INSTRUCTIONS FOR USE
Rotate the temperature control dial (18) of the iron until the indicator (17) corresponds
to the temperature suitable for the type of fabric to iron (refer to table in g. 3).
ENGLISH
HOW TO FILL THE BOILER WITH WATER
• Always make sure the plug is disconnected from the power outlet when executing
this operation.
• Before every use, place the appliance on a at, stable and heat-resistant surface.
• Unscrew the cap (7) in a counter clockwise direction keeping it pressed downwards
and slowly pour the water into the boiler opening.
• Screw in a clockwise direction.
ATTENTION!
Only ll the boiler with tap water: never add detergents, perfuming substances or
chemical additives.
HOW TO START
• Rest the iron on the base (8) of the boiler section.
• Turn the temperature control dial (18) of the iron to the “Steam Ironing” position (refer
to table in gure 3).
• Completely unwind the power cord (11) and insert the plug into the power outlet.
• The indicating light (3 ) of the boiler section will turn on and will remain on as long
as the power cord is connected to the electricity outlet.
• Turn the selector dial (2) on the iron+boiler position to turn the appliance on.
• The indicating light (19) of the iron will immediately turn on. It will turn o when the
selected temperature is reached, which usually takes a few minutes.
• When the light (4 ) turns on, the appliance is ready to produce steam.
ATTENTION!
Never unscrew the boiler cap (7) when the appliance is running.
Do not leave the appliance unattended when connected to the mains power supply.
Make sure the boiler section is resting on a stable surface before placing the iron on
top. Do not use the iron if it has been dropped, if there are signs of damage or if water
leaks from the soleplate.
IRONING
• Press the key (15) on the iron to dispense steam: release the steam button to stop
the steam ow.
• During use, the iron light (19) and the boiler light (4 ) will turn on, and will
automatically turn o to indicate that the soleplate is being kept at a constant
temperature.
• During ironing pauses, rest the iron on the base (8) of the boiler section.
• Position the iron vertically at a distance of 10/20 cm to dispense steam for “reviving”
and freshening hanging fabrics.
• Before ironing delicate fabrics, test the material in a hidden part of the garment, e.g.
the cu.
• First iron fabrics that require low temperatures, then move onto more resistant fabrics
that require high temperatures.
• To use the continuous steam function, press the button (15) on the iron and push the
cursor (16) towards the handle. To turn o this function, move the cursor (16) in the
opposite direction of the handle.
• The amount of steam you want to use during ironing can be set via the steam control
dial (6): turn the dial in a clockwise direction to increase the steam, turn the dial in a
counter clockwise direction to decrease the steam.
ADJUSTING TEMPERATURE OF THE IRON
FOR STEAM IRONING
