Before using the unit for the first time:
Disassemble the processor. Refer to the
assembly instructions on the next pages
and reverse the procedure.
Separate the mixing bowl and the lid from
the motor unit.
Remove the Pusher from the feed tube.
Remove the Grating and/or Slicing plates
from the plate holder (if attached).
Lift the steel “S” shaped chopping blade
from the Blade Protector . Hold the cover at
the sides and withdraw the blade assembly
carefully (see below). Do not touch the
blade edges.
Wash the metal ‘S’ Blade and the grating and
slicing plates in warm soapy water, taking
care not to touch the cutting surfaces. Rinse
and dry thoroughly.
Wash the plastic blade, plate holder, drive
shaft, the mixing bowl and lid, the blade
protector and the pusher in warm soapy
water, rinse and dry thoroughly.
Wipe the motor unit with a damp cloth
and dry thoroughly.
Store all unused blades/plates safely
out of the reach of children.
Page 2
Your Food Processor & Components
Page 3 Page 4
Attaching and removing a grating or slicing plate
6A: Push the plate so that the two tabs of the plate engage with the locating slots in the centre of the plate holder.
6b: Press down so the tab on the edge of the plate locks into the holder. Take care not to touch any sharp edges. If necessary
wear protective gloves.
6c: To remove the plate, invert the plate holder and push the plate out as shown.
Please follow all the safety precautions listed below for safety and to
reduce the risk of injury or electrical shock.
Read all the instructions carefully before using your appliance and keep
them for future reference. If you pass the product on to a third party,
make sure to include this manual.
Unplug the appliance from the mains supply when not in use, when
removing or attaching accessories, or before cleaning any part of the
appliance.
This appliance is for occasional household use only.
Do not use outdoors or in damp conditions.
Do not immerse the motor unit or the electrical cord or plug in liquids.
Do not use near a source of heat or on an unstable surface.
Ensure that the power cord does not touch any hot surface and that it
does not overhang the edge of your work surface.
Before unplugging the power cord switch the machine off. When
unplugging, hold the plug top, not the power cord.
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner.
Return the appliance to the nearest authorised service facility for
examination, repair or electrical or mechanical adjustment.
Do not use attachments or accessories which are not recommended by
the manufacturer. They may cause malfunction or injury.
Do not attempt to replace the power cord on this appliance. This should
only be carried out by authorised service personnel with specialist tools.
Store the appliance away from direct sunlight and out of the reach of
children.
There are no user serviceable parts in your appliance Unauthorised
dismantling or servicing will void the product warranty.
Do not use the appliance for any purpose not expressly specified in this
manual.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children unless they are aged from 8 years and above and supervised.
Keep the appliance and its cord out of reach of children less than 8 years.
When operating your appliance:
When the appliance is not in use make sure that it is safely
unplugged from the mains supply.
To reduce the risk of injury, never attach the blade without first securing the
bowl properly in place.
When using the unit ensure there is adequate room in the vessel.
Do not operate the appliance with an empty bowl.
Do not run the appliance continuously for more than 1.5 minutes. After a
prolonged period of continuous use let the unit rest for at least 3 minutes
before using it again.
The blades on this appliance are sharp. Treat them with care and never
allow fingers, hair, or clothing to come into contact with a blade.
Store unused blades safely.
If you wish to scrape the contents of the bowl with a spatula, remove the
blade first.
Do not process food containing hard objects, such as meat containing
bones or fruits with large hard stones, which cannot be safely broken up.
If a blade gets clogged, switch off, unplug from the mains and allow the
unit to stop before clearing the obstruction.
Operate the appliance is on a sturdy work surface. and hold or support it
during operation
Do not yank or pull the cord as this may damage it and eventually cause a
risk of electric shock.
To protect against fire, do not operate the unit in the presence of explosive
and/or flammable fumes.
Keep the appliance out of the reach of children.
NOTE: Never process liquids or foods with a high liquid content as they
may leak into the appliance motor.
NEVER process hot foods, and especially hot liquids.
The appliance is not intended to be operated by means of an external timer
or separate remote-control system.
WARNING: The blades on this appliance are extremely sharp. Use great
care when handling them and never touch the sharp surfaces. Use
protective gloves if necessary.
Safety Guide-Please Read Carefully
Unpacking
Refer to the illustration on the next page and identify the
components. The packaging contains:
$The processor motor, mixing bowl and lid
$ Pusher
$Motor Shaft
$Metal chopping blade and Plastic puree blade
$2 Grating Plates
$2 Slicing Plates
$Plate Holder
Remove all packaging from the appliance. Retain the
packaging. If you dispose of it please do so according to
any recycling regulations.
If items are missing or damaged, contact your nearest Tesco
store for assistance.
Read and retain the manual. If you pass the product on to a
third party, make sure to include this manual.
Preliminaries
Always make sure the appliance is unplugged from the mains
when cleaning, attaching or removing accessories
4: Place the metal chopping blade
(or the plastic blade) over the
motor shaft and check it is secure.
You may now place ingredients
into the bowl or wait until the lid is
in place and insert them through
the feed tube.
5: Place the lid on the bowl. Turn
the lid clockwise (to the left) and
lock it firmly into position.
If the bowl and the lid are not
securely locked the appliance will
not operate. This is a safety
feature
Food Processor User Guide
Lid
Mixing Bowl
Speed
Control
Feed Tube
Pusher
Handle
Motor
4
Assembling your processor for slicing or grating
Ensure the appliance is disconnected
from the mains.
7: Place the motor unit on a solid level
surface and press down to attach the
rubber feet to the work top. Place the
bowl on the motor base and then turn
the bowl clockwise until it is locked onto
the motor base. The ‘LOCK’ icon on the
base should align with the mark on the
bowl.
8: Place the motor shaft over the boss in
the Bowl. Rotate the shaft slightly to
engage with the motor and drop it into
place.
S Blade
S Blade Protector
Motor
Shaft
Plastic Blade
Plate
Holder
Fine
Grating Plate
Slicing
Plate
Coarse
Grating Plate
Fine Slicing
Plate
Assembling the Processor for normal use
Ensure the appliance is disconnected from the mains.
1: Place the motor unit on a solid level surface and press down to attach the rubber feet to the work top. Place the bowl on the
motor base and then turn the bowl clockwise until it is locked onto the motor base. The ‘LOCK’ icon on the base should align
with the mark on the bowl.
2: Place the motor shaft over the boss in the Bowl. Rotate the shaft slightly to engage with the motor and drop it into place.
3: Remove the ‘S’ blade protector as shown.
Hold the protective cover at the bottom and
carefully manoeuvre it off. Remember not to
touch the blade edges which are very sharp!
2
13
LOCK
5
8
7
6a 6b 6c
