BEFORE USING YOUR APPLIANCE FOR THE FIRST
TIME:
Conrm that the mains voltage on the rating plate on the unit
is correct for your area.
Remove the jug, lter and lter holder.
Wash these items and the measuring spoon in warm soapy
water, rinse well with clear warm water and allow to dry.
Wipe the main unit with a damp cloth.
Reassemble the unit.
PREPARING YOUR COFFEE MAKER
Place the coee maker on a rm stable worktop. Ensure that
there are no overhanging work cupboards or objects nearby
that can be damaged by heat or steam. Make sure you have
plenty of room to work and operate the machine.
Mains ON/OFF Button
Press to switch the machine ON.•
Press again to switch the machine OFF.•
OPERATION
To remove the lter:
Open the lid.•
Holding the tab (arrowed), lift out the lter holder with •
the lter inside.
To replace the Filter:
Place the lter holder in the machine with the tab to the •
rear right hand side as shown.
Place the lter in the holder and fold the handle (shaded •
in the image below) down.
Close the lid.•
NOTE: If the tab on the lter holder is incorrectly placed the lid
will not close.
Before using the Coee maker for the rst time:
The water tank has graduated levels corresponding to the
number of cups your coee maker can brew. Fill the tank with
fresh tap water up to the “10” (MAX) mark. Do NOT overll.
Close the tank lid. Ensure it locks into place.
Place the jug centrally on the hotplate. The spring valve in the
lter holder should engage with the aperture in the jug lid.
Press the Mains ON/OFF Button. The switch will light up showing
the unit is operational.
The water will now percolate through the lter and into the jug.
When the brewing cycle is complete (no more water entering
the jug), switch the machine o and empty the jug. Carry out 2
or 3 full cycles and then switch o the machine.