719238
104
Verklein
Vergroot
Pagina terug
1/165
Pagina verder
1. Model 3 records the signal from the
remote. The touchscreen instructs you to
stand in front of the vehicle, point the
remote at the front bumper and press and
hold the button until the headlights flash.
When the headlights flash, Model 3 has
learned the remote and you can touch
Continue on the touchscreen. If the
headlights do not
flash, refer to the
following guidelines.
2. The device's receiver learns Model 3. The
touchscreen instructs you to press the
LEARN button on the device's receiver. If
training the receiver does not work, refer
to the following guidelines.
Note: Only devices that are equipped with
a “rolling code” remote need to learn
Model 3. If you have an old device that is
not equipped with a "rolling code" remote,
the device does not need to learn Model 3
and you can skip this part of the process.
You can also skip this part if your receiver
is "Quick-Train" compatible.
Headlights do not
flash
Check the batteries in the remote. It is a
good idea to replace the batteries before
you start programming.
Hold the remote against the front bumper,
with the button pressed, approximately 6
in (15 cm) to the left of the Tesla emblem.
In some cases you must hold the button
on the remote for up to three minutes.
Check compatibility of the remote by
contacting the HomeLink manufacturer
(www.homelink.com).
After programming, the device does not
work
Park Model 3 with its front bumper as
close as possible to the HomeLink device
(garage door, gate, etc.).
Make sure you haven’t reached the device
receiver's limit of learned remotes/cars.
Most receivers can learn up to
five
remotes/cars. If the receiver's memory is
full, you must clear the memory and
restart the programming process. For
instructions on how to clear the receiver's
memory, refer to the owner
documentation provided with the
HomeLink device.
Make sure you are pressing the receiver's
LEARN button. Most receivers have two
buttons and a LED. One button is a RESET
button and the other is a LEARN button.
Pressing the LEARN button usually causes
the LED to flash. For instructions on how
to put the receiver into learning mode,
refer to the owner documentation
provided with the HomeLink device.
Most devices stay in learning mode for
only three to
five minutes. Immediately
after pressing the device's LEARN button,
follow the instructions displayed on the
touchscreen.
HomeLink
®
Universal Transceiver
102 Model 3 Owner's Manual
104

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tesla Model 3 - 2018 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tesla Model 3 - 2018 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info