmpStation...................................... 8
Setup / Connection ...........................9
Setup location ................................. 9
Location tips ............................... 9
Connecting the speakers ............... 9
Inputs............................................. 10
Link ................................................ 10
Connecting to a power supply ...... 11
Use ................................................... 12
Activating and deactivating ..........12
Automatic activation/
deactivation ................................... 13
Cleaning & Maintenance ............... 14
Troubleshooting .............................. 15
Technical data ................................. 16
Please read
Before operating the device,
please read the safety notes
and instruction manual care-
fully. Only in this way, can you ensure
that all functions are used in a safe
and reliable manner. Store the instruc-
tion manual in a safe place and also
be sure to pass it on to any subse-
quent owner.
3 • AmpStation
General notes and information
Notice
The information in this document may
change without prior notice and in no
way constitutes any liability on the part
of Lautsprecher Teufel GmbH.
No part of this instruction manual
may be reproduced in any form or be
broadcasted in any way electronically,
mechanically, by photocopy or record-
ing without the written permission of
Lautsprecher Teufel GmbH.
© Lautsprecher Teufel GmbH
Version 1.0
January 2015
Original packaging
If you wish to exercise your eight-week
right of return, we ask that you be
absolutely sure to hold onto the pack-
aging. We can only accept the return
of the AmpStation WITH THE ORIGINAL
PACKAGING.
Empty boxes are not available!
Complaints
In case of complaint we will need the
following information to process your
enquiry:
1. Invoice number
Can be found on the sales slip (en-
closed with the product) or on the
order confirmation received as a PDF
document, e.g. 4322543
2. Serial number or batch number
Located on the back of the unit, e.g.
serial number: KB20240129A-123.
Thank-you for your support!
Contact
Please contact our customer service
with any questions, suggestions or
criticism:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Strasse 44
10787 Berlin (Germany)
Phone 00800 - 200 300 40 (toll-free)
Fax +49 (0)30 / 300 930 930
E-mail: service@teufelaudio.com
teufelaudio.com
4 • AmpStation
For your safety
Proper use
The AmpStation is designed to amplify
and play back music and speech from
an external player on external speak-
ers.
Only use the AmpStation as described
in this instruction manual. Any other
use will be deemed as not in accord-
ance with the instructions and may
lead to damage of property or even
persons.
The manufacturer accepts no liability
for damage caused by improper use.
The AmpStation is intended for private
use.
Explanation of terms
You can find the following signal terms
in these instructions:
WARNING
This signal term indicates a
moderate risk, which, if not
avoided, may result in death or
severe injury.
CA UTION
This signal term indicates a low
risk, which, if not avoided, may
result in minor or moderate
injury.
NOTICE
This signal term warns you of
potential damage.
Important information
Safety notes
This chapter contains general safe-
ty notes which you should always
observe to protect yourself and third
parties. Also observe the warning
notes in each chapter of this instruc-
tion manual.
Improper electrical installation or
excessive mains voltage may result
in an electrical shock.
The device is suitable for a mains
voltage of 110/230 V ~ / 50/60 Hz.
When connecting the device, make
sure that the correct voltage is pres-
ent. You can find more information in
this respect on the nameplate.
Check the device regularly for dam-
age.
Immediately disconnect the mains
plug and do not operate the de-
vice if its housing or mains cord is
defective or exhibits other visible
damages.
If the mains cord of the device is
damaged, only have it replaced
by the manufacturer, its customer
5 • AmpStation
service department or a person with
similar qualifications.
This device is disconnected from the
grid by pulling the mains plug. Thus,
make sure that the mains plug is
always easily accessible.
If the device emits smoke, smells
burnt or produces unusual sounds,
immediately disconnect it from the
mains and do not operate it further.
Never open the device housing.
Repairs may only be carried out by
an authorised specialist workshop. In
the process, only parts that corre-
spond to the original device data may
be used.
Only use the accessory products
specified by the manufacturer.
Only use the device in indoor areas.
Do not operate the device in wet
rooms and protect it from dripping
and splash water.
Make sure that no vases or other
vessels filled with liquid are located
on the device or nearby in order to
prevent liquid from penetrating the
housing. If water or other debris ends
up penetrating the housing, immedi-
ately pull the mains plug and take out
any batteries. Then send the device to
our service address.
Never modify the device. Unauthor-
ized interventions may affect the
safety and functionality.
Never touch the mains plug with wet
hands.
Power overload due to lightning
strike may damage or destroy the
unit. If the unit is unattended for a
prolonged period (e.g. when on va-
cation) or in the event of an incom-
ing storm, pull the mains plug.
An unsuitable setup location may
result in injury and damage.
If the AmpStation is not securely
mounted, do not use it in vehicles,
in unstable locations, on wobbly
tripods or furniture, on underdimen-
sioned brackets etc. The AmpSta-
tion may tip or fall over and cause
injury to persons or be damaged
themselves.
Place the AmpStation in such a way
that the cables do not pose a trip
hazard.
Do not use the device in environ-
ments where there is a risk of
explosion.
Children can become trapped in
the packing film when playing and
suffocate.
Do not allow children to play with
the device or the packing film. Dan-
ger of suffocation.
Ensure that children do not remove
small parts from the device or take
them off of the device (e.g. control
knobs or plug adapters). They could
swallow the parts and choke.
Never allow children to operate elec-
trical units unsupervised.
6 • AmpStation
Extended listening at high volumes
may lead to hearing loss.
To avoid damage to health, avoid ex-
tended listening at high volumes.
At high volumes, always maintain a
certain distance to the device and
never hold your ears directly up to a
speaker.
If the audio system is set to full
volume, it may produce very high
sound pressure. This may have psy-
chological consequences and also
cause physical injury. Children and
pets are particularly at risk. Set your
signal source device volume control
to a low setting before turning on
the power.
Explanation of symbols
Protection class II
Dual insulation
Risk of electrical shock – do
not open the housing.
Disconnect the mains cord
before changing a fuse.
Used units must not be
disposed of with house-
hold waste!
If the device is no longer oper-
ational, every consumer is required by
law to dispose of old devices separate-
ly from household waste, e.g. at a col-
lection point run by the communal au-
thority/boroughs. This ensures that old
devices are recycled in a professional
manner and also rules out negative
consequences for the environment.
For this reason, electrical equipment is
marked with the following symbol.
7 • AmpStation
Overview
Unpacking
Carefully open the box, take out the
EPE foam half-shell and carefully lift
the device out of the box.
Product contents
1x AmpStation
1x mains cord
1x Teufel Link connector cable
Checking the product
contents
Check that all items have been deliv-
ered and that nothing is damaged.
If the delivery is incomplete or exhib-
its transport damages, please con-
tact our service team (see page3).
Do not in any case operate the
device if it is damaged.
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
8 • AmpStation
Control elements and connections
AmpStation
21 3
4 5 6
78
Item Name Description
1–
Standby LED
2
POWER
Turn the device on/off
3WATTS
Power indication
4–
Mains connection
5 SPEAKER OUT
Speaker terminals
6 LINE IN
Audio inputs
7 AUTO POWER
Automatic activation/deactivation
8LINK
System connection
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
SPEA KER OU T 4 - 8 OHMS
9 • AmpStation
Setup / Connection
Setup location
NOTICE
If the device is subjected to
warm temperatures after being
cold (e.g. after transport), con-
densation may occur inside of
it.
In this case, wait at least 2
hours before
you connect and
activate it.
Location tips
Our website contains comprehen-
sive notes for correct setup.
Select a stable, level base.
Make sure that the environment is
clean and free from dust.
Select a location away from heat
sources and direct sunlight.
Lay the connector cables so that
they do not pose a tripping hazard.
Do not place any heavy objects on
the cables or the AmpStation.
Connecting the speakers
Only connect speakers with an im-
pedance of 4 – 16 ohm. If possible,
use high-quality speaker cables with
a diameter of at least 1.5mm
2
for the
connection. You can order this type of
cables in our webshop (www.teufelau-
dio.com) in the “Accessories” area.
The connector terminals SPEAK-
ER OUT (5) for the eight speakers
are located on the back side of the
AmpStation:
Speakers Label
Rear right REAR RIGHT
Rear left REAR LEFT
Surround right SURROUND RIGHT
Surround left SURROUND LEFT
Additional chan-
nel (subwoofer)
AUX
Front centre CENTER
Front right RIGHT
Front left LEFT
The terminals are each marked red (+)
and black (-).
Here you can connect the speaker
cables directly or using optional pin
plugs. Only the direct connection is
described below.
10 • AmpStation
Make sure the polarity is correct!
Connect the like coloured terminals.
Otherwise, the sound quality will
suffer.
The strands of the speaker single
wire are marked with different col-
ours or shapes.
1. Turn the connector terminals (5)
counterclockwise until loose.
5
SPEAKER OU T 4 - 8 OHMS
2. Split the speaker cables down to
approx. 30mm on both ends.
3. Remove approx. 10mm of the insu-
lation on each end.
4. Twist the single wire so that no
strands are protruding.
5. Run the stripped cable end into the
now visible hole.
6. Close the terminal by turning it
counter-clockwise. The cable has
now been clamped in place.
Inputs
C
onnect the jacks LINE IN(6)
of the
AmpStation with the output jacks of
your preamplifier, such as a Decoder-
Station. You will need up to 4 stereo
RCA cables for this.
6
Link
If using a compatible preamplifier from
Teufel (e.g. a DecoderStation), you
can connect the AmpStation with the
preamplifier via the connection LINK
(8). Thus, the devices are switched on
and off together.
For this you will need the supplied
Teufel Link connector cable.
8
11 • AmpStation
Connecting to a power
supply
CA UTION
The device is suitable for a mains
voltage of 110/230 V, 50/60 Hz.
When connecting the device, make
sure that the correct voltage is pres-
ent. You can find more information in
this respect on the nameplate.
This device is disconnected from the
grid by pulling the mains plug. Thus,
make sure that the mains plug is
always easily accessible.
4
SPEAKER OU T 4 - 8 OHMS
Connect the mains connector jack (4)
with a mains socket using the mains
cord .
1
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
The red standby LED (1) will be illumi-
nated.
12 • AmpStation
Use
Activating and
deactivating
CA UTION
Extended listening
at high volumes may
lead to hearing loss.
To avoid damage to
health, avoid extended listen-
ing at high volumes.
At high volumes, always main-
tain a certain distance to the
speaker and never hold your
ears directly up to it.
If the audio system is set to
full volume, it may produce
very high sound pressure.
This may have psychologi-
cal consequences and also
cause physical injury. Chil-
dren and pets are particularly
at risk. Set the volume control
of your audio system to low
volume before you turn it on.
1 2
0.01
0.1
30
20
10
3
3
dB
0
40
1
WATTS
10
50
150
Switch the AmpStation on or to
standby using the POWER button
(2).
When in standby, the standby LED
(1) will illuminate in red.
The device is not disconnected
from the mains when in standby
mode. Pull the mains plug out of the
socket to completely deactivate it.
13 • AmpStation
Automatic
activation/deactivation
7
HMS
You can toggle between the system
modes with the switch AUTO POWER
(7):
ON The AmpStation is permanently
switched on.
AUTO The AmpStation switches itself
on as soon as an audio signal
is present. If there's no audio
signal for approx. 20 minutes,
the AmpStation switches to
standby.
LINK The AmpStation is activated and
deactivated by the preamplifier
(only in case of using a Teufel
Link connector cable).
14 • AmpStation
Cleaning & Maintenance
CA UTION
Pull the mains plug out of the socket
before you start cleaning the device.
NOTICE
External influences may dam-
age or destroy the device.
If the device is to be left unat-
tended for a prolonged period
of time (e.g. during a vaca-
tion) or if a thunderstorm is
forecast, pull the mains plug
out of the socket. Otherwise,
sudden overvoltage could
cause the device to become
defective.
If possible, only use plain
water without any additives.
In case of stubborn marks,
a mild soap solution may be
used.
Do not use caustic cleaning
products, white spirit, thin-
ners, petrol or similar under
any circumstances. Such
cleaning agents may damage
the delicate surface of the
housing.
Ideally, you should remove dust or
small amounts of dirt with a dry,
smooth leather cloth.
Use a damp cloth to rub off stub-
born dirt. Make sure that no liquid
penetrates the housing.
Then immediately wipe the damp
surfaces off with a soft cloth without
applying pressure.
15 • AmpStation
Troubleshooting
The following advice should help you to solve problems. If this does not help, you
will find useful information in the detailed FAQs on our website. Otherwise, please
contact our hotline (see page 3). Take note of the warranty instructions.
Problem Possible cause Solution
The
AmpStation
doesn't
emit sound.
The AmpStation is off
or doesn’t have any
power.
Activate the AmpStation with the switch
(2). Check the mains cord and socket.
The preamplifier is set
to “mute”.
Deactivate the mute mode on the pream-
plifier (mostly with the button).
The volume is set to “0”
on the preamplifier.
Increase the volume.
The
AmpStation
hums.
The AmpStation is
connected to a different
power circuit from the
rest of the system.
Connect the AmpStation and preamplifier
to the same power circuit.
The humming is caused
by problems with the
power supply.
Buy a mains filter and connect both devic-
es to it.
The humming is caused
by a multiple socket
strip.
Use a different multiple socket strip or
connect the AmpStation directly to the wall
socket. It may also help to insert the mains
plug in the socket the other way around.
The
AmpStation
does not
automati-
cally turn
off.
The switch
AUTO POWER (7) is not
set to “AUTO” or “LINK”.
Set the switch AUTO POWER (7) to “AUTO”
or “LINK”.
The Teufel Link connec-
tor cable has not been
inserted.
Verify the correct connection of the
AmpStation and the preamplifier.
Instruction No. HCHAM / 92955_GB_20150112
Please contact our customer service with any questions, suggestions or criticism:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Strasse 44
10787 Berlin (Germany)
Phone: 00800 - 200 300 40 (toll-free)
Fax: +49 (0)30 - 300 930 930
www.teufelaudio.com
No responsibility is assumed for the correctness of this information.
Technical changes, typographical errors and other errors reserved.
This product conforms with Council of the
European Union guidelines 2004/108/EC and
2006/95/EC.
Dimensions (WxHxD) 270 x 70 x 300 mm
Weight 3.7 kg
Operating voltage 110/230 V~, 50/60 Hz
Max. power consumption 500 watts
Technical data
You can find further technical data on our website.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Teufel AmpStation bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Teufel AmpStation in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info