742934
10
Verklein
Vergroot
Pagina terug
1/135
Pagina verder
Wireless AC1750 Dual-band Gigabit Router
0
Wireless AC1750 Dual-band Gigabit Router
1
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names
mentioned herein are the trademarks or registered trademarks of
their respective holders. Copyright of the whole product as
integration, including its accessories and software, belongs to
Shenzhen Tenda Technology Co., Ltd. Without prior expressed
written permission from Shenzhen Tenda Technology Co., Ltd,
any individual or party is not allowed to copy, plagiarize,
reproduce, or translate it into other languages.
All photos and product specifications mentioned in this manual
are for references only. Upgrades of software and hardware may
occur; Tenda reserves the right to revise this publication and to
make changes in the content hereof without obligation to notify
any person or organization of such revisions or changes. If you
would like to know more about our product information, please
visit our website at http://www.tendacn.com.
Wireless AC1750 Dual-band Gigabit Router
2
TABLE OF CONTENTS
TABLE OF CONTENTS ..................................................................................................2
CHAPTER 1 PRODUCT OVERVIEW .............................................................................5
1.1 WHAT IT DOES .........................................................................................................5
1.2 FEATURES ..............................................................................................................5
CHAPTER 2 QUICK INTERNET CONNECTION SETUP ...............................................7
2.1 PACKAGE CONTENTS ..............................................................................................7
2.2 MINIMUM SYSTEM REQUIREMENTS: ..........................................................................7
2.3 HARDWARE INSTALL ................................................................................................8
2.4 WEB UTILITY LOGIN .............................................................................................. 11
2.5. INTERNET CONNECTION SETUP ............................................................................. 14
2.6 VERIFY INTERNET CONNECTION SETTINGS ............................................................. 15
2.7 WIRELESS SETTINGS ............................................................................................. 19
2.7.1 Wireless-Basic Settings ............................................................................... 19
2.7.2 Wireless-Security Settings ........................................................................... 20
2.8 CONNECT TO DEVICE WIRELESSLY ......................................................................... 21
CHAPTER 3 RUNNING STATUS .................................................................................. 24
3.1 WAN STATUS ....................................................................................................... 25
3.2 LAN STATUS ........................................................................................................ 27
3.3 WIRELESS STATUS ................................................................................................ 27
3.4 SYSTEM INFO........................................................................................................ 29
CHAPTER 4 NETWORK ............................................................................................... 29
4.1.LAN SETTINGS ..................................................................................................... 30
4.2.WAN SETTINGS .................................................................................................... 31
4.3 DHCP SERVER ..................................................................................................... 38
4.4 DHCP CLIENTS .................................................................................................... 40
4.5 STATIC ASSIGNMENT ............................................................................................. 40
4.6 MAC CLONE ........................................................................................................ 41
4.7 PORT MODE ......................................................................................................... 42
Wireless AC1750 Dual-band Gigabit Router
3
CHAPTER 5 SECURITY ............................................................................................... 44
5.1 IP GROUP ............................................................................................................ 44
5.2 TIME GROUP......................................................................................................... 45
5.3 CLIENT FILTER ...................................................................................................... 46
5.4 URL FILTER .......................................................................................................... 52
5.5 MAC FILTER ......................................................................................................... 55
5.6 REMOTE WEB MANAGEMENT ................................................................................. 59
CHAPTER 6 ADVANCED ............................................................................................. 61
6.1 VIRTUAL SERVER .................................................................................................. 61
6.2 DMZ .................................................................................................................. 64
6.3 UPNP .................................................................................................................. 65
6.4 DDNS ................................................................................................................. 66
6.5 ROUTING .............................................................................................................. 69
6.6 STATIC ROUTING ................................................................................................... 69
6.7 BANDWIDTH SETTINGS .......................................................................................... 70
CHAPTER 7 WIRELESS SETTINGS ............................................................................ 71
7.1 BASIC SETTINGS ................................................................................................... 72
7.2 WIRELESS SECURITY ............................................................................................ 76
7.3 WPS ................................................................................................................. 81
7.4 WDS ................................................................................................................. 83
7.5 GUEST NETWORK ................................................................................................. 85
7.6 WIRELESS ACCESS CONTROL ................................................................................ 86
7.7 CONNECTION LIST ................................................................................................. 88
7.8 ADVANCED SETTINGS ............................................................................................ 88
CHAPTER 8 USB .......................................................................................................... 90
8.1 USB STORAGE ..................................................................................................... 90
8.2 USB PRINTING ..................................................................................................... 93
8.3 DLNA ................................................................................................................ 101
CHAPTER 9 IPTV ....................................................................................................... 102
CHAPTER 10 TOOLS ................................................................................................. 105
Wireless AC1750 Dual-band Gigabit Router
4
10.1 TIME & DATE .................................................................................................... 106
10.2 FIRMWARE UPDATE ........................................................................................... 107
10.3 BACKUP & RESTORE ......................................................................................... 108
10.4. RESTORE TO DEFAULT ...................................................................................... 108
10.5 USER NAME & PASSWORD ................................................................................. 109
10.6 REBOOT ........................................................................................................... 109
10.7 STATISTICS ....................................................................................................... 110
10.8 LOG ................................................................................................................. 111
APPENDIX 1 CONFIG TCP/IP SETTINGS ................................................................. 111
APPENDIX 2 GLOSSARY .......................................................................................... 119
APPENDIX 3 TROUBLESHOOTING .......................................................................... 125
APPENDIX 4 REMOVE WIRELESS NETWORK FROM YOUR PC ........................... 128
APPENDIX 5 SAFETY AND EMISSION STATEMENT ............................................... 131
Wireless AC1750 Dual-band Gigabit Router
5
CHAPTER 1 PRODUCT OVERVIEW
1.1 What it does
Thanks for purchasing this Tenda W1800R Wireless AC1750
Dual-band Gigabit Router! The Tenda W1800R is a 5th
generation dual-band Wi-Fi router that delivers wireless speeds
up to 1750Mbps, currently the fastest available. Compatible with
next generation WiFi devices and backward compatible with
802.11 a/b/g and n devices, it enables HD streaming throughout
your home. The W1800R with simultaneous dual band WiFi
technology offers speeds up to 450+1300Mbps and avoids
interference, ensuring top WiFi speeds and reliable connections.
This makes it ideal for larger homes with multiple devices. In
addition, four Gigabit Ethernet ports offer ultra-fast wired
connections. Wirelessly access and share USB hard drive and
USB printer using the two USB 2.0 ports. Plus, the DLNA media
server feature enables sharing of digital media such as music,
photos and videos between consumer devices such as
computers, TVs, printers, cameras, cell phones, and other
multimedia devices.
1.2 Features
2.4GHz: IEEE802.11n, IEEE802.11g, IEEE 802.11b;
5GHz: IEEE 802.11n, IEEE 802.11a, IEEE 802.11ac;
IEEE802.3, IEEE802.3u;
Wireless AC1750 Dual-band Gigabit Router
6
Operate in 2.4GHz and 5GHz wireless bands
simultaneously;
Wireless rate up to1.3Gbps;
1 * Gigabit WAN port for Internet connection;
3 * Gigabit LAN ports for LAN connection; 1* IPTV port for
IPTV service;
2* USB ports for storage or wireless printing service sharing;
Support DLNA media server;
3* high gain external antennas;
WDS support for extending existing wireless coverage;
Supports WEP, WPA-PSK, WPA2-PSK and Mixed
WPA/WPA2-PSK encryption methods to secure your
wireless network;
Hidden/invisible SSID;
MAC-based wireless access control;
WPS one-touch encryption;
Provides Wireless guest network feature;
WMM streams your video and audio;
Combines the function of a wireless AP, router, switch and
firewall;
Provides Internet connection types: Dynamic/ static
IP,L2TP,PPTPPPPOE/ PPPOE dual access;
Built-in firewall supports domain name/MAC address filter
SNTP to synchronize local time with Internet time servers;
Wireless AC1750 Dual-band Gigabit Router
7
Bandwidth control;
Supports UPnP and DDNS features;
Provides virtual server and DMZ features;
Provides logs to record device's usage status;
CHAPTER 2 QUICK INTERNET CONNECTION
SETUP
2.1 Package Contents
Unpack the box and verify the following items:
W1800R Wireless AC1750 Dual-band Gigabit Router;
Power Adapter
Quick Install Guide
Resource CD
3* 5dBi omni-directional antennas
Ethernet Cable
If any of the above items are incorrect, missing, or damaged,
please contact your Tenda reseller for immediate
replacement.
2.2 Minimum System Requirements:
200MHz or better CPU
64MB or larger memory
Windows 98/2000/XP/Vista/7
Installed Network Adapter
Internet Explorer 6.0 or higher
Wireless AC1750 Dual-band Gigabit Router
8
Netscape Navigator 4.7 or higher
Broadband Internet Service (through xDSL/Cable
Modem/Ethernet)
2.3 Hardware Install
1. Connect one end of the included power adapter to the Device
and plug the other end into a wall outlet nearby. (Using a power
adapter with a different voltage rating than the one included with
the Device will cause damage to the Device.)
2. Connect one of the LAN ports on the Device to the NIC port on
your PC using an Ethernet cable.
Wireless AC1750 Dual-band Gigabit Router
9
3. Connect the Ethernet cable from your ISP side to device's
WAN port.
4. Observe status of LEDs on the device and ensure that they
are functioning correctly as stated in the table below.
Front Panel:
LED Overview:
LED
Icon
Status
Description
Power
Solid
Indicates a proper connection
to the power supply
Sys
Blinking
Indicates system is functioning
properly
USB
Solid
USB port connected correctly
Wireless AC1750 Dual-band Gigabit Router
10
WAN
Solid
WAN port connected correctly
Blinking
WAN port is transferring data
LAN
1/2/3
Solid
LAN port connected correctly
Blinking
LAN port is transferring data
IPTV
Solid
IPTV port connected correctly
Blinking
IPTV port is transferring data
2.4G
Solid
2.4G wireless radio is on
Blinking
Data being transferred over
2.4G wireless network
5G
Solid
5G wireless radio is on
Blinking
Data being transferred over 5G
wireless network
WPS
Blinking
Device is performing WPS
authentication on a client
device.
Off
WPS function is disabled or
WPS authentication
negotiation is completed
Back Panel:
Wireless AC1750 Dual-band Gigabit Router
11
1) USB: USB port for connection to a USB device such as a
USB printer or storage device;
2) WAN: Internet port RJ-45for connection to an
Internet-enabled xDSL Modem/Cable Modem or existing
Ethernet;
3) LAN/1/2/3: 3 LAN ports RJ-45 for connection to PC’s NIC
or uplink to a hub, switch or wireless AP;
4) IPTVIPTV port for connection to a network set-top box.
However such port can function as a LAN port if IPTV STB
port is not enabled;
5) WPS/Reset: WPS/Reset button; the WPS LED will display a
blinking light if you enabled the WPS function from device
web utility. Pressing this button for about 7 seconds restores
the Device to factory defaults.
2.4 Web Utility Login
The device’s default IP is 192.168.0.1. You can change it to
accommodate your own needs. Here in this manual, we use the
default IP.
Connect you PC to the Device and config your PC’s TCP/IP
settings following instructions in appendix 1 hereto. And then do
as follows to run a Ping command to test connectivity between
your PC and the Device.
Click "Start"-> "Run", input "cmd" and press "Enter".
Wireless AC1750 Dual-band Gigabit Router
12
Enter “ping 192.168.0.1” and press “Enter”. If you see the
following screen, it means the router is reachable on your
PC. If you don’t get the following screen, verify router’s
power supply, Ethernet cable connections and your PC’s
TCP/IP settings.
Login to Web Utility
Wireless AC1750 Dual-band Gigabit Router
13
Launch a web browser, in the address bar,input 192.168.0.1 and
press “Enter”.
When connected to the Device successfully, you shall see
the login window below. Enter user name and password in
corresponding fields on window below (Default user name and
password are respectively set to admin).
Note:
For security purpose, please change the default user name and
password after you logged in to web utility.
You will see the following interface if you entered a correct user
name and a correct password.
Wireless AC1750 Dual-band Gigabit Router
14
2.5. Internet Connection Setup
There are 2 Internet connection types on home page: PPPoE
and DHCP.
If you used to create a broadband connection on your PC that is
directly connected to a modem and provide a user name and a
password for Internet access, then select PPPoE, enter the user
name and password and then click OK.
Wireless AC1750 Dual-band Gigabit Router
15
If you used to access Internet simply by connecting your PC
directly to the modem with no need to configure any settings on
your PC. Then select DHCP, enter a security key and then click
OK.
Note:
DHCP is the default Internet connection type. If you need other
connection types, please go to Chapter 4> WAN settings.
2.6 Verify Internet Connection Settings
After finishing settings on home page, click the Advanced button
from right top corner there and then click Running Status-> WAN
Status to check the Internet connection status.
A. If you find "Connected" and a WAN IP address displayed
there (as shown below), you can now connect to the device
using an Ethernet cable to access Internet.
Wireless AC1750 Dual-band Gigabit Router
16
B. If "Disconnected" (or "Not connected") and no WAN IP
address are displayed (as seen below), connection between
the Internet-enabled modem (or broadband service) and your
device may have failed. Please double check or re-connect all
involved devices and cables properly and then refresh the
page. If nothing is wrong, "Connecting" or "Connected" will be
displayed.
Wireless AC1750 Dual-band Gigabit Router
17
C. If "Connecting" is displayed and no WAN IP address is
seen, try refreshing the page five times. And if it still displays
"Connecting" try the following steps:
a. Click the Network menu and then click "MAC Clone". On
the MAC Clone interface, click on the "Clone MAC" button, and
then click "Save". Settings will take effect after device reboot.
Wireless AC1750 Dual-band Gigabit Router
18
b. Go back to the Status screen, refresh it a few times. If you find
"Connected" and a WAN IP address displayed there, you can
now connect to the device using an Ethernet cable to access
Internet. If you still see "Connecting" there, please click Tools->
Reboot to reboot the device.
c. After device reboot, go back to the Status screen, refresh it a
few times. If you find "Connected" and a WAN IP address
displayed there, you can now connect to the device using an
Ethernet cable to access Internet. If you still see "Connecting"
after trying above solutions, verify that your PC is able to access
Wireless AC1750 Dual-band Gigabit Router
19
Internet when it is directly connected to the modem and contact
our technical staff for help.
2.7 Wireless Settings
2.7.1 Wireless-Basic Settings
If you want to create a WLAN, simply click Wireless-> Basic
Settings. Please change the SSID Wireless Network name,
you can name it whatever you like. Leave other options
unchanged unless necessary and then click OK. You can also
change the SSID and channel settings for the 5G wireless
network if you like.
Wireless AC1750 Dual-band Gigabit Router
20
2.7.2 Wireless-Security Settings
If you want to encrypt your wireless network, click
Wireless-Wireless Security, select a band: 2.4G or 5G, and then
configure proper security settings. For example: Security Mode:
WPA-PSK; Cipher Type: AES; Security Key: enter down to 8
characters. And then click Save.
Wireless AC1750 Dual-band Gigabit Router
21
2.8 Connect to Device Wirelessly
Having finished above settings, you can search the device's
wireless network (SSID) from your wireless devices (notebook,
iPad, iPhone, etc) and enter a security key to connect to it
wirelessly. If you are using Windows 7 OS, do as follows:
A. Click Start and select Control Panel.
Wireless AC1750 Dual-band Gigabit Router
22
B. Click Network and Internet.
C. Click Network and Sharing Center.
D. Click Change adapter settings.
E. Select a desired wireless connection and click
Wireless AC1750 Dual-band Gigabit Router
23
Connect/Disconnect.
F. Select the desired wireless network, click Connect, enter the
security key and then click OK.
Wireless AC1750 Dual-band Gigabit Router
24
G. You can access Internet via the device when "Connected"
appears next to the wireless network name you selected.
CHAPTER 3 RUNNING STATUS
There are 4 subdues under the Status tab: "WAN Status", "LAN
Status", “Wireless Status" and "System Info", which are
explained in details below.
Wireless AC1750 Dual-band Gigabit Router
25
3.1 WAN Status
This section allows you to view WAN Status, Internet Connection
Type, WAN IP, Subnet Mask, Gateway, Primary DNS Server,
Secondary DNS Server, MAC Address, WAN Traffic and
Connection Duration. It also presents you a vivid impression of
WAN traffic usage in a graph.
Wireless AC1750 Dual-band Gigabit Router
26
WAN Status: Displays WAN connection status.
Cable improperly connected: Indicates that the Ethernet
cable from your ISP side is not correctly connected to the
WAN port on the Device or the Device is not logically
connected to your ISP.
Connecting: Indicates that the WAN port is correctly
connected and is requesting an IP address from your ISP.
Connected: Indicates that the router has been connected to
your ISP.
Internet Connection Type: Displays current Internet
connection type.
WAN IP: Displays WAN (Internet) IP address provided by
your ISP.
Subnet Mask: Displays WAN subnet mask provided by your
ISP.
Gateway: Displays WAN gateway address provided by your
ISP.
Primary DNS Server: Displays primary WAN DNS address
provided by your ISP.
Secondary DNS Server: Displays secondary WAN DNS
address (if any) provided by your ISP.
MAC Address: Displays WAN MAC address.
WAN Traffic: Displays current WAN uplink traffic and
downlink traffic.
Wireless AC1750 Dual-band Gigabit Router
27
Connect: Click to renew current IP address.
Disconnect: Click to release current IP address and Internet
connection will be disconnected.
3.2 LAN Status
This section displays information of device LAN IP Address,
Subnet Mask, LAN MAC Address, DHCP Server and NAT
Entries/NAT.
IP AddressDisplays current LAN IP address.
Subnet Mask: Displays current LAN subnet mask.
LAN MAC Address: Displays Device’s LAN MAC address.
DHCP Server: Displays whether DHCP server on the device
is enabled or not.
NAT Entries/NAT: Displays the number of NAT entries
already used and the number of NAT entries still available.
3.3 Wireless Status
This section displays the status of 2.4G Wireless radio and 5G
Wireless radio, Wireless MAC address, SSID, 802.11 Mode,
Wireless AC1750 Dual-band Gigabit Router
28
Country, Channel and Security Mode information.
Wireless Radio: Displays whether wireless is enabled or not.
Wireless MAC address: Displays the MAC address of the
Device’s wireless interface.
SSID: Displays current SSID.
802.11 Mode: Displays currently active network mode.
Country: Displays the country selected currently.
Channel: Displays the channel that device is currently
operating on.
Security Mode: Displays current security Mode.
Wireless AC1750 Dual-band Gigabit Router
29
3.4 System Info
This section displays current CPU usage, memory usage, up
time, system time, connected client(s) and firmware version info.
CPU Usage: Displays current CPU usage.
Memory Usage: Displays current memory usage.
Up Time: Displays the uptime since device is powered up.
Time: Displays Device’s current system time.
Connected Client(s): Displays the number of currently
connected clients.
Firmware VersionDisplays Device’s current firmware
version.
CHAPTER 4 NETWORK
Network includes the following five submenus: LAN Settings,
WAN Settings, DHCP Server, DHCP Clients, Static Assignment,
MAC Clone and Port Mode. Clicking any of them enters
corresponding interface for configuration. Below explains, in
Wireless AC1750 Dual-band Gigabit Router
30
details, each such feature.
4.1.LAN Settings
IP Address: Device’s LAN IP. The default is 192.168.0.1. You
can change it according to your need.
Subnet Mask: Device’s LAN subnet mask.
Wireless AC1750 Dual-band Gigabit Router
31
4.2.WAN Settings
There are 6 types of Internet connection: DHCP ( Dynamic IP),
PPPoE and PPPoE dual access, PPTP, L2TP and Static IP
available for your choice.
Interface: Displays the interface used currently;
Connection Status: Displays WAN current connection status:
Disconnected, Connecting or Connected.
Info: Displays the currently used Internet connection type,
gateway, IP address and subnet mask information.
1) DHCP: Select DHCP (Dynamic IP) to obtain IP Address info
automatically from your ISP. Select this option if your ISP does
not provide you with any IP info.
Internet connection Type: Displays a list of available Internet
Wireless AC1750 Dual-band Gigabit Router
32
connection types.
MTU: Maximum Transmission Unit. The default value
is1500.
2) Static IP: Select Static IP Address if your ISP provides all the
connection info. You will need to enter the provided IP address,
subnet mask, gateway address, and DNS address(es) in
corresponding fields.
Internet connection Type: Displays a list of available Internet
connection types.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Subnet mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.
Default Gateway: Enter the gateway address provided by
Wireless AC1750 Dual-band Gigabit Router
33
your ISP. Consult your local ISP if you are not clear.
Primary/Secondary DNS Server: Enter the Primary and
Secondary DNS Server Addresses. Consult your local ISP if
you are not clear.
MTU: Maximum Transmission Unit.The factory default is
1500.
3) PPPoE: Select PPPoE (Point to Point Protocol over Ethernet)
if your ISP uses a PPPoE connection and provides you with a
PPPoE user name and a PPPoE password. Simply enter them in
corresponding fields.
Internet connection Type: Displays a list of available Internet
connection types.
User Name: Enter the PPPoE User Name provided by your
ISP. Consult your ISP if you are not clear.
Password: Enter the PPPoE Password provided by your ISP.
Consult your ISP if you are not clear.
Wireless AC1750 Dual-band Gigabit Router
34
MPPE: Select whether to enable the MPPE authentication
method.
MTU: Maximum Transmission Unit.The factory default is
1492.
4) PPTP: Select PPTP (Point-to-Point-Tunneling Protocol) if your
ISP uses a PPTP connection. The PPTP connects a router to a
VPN server. For exampleA corporate branch and headquarter
can use this connection type to implement mutual and secure
access to each other’s resources.
Internet connection Type: Displays a list of available Internet
connection types.
PPTP Server: Enter the IP address of a PPTP server.
Wireless AC1750 Dual-band Gigabit Router
35
User Name: Enter your PPTP User Name.
Password: Enter your Password.
Address mode: Select “Dynamic” if you don’t get any IP info
from your ISP, otherwise select “Static”. Consult your ISP if
you are not clear.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Subnet Mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.
Default Gateway: Enter the gateway provided by your ISP.
Consult your local ISP if you are not clear.
Primary/Secondary DNS Server: Enter the Primary and
Secondary DNS Server Addresses. Consult your local ISP if
you are not clear.
MPPE: Select whether to enable the MPPE authentication
method.
MTU: Maximum Transmission Unit.The factory default is
1460.
5) L2TP: Select L2TP (Layer 2 Tunneling Protocol) if your ISP
uses an L2TP connection. The L2TP connects your router to a
L2TP server. For exampleA corporate branch and
headquarter can use this connection type to implement mutual
and secure access to each other’s resources.
Wireless AC1750 Dual-band Gigabit Router
36
Internet connection Type: Displays a list of available Internet
connection types.
L2TP Server: Enter the L2TP IP address provided by your
ISP.
User Name: Enter your L2TP User Name.
Password: Enter your Password.
Address mode: Select “Dynamic” if you don’t get any IP info
from your ISP, otherwise select “Static”. Consult your ISP if
you are not clear.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Default Gateway: Enter the gateway provided by your ISP.
Wireless AC1750 Dual-band Gigabit Router
37
Consult your local ISP if you are not clear.
Primary/Secondary DNS Server: Enter the Primary and
Secondary DNS Server Addresses. Consult your local ISP if
you are not clear.
MTU: Maximum Transmission Unit. The factory default is
1458.
PPPoE Dual Access: Select PPPoE (Point to Point Protocol
over Ethernet) Dual Access if your ISP uses a PPPoE Dual
Access connection and provides you with a PPPoE user
name and a PPPoE password. Simply enter them in
corresponding fields. In the mean time, you can also use
static address mode or dynamic address mode for MAN
access.
Internet connection Type: Displays a list of available Internet
connection types.
Wireless AC1750 Dual-band Gigabit Router
38
User Name: Enter the PPPoE User Name provided by your
ISP. Consult your ISP if you are not clear.
Password: Enter the PPPoE Password provided by your ISP.
Consult your ISP if you are not clear.
Address mode: Select “Dynamic” if you don’t get any IP info
from your ISP, otherwise select “Static”. Consult your ISP if
you are not clear.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Subnet mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.
Default Gateway: Enter the gateway address provided by
your ISP. Consult your local ISP if you are not clear.
MPPE: Select whether to enable the MPPE authentication
method.
MTU: Maximum Transmission Unit.The factory default is
1492.
Note:
It is not advisable to change the factory default MTU value unless
necessary as an improper MTU value may degrade your network
performance or even lead to network malfunction.
4.3 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is an
Wireless AC1750 Dual-band Gigabit Router
39
automatic configuration protocol used on IP networks. If you
enable the built-in DHCP server on this device, it will
automatically configure TCP/IP protocol settings for all
DHCP-Client-enabled PCs in your LAN, including IP address,
subnet mask, gateway and DNS etc.
DHCP Server: Select whether to enable or disable the
Device’s DHCP server feature.
Start IP: Enter the starting IP address for the DHCP server’s
IP assignment.
End IP: Enter the ending IP address for the DHCP server’s
IP assignment.
Lease Time: The length of time for the IP address lease.
Primary DNS Server: Specify a primary DNS server address
that will be assigned to DHCP clients upon request.
Secondary DNS Server: Specify a secondary DNS server
address that will be assigned to DHCP clients upon request.
Wireless AC1750 Dual-band Gigabit Router
40
Note:
To apply the DHCP server settings to all PCs on your LAN, you
must set all PCs to "Obtain an IP address automatically" and
"Obtain DNS server address automatically" respectively.
4.4 DHCP Clients
This section displays a DHCP dynamic client list, which includes
host name, IP address, MAC address and lease time info.
Host name: Displays clients' host names.
IP Address: Displays IP address(s) that client(s) obtained
from the DHCP server.
MAC Address: Displays MAC address of a given host.
Lease Time: Remaining time for a corresponding IP address
lease.
4.5 Static Assignment
The DHCP server provides DHCP static IP address reservation
feature. If you would like some devices on your network to
always have fixed IP addresses, you can use this feature and
manually add a static DHCP assignment entry for each such
device.
Wireless AC1750 Dual-band Gigabit Router
41
For example: If you want a PC at the MAC address of
00:15:58:C0:D4:3F (on your internal network) to always receive
the IP address of 192.168.0.150 from the device's DHCP server.
First, enter the IP address and MAC address in corresponding
fields as seen below. Second, click Add and Save to save your
settings.
IP Address: Enter the IP address for static DHCP
assignment.
MAC Address: Enter the MAC address of a computer to
always receive the same IP address you specify.
Add: Click it to add a new IP-MAC static assignment entry to
list.
Edit: Click it to change an existing entry.
Delete: Click to remove an existing entry.
4.6 MAC Clone
This section allows you to configure Device’s WAN MAC
address.
Wireless AC1750 Dual-band Gigabit Router
42
WAN MAC Address: Config Device’s WAN MAC address.
Restore to Factory Default MAC: Reset Device’s WAN MAC
to factory default.
Clone MAC: Click to copy your PC's MAC address to the
WAN MAC Address field on the Device.
Note:
1. Normally you don't need to change the default WAN MAC
value. However, some ISP may bind client PC’s MAC address for
Internet connection authentication. In this case, simply enter
such MAC in the WAN MAC Address field or click the “Clone
MAC” button. Note that the WAN MAC address in "Status"
interface will be updated accordingly once you changed it.
2. Do remember to reboot the router to activate the new WAN
MAC. DO NOT use the “Clone MAC” feature unless required by
your ISP.
3. Only the MAC addresses of the PCs on LAN can be cloned to
the Device.
4.7 Port Mode
This page lets you set speed and duplex mode for device's WAN
Wireless AC1750 Dual-band Gigabit Router
43
port. It is advisable to keep the default settings.
Auto: Keep the default of Auto, unless the cable to the WAN
port is excessively long, which may deduce drive capability.
10M full-duplex: Select to set WAN port to 10M full-duplex to
enhance the driving ability.
10M half-duplex: Select to set WAN port to 10M half-duplex.
If your WAN port is properly connected but does not function
correctly, it may be caused by poor driving capacity of the
cable. Please set the WAN port to 10M half-duplex to
improve drive capability.
100M full-duplex: Select to set WAN port to 100M
full-duplex.
100M half-duplex: Select to set WAN port to 100M
half-duplex.
1000M full-duplex: Select to set WAN port to 1000M
full-duplex.
1000M half-duplex: Select to set WAN port to 1000M
half-duplex.
Wireless AC1750 Dual-band Gigabit Router
44
CHAPTER 5 SECURITY
The "Security" tab includes 6 submenus: IP Group, Time Group,
Client Filter, URL Filter ,MAC Filter and Remote Web
Management. Clicking any of them enters corresponding
interface for configuration. Below explains, in details, each such
feature.
5.1 IP Group
Here you can set up a IP group and define a name for it or briefly
describe it. An IP group determines which IP address or IP
addresses specific rules of other related features are to be
enabled on.
Wireless AC1750 Dual-band Gigabit Router
45
Group Name: Define a name for a corresponding group.
Group Description: Briefly describe a corresponding group.
IP: Displays the added IP address or an IP range;
Add IP: Enter an identical IP address or two different IP
addresses in both fields and then click Add to add a single IP
address or a range of IP addresses.
Edit: Click to edit an existing IP address or IP range.
Delete: Click to delete an existing IP address or IP range.
Clear: Click to clear all info on the page.
5.2 Time Group
Here you can set up a time group and define a name for it or
briefly describe it. A time group determines when specific rules of
other related features are to take effect.
Wireless AC1750 Dual-band Gigabit Router
46
Group Name: Define a name for a corresponding group.
Group Description: Briefly describe a corresponding group.
To select a time or time group, simply click corresponding area.
5.3 Client Filter
To better manage PCs in LAN, you can allow or disallow
such PCs to access certain ports on Internet using the Client
Filter functionality. Before you can set up a client filter rule, you
must set an IP group and a time group.
Wireless AC1750 Dual-band Gigabit Router
47
Filter Mode: Select Deny or Allow.
Enable: Check to enable or uncheck to disable a
corresponding filter rule allow/disallow matched packets to
pass through router.
Description: Briefly describe the current rule.
IP Group: Select an IP group for the corresponding rule to
apply to.
Time Group: Select a time group for the corresponding rule
to apply to.
WAN Port Range: Enter TCP/UDP protocol port number (s);
it can be a range of ports or a single port.
Protocol: Select a protocol or protocols for the traffic
(TCP/UDP/Both).
All client filter rules will be summarized in a list.
Client Filter: Check to enable the feature.
Default: Default filter mode; select Allow or Deny from the
drop-down list. For example, if Deny is selected from the
Wireless AC1750 Dual-band Gigabit Router
48
Default drop-down list (i.e. default mode is "Deny Access to
Internet"), then all clients will be denied from accessing
Internet at any time. And if Deny is selected from the Filter
Mode drop-down list, then all clients will be denied from
accessing Internet at any time. However, if Allow is selected
from the Filter Mode drop-down list, then only clients whose
IP addresses are included in the specified IP group will be
allowed to access Internet during the time period specified
by the time group in the rule.
Example 1: To forbid PCs at the IP addresses between
192.168.0.100 and 192.168.0.150 inclusive from accessing
Internet at any time, do as follows:
Step 1. Set an IP group: 192.168.0.100-192.168.0.150.
Step 2. Set a time group: select "All".
Wireless AC1750 Dual-band Gigabit Router
49
Step 3. Set a client filter rule as shown below.
Step 4. Enable the Client Filter feature and select "Allow" from
the "Default" drop-down list as shown below.
Wireless AC1750 Dual-band Gigabit Router
50
Example 2: To allow only the PC at an IP address of 192.168.
0.145 to browse webpages from 8:00 to 1800, do as follows:
Step 1. Set an IP group: enter 192.168.0.145 in both fields.
Step 2. Set a time group: select "08"-"18" and "Mon"-"Sun".
Wireless AC1750 Dual-band Gigabit Router
51
Step 3. Set a client filter rule as shown below.
Step 4. Enable the Client Filter feature and select "Deny" from
the "Default" drop-down list as shown below.
Wireless AC1750 Dual-band Gigabit Router
52
5.4 URL Filter
To better control LAN PCs, you can use the URL filter
functionality to allow or disallow such PC to access certain
websites within a specified time range. Before you can set up a
URL filter rule, you must set an IP group and a time group.
Filter Mode: Select Deny or Allow.
Enable: Check to enable or uncheck to disable a
corresponding filter rule allow/disallow matched packets to
pass through router.
Description: Briefly describe the current entry/rule.
Wireless AC1750 Dual-band Gigabit Router
53
IP Group: Select a proper IP group for the corresponding
rule to apply to.
Time Group: Select a proper time group for the
corresponding rule to apply to.
URL String: Enter domain names or a part of a domain name
to be filtered out.
All rules will be summarized in a list.
URL Filter: Check to enable the feature.
Default: Default filter mode; select Allow or Deny from the
drop-down list. For example, if Deny is selected from the
Default drop-down list (i.e. default mode is "Deny Access to
Internet"), then all clients will be denied from accessing
Internet at any time. And if Deny is selected from the Filter
Mode drop-down list, then all clients will be denied from
accessing Internet at any time. However, if Allow is selected
from the Filter Mode drop-down list, then only clients whose
IP addresses are included in the specified IP group will be
allowed to access corresponding websites during the time
Wireless AC1750 Dual-band Gigabit Router
54
period specified by the time group in the rule.
If you want to disallow all computers on your LAN to access
Google and facebook from 800 to 1800 during working days
(Monday- Friday), then do as follows:
Step 1. Set an IP group: 192.168.0.2-192.168.0.254.
Step 2. Set a time group: select "08"-"18" and "Mon"-"Fri".
Step 3. Set a filter rule as shown below.
Wireless AC1750 Dual-band Gigabit Router
55
Step 4. Enable the URL Filter feature and select "Allow" from the
"Default" drop-down list as shown below.
Note:
Each entry can include up to 16 domain names, each of which
must be separated by " ".
5.5 MAC Filter
To better manage PCs in LAN, you may use the MAC
Address Filter function to allow/disallow such PCs to access to
Internet.
Wireless AC1750 Dual-band Gigabit Router
56
Filter Mode:
Deny Access to Internet: Disallow only specified packets to
access Internet; other packets are not restricted.
Allow Access to Internet: Allow only specified packets to
access Internet; other packets are denied.
Description: Briefly describe the current rule.
MAC: Specify the MAC address of the PC for the
corresponding rule to take effect. MAC Address list: Displays
MAC addresses of all clients connected to the device.
Simply select the desired MAC address and add it to the
MAC field. Or you can also add it manually.
Time: Specify a time range for a current rule to take effect.
Day: Select a day or several days for a current rule to take
effect.
Wireless AC1750 Dual-band Gigabit Router
57
All rules will be summarized in a list.
MAC Filter: Check to enable the feature.
Default: Select Allow or Deny from the drop-down list. For
example, if Deny is selected from the Default drop-down list
(i.e. default mode is "Deny Access to Internet"), then all
clients at specified MAC addresses will be denied from
accessing Internet at any time. And if Deny is selected from
the Filter Mode drop-down list, then all clients at specified
MAC addresses will be denied from accessing Internet at
any time. However, if Allow is selected from the Filter Mode
drop-down list, then only clients at specified MAC addresses
will be allowed to access Internet during the time period
specified by the time group in the rule.
Example1: To prevent a PC at the MAC address of
00:E0:4C:69:A4:10 from accessing Internet between 8:00
and16:00 during working days (Monday -Friday). Do as follows:
Step 1. Set a MAC filter rule as shown below.
Step 2. Enable the MAC Filter feature and select "Allow" from the
Wireless AC1750 Dual-band Gigabit Router
58
"Default" drop-down list as shown below.
Example2: To allow a PC at the MAC address of
00:E4:A5:44:35:69 to access Internet from Monday to Friday. Do
as follows:
Step 1. Set a MAC filter rule as shown below.
Step 2. Enable the MAC Filter feature and select "Deny" from the
"Default" drop-down list as shown below.
Wireless AC1750 Dual-band Gigabit Router
59
5.6 Remote Web Management
The Remote Web management allows the Router to be
configured from the Internet by a web browser.
Enable: Select whether to enable the Remote Web-based
Management feature.
IP Address: Enter a trusted IP address of a PC from Internet
or other external networks which you want to authorize to
manage the device remotely via a web browser.
Port: Remote admin port; the port used by trusted hosts from
Wireless AC1750 Dual-band Gigabit Router
60
Internet or other external networks to access and manage
the device remotely via a web browser.
For example: If you want to allow only the PC at the IP address of
218.88.93.33 from Internet to access Device’s web-based utility
via port: 8080, then configure the same settings as shown on the
screenshot below on your Device.
Note:
1. To access the device via port 8080, enter "http://x.x.x.x:8080"
where "x.x.x.x" represents the the device's Internet IP address
and 8080 is the remote admin port. Assuming the device's
Internet IP address is 220.135.211.56, then, simply replace the
"x.x.x.x" with "220.135.211.56" (namely,
http://220.135.211.56:8080).
Leaving the IP address field at "0.0.0.0" makes the device
remotely accessible to all the PCs on Internet or other external
networks; populating it with a specific IP address, say,
218.88.93.33, makes the device only remotely accessible to the
PC at the specified IP address.
Wireless AC1750 Dual-band Gigabit Router
61
CHAPTER 6 ADVANCED
The "Advanced" tab includes the following 7 submenus:Virtual
Server, DMZ, UPnP, DDNS, Routing, Static Routing and
Bandwidth Settings. Clicking any of them enters corresponding
interface for configuration. Below explains, in details, each such
feature.
6.1 Virtual Server
The Virtual Server feature grants Internet users access to
Wireless AC1750 Dual-band Gigabit Router
62
services on your LAN. It is useful for hosting online services such
as FTP, Web, or game servers. For each Virtual Server, you
define a WAN port on your router for redirection to an internal
LAN IP Address.
WAN Port: WAN service port;
LAN Port: LAN service port;
Private IP: The IP address of a computer used as a server in
LAN.
Protocol: Includes TCP, UDP and Both. Select “Both” if you
are not sure about which protocol to use.
Enable: The corresponding entry takes effect only if you
checked this option.
Well-Known Service Port: The “Well-Known Service Port”
lists widely used protocol ports. Simply select a port, an entry ID
and click the "Add to" button to populate the selected port to the
corresponding fields of the selected entry. In case that you don’t
find the port you need, enter it manually.
Wireless AC1750 Dual-band Gigabit Router
63
Example: You want to share some large files with your friends
who are not in your LAN; however it is not convenient to transfer
such large files across network. Then, you can set up your own
PC as a FTP server and use the Virtual server to let your friends
access these files. Assuming that the static IP address of the
FTP server (Namely, your PC) is 192.168.0.10, you want your
friends to access this FTP server on the default port of 21 using
the TCP protocol, then do as follows:
1. Enter 21 in both WAN Port and LAN Port fields or select FTP
from "Well-known Service Port" and an entry ID, 21 will be
automatically populated to corresponding fields of the selected
entry.
2. Enter 192.168.0.10 in the corresponding field, select "TCP"
and then check "Enable as seen below.
3. Click "Save" to save your settings.
Now, your friends only need to enter ftp://xxx.xxx.xxx.xxx:21 in
their browsers to access your FTP server. xxx.xxx.xxx.xxx is the
Wireless AC1750 Dual-band Gigabit Router
64
router's WAN IP address. Assuming it is 172.16.102.89, then
your friends need to enter "ftp://172.16.102.89: 21" in their
browsers.
Note:
If you include port 80 on this section, you must set the port for
remote (web-based) management to a different number than 80,
such as 8080, otherwise the virtual server feature may not take
effect.
6.2 DMZ
In some cases such as playing Internet games or holding video
conferences, you may need to have your computer completely
exposed to external networks for implementation of a
bidirectional communication. To do so, set it as a DMZ host. Note
that you should assign a static IP address to the PC designated
as a DMZ host (DHCP Server> DHCP Client List> DHCP
Reservation) before using the feature.
DMZ Host IP address: Enter the IP address of a computer
Wireless AC1750 Dual-band Gigabit Router
65
on your LAN which you want to set as a DMZ host. The DMZ
host should be connected to a LAN port on the Device.
Enable: Check/uncheck to enable/disable the DMZ host
feature.
Note:
1. Once enabled, the DMZ host will no longer be protected by
device's firewall and thus may become vulnerable to attacks.
2. Users on WAN access the DMZ host through a corresponding
WAN IP address.
6.3 UPnP
UPnP (Universal Plug and Play) allows a network device to
discover and connect to other devices on the network. With this
feature enabled, hosts in LAN can request the device to perform
special port forwarding so as to enable external hosts to access
resources on internal hosts.
Enable UPnP: Check/uncheck to enable/disable the UPnP
feature.
UPnP Mapping List: Displays info of external/internal port,
Wireless AC1750 Dual-band Gigabit Router
66
private (internal) IP, protocol and description, etc.
Note:
Note: UPnP works in Windows XP, Windows ME or later
(NOTE: Operational system needs to be integrated with or
installed with Directx 9.0) or in an environment with installed
application software that supports UPnP.
6.4 DDNS
Dynamic DNS or DDNS is a term used for the updating in real
time of Internet Domain Name System (DNS) name servers. We
use a numeric IP address allocated by Internet Service Provider
(ISP) to connect to Internet; the address may either be stable
("static"), or may change from one session on the Internet to the
next ("dynamic"). However, a numeric address is inconvenient to
remember; an address which changes unpredictably makes
connection impossible. The DDNS provider allocates a static
host name to the user; whenever the user is allocated a new IP
address this is communicated to the DDNS provider by software
running on a computer or network device at that address; the
provider distributes the association between the host name and
the address to the Internet's DNS servers so that they may
resolve DNS queries. Thus, uninterrupted access to devices and
services whose numeric IP address may change is maintained.
Wireless AC1750 Dual-band Gigabit Router
67
DDNS Settings: Enable/Disable the DDNS feature.
DDNS Server Provider: Select your DDNS service provider
from the drop-down menu.
User Name: Enter the DDNS user name registered with your
DDNS service provider.
Password: Enter the DDNS Password registered with your
DDNS service provider.
Domain Name: Enter the DDNS domain name with your
DDNS service provider.
Connection Status: Displays current status of connection
with the DDNS server.
Click "Save" to save your settings.
For example: If you have registered a DDNS service from
no-ip.com for a web server on the host at 192.168.0.10 and get
Wireless AC1750 Dual-band Gigabit Router
68
below info:
User Name
Tenda
Password
123456
Domain Name
tenda.zapto.org
First set a mapping rule on Virtual Server interface (For details,
see Virtual Server section) and then enter the registered user
name, password and domain name as shown below:
Click Save to save the settings. Simply input
"http://tenda.zapto.org" in a launched web browser and your web
server will be accessible.
Wireless AC1750 Dual-band Gigabit Router
69
6.5 Routing
This section displays the routing table content.
6.6 Static Routing
Use this section to customize static routes of data through your
network.
Destination Network: The IP address of a destination
network.
Subnet Mask: The Subnet Mask that corresponds to the
specified destination IP address.
Gateway: The IP address for next hop.
Wireless AC1750 Dual-band Gigabit Router
70
6.7 Bandwidth Settings
To better manage bandwidth allocation and optimize network
performance, use the Bandwidth Control feature.
Enable the bandwidth control feature, click Add and below
screen will appear:
Enable: Check/uncheck to enable/disable current entry.
When disabled, corresponding entry will not take effect
though existing in fact.
IP Range: Enter a single IP or an IP range.
Upstream Bandwidth Limit: Max uplink traffic.
Wireless AC1750 Dual-band Gigabit Router
71
Downstream Bandwidth Limit: Max downlink traffic.
P2P Download Control: Regulates P2P download rate to
ensure each user a guaranteed share of bandwidth.
Allocation Mode: Select either "Individual (Each member of
the IP range shall utilize the allocated bandwidth
individually)" or "Collective (All members of the IP range
shall share the allocated bandwidth collectively)";
Allocation Policy: Select either "Utilize only the allocated
bandwidth" or "Utilize more bandwidth if available".
Description: Briefly describe the current rule.
CHAPTER 7 WIRELESS SETTINGS
The "Wireless" tab includes 8 submenus: Basic Settings,
Wireless Security, WPS, WDS, Guest Network, Wireless Access
Control, Connection List and Advanced Settings. Clicking any of
them enters corresponding interface for configuration. Below
explains, in details, each such feature.
Wireless AC1750 Dual-band Gigabit Router
72
7.1 Basic Settings
This section allows you to manage your wireless network
(2.4G or 5G). You can select your country (Unavailable for 5G
wireless network), config wireless network name (SSID), network
mode and channel settings, etc the way you want.
Basic Settings--2.4G
Wireless AC1750 Dual-band Gigabit Router
73
Select 2.4G Basic Settings or 5GHz Basic Settings to
configure basic settings on corresponding band.
Country: Select your country from the drop-down list. There
are 11 options available.
2.4GHz Wireless Network: Check/uncheck to enable/disable
the 2.4GHz wireless feature. If disabled, all 2.4GHz-based
features will be disabled accordingly.
SSID Broadcast: This option is enabled By default. Select
“Enable”/“Disable” to make your wireless network visible/
invisible to any wireless clients within coverage when they
perform a scan to see what’s available. When disabled,
Wireless AC1750 Dual-band Gigabit Router
74
wireless clients will have to first know this SSID and
manually enter it on their devices if they want to connect to
the SSID.
SSID: A SSID (Service Set Identifier) is the unique name of
a wireless network.
802.11 Mode: Select a right mode according to your wireless
client. The default mode is 11b/g/n mixed.
Channel: For an optimal wireless performance, you may
select the least interferential channel. It is advisable that you
select an unused channel or “Auto” to let device detect and
select the best possible channel for your wireless network to
operate on from the drop-down list.
Channel Bandwidth: Select a proper channel bandwidth to
enhance wireless performance. When there are 11b/g and
11n wireless clients, please select the 802.11n mode of
20/40M frequency band; when there are only non-11n
wireless clients, select 20M frequency band mode; when the
wireless network mode is 11n mode, please select 20/40
frequency band to boost its throughput.
Extension ChannelAvailable only in 11b/g/n mixed mode.
WMM Capable: WMM is QoS for your wireless network.
Enabling this option may better stream wireless multimedia
data (such as video or audio).
ASPD CapableSelect to enable/disable the auto power
Wireless AC1750 Dual-band Gigabit Router
75
saving mode.
Basic Settings--5G
Select 2.4G Basic Settings or 5GHz Basic Settings to
configure basic settings on corresponding band.
5GHz Wireless Network: Check/uncheck to enable/disable
the 5GHz wireless feature. If disabled, all 5GHz-based
features will be disabled accordingly.
SSID Broadcast: This option is enabled By default. Select
“Enable”/“Disable” to make your wireless network visible/
invisible to any wireless clients within coverage when they
perform a scan to see what’s available. When disabled,
wireless clients will have to first know this SSID and
Wireless AC1750 Dual-band Gigabit Router
76
manually enter it on their devices if they want to connect to
the SSID.
SSID: A SSID (Service Set Identifier) is the unique name of
a wireless network; it is configurable.
802.11 Mode: Select a right mode according to your wireless
client. The default mode is 11a/n.
Channel: For an optimal wireless performance, you may
select the least interferential channel. It is advisable that you
select an unused channel or “Auto” to let device detect and
select the best possible channel for your wireless network to
operate on from the drop-down list.
Channel Bandwidth: Select a proper channel bandwidth to
enhance wireless performance. For best throughput, 80MHz
is recommended.
WMM Capable: WMM is QoS for your wireless network.
Enabling this option may better stream wireless multimedia
data (such as video or audio).
ASPD Capable: Select to enable/disable the auto power
saving mode. By default, this option is disabled.
7.2 Wireless Security
This section allows you to encrypt your wireless network to block
unauthorized accesses and malicious packet sniffing.
The security feature applies to both 2.4GHz wireless and 5GHz
Wireless AC1750 Dual-band Gigabit Router
77
wireless networks. Depending on which band your wireless
network is operating on, select the right option: 2.4G or 5G.
Six security modes are available: None (Disable), Open, Shared
and WPA-PSK, WPA2-PSK and Mixed WPA-PSK/WPA2-PSK.
1 Open
WEP is intended to provide data confidentiality comparable to
that of a traditional wired network.
Security Mode: Select a proper security mode from the
drop-down list.
Default Key: Select a key from the preset keys 1-4 for
Wireless AC1750 Dual-band Gigabit Router
78
current use.
2 Shared
WEP is intended to provide data confidentiality comparable to
that of a traditional wired network.
Security Mode: Select a proper security mode from the
drop-down list.
Encrypt Type: WEP by default.
Default Key: Select a key from the preset keys 1-4 for
current use.
3WPA-PSK
The WPA protocol implements the majority of the IEEE
802.11i standard. It enhances data encryption through the
Temporal Key Integrity Protocol (TKIP) which is a 128-bit
per-packet key, meaning that it dynamically generates a new key
for each packet. WPA also includes a message integrity check
feature to prevent data packets from being hampered with. Only
Wireless AC1750 Dual-band Gigabit Router
79
authorized network users can access the wireless network. WPA
adopts enhanced encryption algorithm over WEP.
Security Mode: Select a proper security mode from the
drop-down list.
Cipher Type: Select AES (advanced encryption standard) or
TKIP (temporary key integrity protocol) &AES.
Security Key: Enter a security key, which must be between
8-63 ASCII characters long.
Key Renewal Interval: Enter a valid time period for the key.
4WPA2-PSK
WPA2 is based on 802.11i and uses Advanced Encryption
Standard (AES) instead of TKIP. It is more secured than WPA
and WEP.
Wireless AC1750 Dual-band Gigabit Router
80
Security Mode: Select a proper security mode from the
drop-down list.
Cipher Type: Select AES (advanced encryption standard) or
TKIP (temporary key integrity protocol) &AES.
Security Key: Enter a security key, which must be between
8-63 ASCII characters long.
Key Renewal Interval: Enter a valid time period for the key.
3Mixed WPA/WPA2-PSK
Mixed WPA/WPA2-PSK provides both WPA-PSK
WPA2-PSK security modes with AES, TKIP and TKIP&AES
cipher types.
Wireless AC1750 Dual-band Gigabit Router
81
Security Mode: Select a proper security mode from the
drop-down list.
Cipher Type: Select AES (advanced encryption standard),
TKIP or TKIP (temporary key integrity protocol) &AES.
Security Key: Enter a security key, which must be between
8-63 ASCII characters long.
Key Renewal Interval: Enter a valid time period for the key.
7.3 WPS
Wi-Fi Protected Setup makes it easy for home users who know
little of wireless security to establish a secure wireless home
network, as well as to add new devices to an existing network
without entering long passphrases or configuring complicated
settings. Simply enter a PIN code or press the software PBC
button or hardware WPS button (if any) and a secure wireless
connection is established.
Wireless AC1750 Dual-band Gigabit Router
82
Enable WPS: Select to enable/disable the WPS encryption.
WPS Mode: Select PBC (Push-Button Configuration) or PIN.
Reset OOB: When clicked, the WPS LED turns off; WPS
function will be disabled automatically; WPS server on the
Router enters idle mode and will not respond to client’s WPS
connection request.
Operation Instructions:
PBC: (Before you start the following operations, make sure you
have enabled the WPS feature on the device from the web utility.)
Press the hardware WPS button on the device for 1 second and
if the WPS LED keeps blinking for about 2 minutes, it indicates
that PBC encryption mode is successfully enabled. And an
authentication will be performed between your device and the
other WPS/PBC-enabled wireless client during this time; if it
succeeds, the wireless client connects to your device, and the
WPS LED turns off. Repeat steps mentioned above if you want to
add more wireless clients to the device.
PIN: To use this option, you must know the PIN code from the
Wireless AC1750 Dual-band Gigabit Router
83
wireless client and enter it in the corresponding field on your
device while using the same PIN code on client side for such
connection.
Note: To use the WPS encryption, the wireless adapter must
be WPS-capable. The PIN code can be found on the label
attached to device.
7.4 WDS
WDS (Wireless Distribution System) feature can be used to
extend your existing 2.4G or 5G wireless network coverage.
Here we present you how to config such feature in 2.4GHz,
which also applies to 5GHz.
Select 2.4G WDS or 5G WDS.
WDS Mode: Select Disable or Repeater Mode.
AP MAC address: Displays the MAC address of the router
Wireless AC1750 Dual-band Gigabit Router
84
that is successfully bridged.
For example: select Repeater Mode and click Open Scan to scan
all available wireless networks (To ensure that both devices
involved communicate through the same channel, set the
channel to "Auto" before scanning.).
Simply check the wireless network you want to connect to. After
successfully completing settings on the Device, repeat above
operations on the other device. When the two devices added
each other's MAC address, the WDS may be implemented
successfully.
Note:
1. WDS feature can only be implemented between 2
WDS-capable wireless devices. Plus, SSID, channel, security
Wireless AC1750 Dual-band Gigabit Router
85
settings and security key must be exactly the same on both such
devices.
Note that you may need to change one of the router's LAN IP to
avoid an IP address collision. It is advisable to disable the DHCP
server on either of the two routers involved.
7.5 Guest Network
The Guest Network feature allows guests to access Internet and
other users on the guest network while disallowing them to
access Device web manager, users on master network and
clients behind the LAN ports. Thus the wireless master network
is secured. You can find the guest network available in both 2.4G
and 5G networks. Here we present you how to config such
feature on 2.4GHz band, which also applies to 5GHz.
Wireless AC1750 Dual-band Gigabit Router
86
Select 2.4GHz or 5GHz Guest Network.
Guest Network: Select to enable/disable the guest network
feature.
SSID Broadcast: This option is enabled By default. Select
“Enable”/“Disable” to make your wireless network visible/
invisible to any wireless clients within coverage when they
perform a scan to see what’s available. When disabled,
wireless clients will have to first know this SSID and
manually enter it on their devices if they want to connect to
the SSID.
AP Isolation: If enabled, clients connecting to the guest
network will be mutually inaccessible.
SSID A SSID (Service Set Identifier) is the unique name
of a wireless network.
Security Mode: Select a proper security mode to encrypt the
guest network. For details, see section 7.2 hereof.
7.6 Wireless Access Control
The MAC-based Wireless Access Control feature can be used to
allow or disallow clients to connect to your 2.4G or 5G wireless
network. Here we present you how to config such feature in
2.4GHz band, which also applies to 5GHz network.
Wireless AC1750 Dual-band Gigabit Router
87
Filter Mode:
Allow Access to Wireless Network: Allow only PCs at
specified MAC addresses to connect to your wireless
network.
Deny Access to Wireless Network: Block only PCs at
specified MAC addresses from connecting to your wireless
network.
MAC address: Specify the MAC address that is to be filtered
out.
Add: Click to add specified MAC address to the MAC list.
Example: To allow only the PC at the MAC address of
00:E8:C8:A4:56:75 to connect to your wireless network, do as
follows:
Wireless AC1750 Dual-band Gigabit Router
88
A. Enter 00:E8:C8:A4:56:75 in the MAC address field and then
click Add.
B. The MAC address will then be displayed in the MAC list. Now
click the Save button.
7.7 Connection List
This interface displays the information of currently connected
wireless clients (if any).
7.8 Advanced Settings
This section allows you to config advanced settings, including AP
Isolation, Beacon intervalFragment thresholdRTS threshold
Wireless AC1750 Dual-band Gigabit Router
89
and DTIM interval, etc, for both 2.4G and 5G wireless networks.
AP Isolation: Isolates clients connecting to master SSID.
Beacon Interval: A time interval between any 2 consecutive
Beacon packets sent by an Access Point to synchronize a
wireless network. Do NOT change the default value of 100
unless necessary.
Fragment Threshold: Specify a Fragment Threshold value.
Any wireless packet exceeding the preset value will be
divided into several fragments before transmission. DO NOT
change the default value of 2346 unless necessary.
RTS Threshold: If a packet exceeds such set value,
RTS/CTS scheme will be used to reduce collisions. Set it to
a smaller value provided that there are distant clients and
interference. For normal SOHO, it is recommended to keep
the default value unchanged; otherwise, device performance
may be degraded.
Wireless AC1750 Dual-band Gigabit Router
90
DTIM Interval: A DTIM (Delivery Traffic Indication Message)
Interval is a countdown informing clients of the next window
for listening to broadcast and multicast messages. When
such packets arrive at device’s buffer, the device will send
DTIM (delivery traffic indication message) and DTIM interval
to wake clients up for receiving these packets.
CHAPTER 8 USB
The Router provides two USB interfaces for USB device
connection. The "USB" tab includes three submenus: "USB
Storage" "USB Printer" and DLNA.
8.1 USB Storage
The storage sharing feature allows you to share files on the
storage device attached to the Device.
Wireless AC1750 Dual-band Gigabit Router
91
Enable: Check/uncheck to enable/disable storage sharing
feature.
Device Name: Define a meaningful name to you for the
device.
Workgroup: Define a work group name for the device.
Add: Click to add a user account. Up to 5 accounts can be
added.
Edit: Click to edit an existing account.
Delete: Click to delete an existing account.
Operation Instructions:
Before sharing files on a USB storage device, you must create a
user account.
1. Create account:
1). Click “Add” to display a dialogue box as seen below:
Wireless AC1750 Dual-band Gigabit Router
92
2) a. Enter a user name and a password, which will be used to
authenticate users trying to access the USB storage device for
sharing files. b. Re-type to confirm password. Click the “OK”
button and below screen will appear:
2. Set Access Right
Select a desired account, click Disk and select sda1 or sdb1.
Select a proper access right:
Read/WriteThe right to Read and Write.
Read: The right to Read.
Wireless AC1750 Dual-band Gigabit Router
93
No right: No right to share corresponding file.
Click “Save” to apply all settings.
3. Access shared file
To access resources on such storage device, double click “My
Computer” on your PC and enter \\192.168.0.1.
8.2 USB Printing
The USB printing service allows you to connect a USB printer to
the device and thus all clients on your network can print anything
they want on their PCs. The Router can identify a printer
automatically as long as it is successfully connected.
Wireless AC1750 Dual-band Gigabit Router
94
Enable Printer: Check/uncheck to enable/disable USB printing
service.
Operation Instructions:
1. Correctly connect your USB printer to the USB port on the
device.
2. Enable Printing Service
3. On your PC (connected to the device), click
“Start”——“Settings”——“Printers and Faxes” and select “Add a
printer” on appearing window.
Wireless AC1750 Dual-band Gigabit Router
95
4. Click “Next”.
Wireless AC1750 Dual-band Gigabit Router
96
5. Select “Local printer attached to this computer” and click
“”Next.
6. Select “Create a new port”, Type of port: “Standard TCP/IP
Wireless AC1750 Dual-band Gigabit Router
97
Port” and click “Next”.
7. Click “Next”.
8. Enter Router’s LAN IP address and click “Next”.
Wireless AC1750 Dual-band Gigabit Router
98
9. Click “Standard” under Device Type and select “Generic
Network Card”, then click “Next”.
Wireless AC1750 Dual-band Gigabit Router
99
10. Click “Finish”.
11. Select “Have Disk”.
Wireless AC1750 Dual-band Gigabit Router
100
12. Click “Browse”, select corresponding drive file and click
“Open”. At last click “OK”.
13. Click “Next”.
14. Define a name for the printer and click “Next”.
Wireless AC1750 Dual-band Gigabit Router
101
15. Click "Finish".
8.3 DLNA
The (DLNA) is responsible for defining interoperability guidelines
to enable sharing of digital media such as music, photos and
Wireless AC1750 Dual-band Gigabit Router
102
videos between consumer devices such as computers, TVs,
printers, cameras, cell phones, and other multimedia devices.
Enable: Check to enable the DLNA feature;
Media Server Name: This option is configurable. You can
change it according to your own needs.
For example: To play multimedia files that are stored on a USB
storage attached to the device on your smart phone. Do as
follows:
1. Connect the USB storage to the device.
2. Enable the DLNA feature on the device.
3. Change the DLNA server name if you like.
4. Start the DLNA client on your smart phone to perform a
scan.
5. Select a multimedia file to play on your smart phone.
CHAPTER 9 IPTV
The IPTV feature makes it possible to enjoy online videos on
your TV set via a set-top box while surfing Internet concurrently
without mutual interference.
Wireless AC1750 Dual-band Gigabit Router
103
Enable: Check/uncheck to enable/disable the IPTV feature.
Multicast IPTV is supported in this mode and IPTV port is
still functioning as a LAN port.
Enable IPTV STB Port: Check/uncheck to enable/disable
the IPTV-specific port. This mode applies to various forms of
IPTV and the IPTV port only provides IPTV service instead
of as a LAN port.
See below for the network topology:
Wireless AC1750 Dual-band Gigabit Router
104
Note:
1. If you enabled both options mentioned above, then note
below: (a). Set IPTV set-top box's connection type to
DHCP/dynamic IP or static IP (IMPORTANT: Note that the
set-top box's IP address should be on the same IP net
segment as router’s LAN IP.) if the set-top box is connected
to any port of LAN ports 1-3. (b). Select the dialup mode
provided by your ISP if the set-top box is connected to the
IPTV-specific port.
2. After the IPTV port is set for IPTV purpose, PC that connects
to such port will not be able to obtain an IP address or
access Internet. So think twice before you start. Plus, LAN
ports1-3 can only be used as LAN ports to connect PCs
instead of an IPTV set-top box.
Wireless AC1750 Dual-band Gigabit Router
105
3. The IPTV feature is currently not supported on WLAN.
CHAPTER 10 TOOLS
The "Tools" tab includes 8 submeus: Time & Date, Firmware
Update, Backup & Restore, Restore to Default, User Name &
Password, Reboot, Statistics and Log. Clicking any of them
enters corresponding interface for configuration. Below explains,
in details, each such feature.
Wireless AC1750 Dual-band Gigabit Router
106
10.1 Time & Date
This section lets you configure, update, and maintain the
correct time on the internal system clock. You can either select to
set the time and date manually or automatically obtain the GMT
time from Internet. Note that the GMT time is obtained only when
Device is connected to Internet. You can also configure the
system time manually.
Sync with Internet time servers: Time and date will be
updated automatically from Internet.
Sync Interval: Specify a time interval for periodical update of
time and date info from Internet.
Time Zone: Select your current time zone.
Copy Local Time: Click it to copy your PC’s time to the
device.
Wireless AC1750 Dual-band Gigabit Router
107
10.2 Firmware Update
Firmware upgrade is released periodically to improve the
functionality of your device and also to add new features. If you
run into a problem with a specific feature of the device, log on to
our website (www.tendacn.com) to download the latest firmware
to update your device.
To update firmware, do as follows:
1. Click "Browse” to locate and select the firmware file and
"Update” to update your Device.
2. Device restarts automatically when upgrade completes.
Note:
Note: DO NOT disconnect device from power supply or the
operating PC while update is in process, otherwise it may be
permanently damaged. When it is complete, the device will
reboot automatically. Update takes a few minutes. Please wait.
Wireless AC1750 Dual-band Gigabit Router
108
10.3 Backup & Restore
Backup settings: To backup settings, click the “Backup”
button and specify a directory to save settings to your local
hardware.
Restore settings: To restore settings, click Browse to locate
and select a configuration file and then click Restore.
10.4. Restore to Default
Click the "Restore to Factory Default" button to reset Device to
factory default settings.
Default IP Address: 192.168.0.1
Default Subnet Mask: 255.255.255.0
Default User Name: admin
Default Password: admin
Wireless AC1750 Dual-band Gigabit Router
109
10.5 User Name & Password
This section allows you to change login password and user name
for accessing Device’s Web-based management interface.
Both login password and user name are preset to “admin” by
default. To change either or both, do as follows: 1. Enter your
current user name and password in Old User Name and Old
Password fields. 2. Enter a new user name and a new password
in New User Name and New Password fields. 3. Click "Save”.
Note:
For security purpose, it is highly recommended that you change
the default login password and user name.
10.6 Reboot
This section allows you to reboot the device.
Wireless AC1750 Dual-band Gigabit Router
110
To restart your device, click the “Reboot” button. Following
screen will appear:
10.7 Statistics
Statistics displays current traffic of clients on your LAN.
Enable Traffic Statistics: Determine whether to enable the
Traffic Statistics feature on internal users.
Refresh: Click it to update statistic data.
Wireless AC1750 Dual-band Gigabit Router
111
Note:
Enabling the Traffic Statistics feature may degrade router’s
performance. So, do not enable it unless necessary.
10.8 Log
The Syslog option allows you to view all events that occur upon
system startup and check whether there is attack present in your
network. The logs are classified into 3 types: “All”, “System “and
“WAN”.
APPENDIX 1 CONFIG TCP/IP SETTINGS
If you are using Windows XP,do as follows:
1. From the PC you are currently using, click Start and select
Control Panel;
Wireless AC1750 Dual-band Gigabit Router
112
2. Click Network and Internet Connections.
Wireless AC1750 Dual-band Gigabit Router
113
3. Right-click on the Local .Area Connection and select
Properties.
Wireless AC1750 Dual-band Gigabit Router
114
4. Select Internet Protocol (TCP/IP) and click Properties.
5. Select "Obtain an IP address automatically" or "Use the
following IP address".
a. "Obtain an IP address automatically"
Wireless AC1750 Dual-band Gigabit Router
115
b. Use the following IP address"
IP address: Enter 192.168.0.xxx where xxx can be any number
between 2 and 254).
Subnet mask: Enter 255.255.255.0.
Default gateway: Enter 192.168.0.1.
Preferred DNS server: Set Preferred (Primary) DNS the same as
the LAN IP address of your Device (192.168.0.1) if you don’t
know your local DNS server address (Or consult your ISP). The
Alternate (Secondary) DNS is not needed or you may enter one
from your ISP.
Click OK twice to save your settings.
Wireless AC1750 Dual-band Gigabit Router
116
If you are using Windows 7, do as follows:
From the PC you are currently using, click Start-> Control
Panel-> Network and Internet-> Network and Sharing
Center-> Change adapter settings;
Right click “Local Area Connection” and select “Properties”.
Select "Internet Protocol Version 4 (TCP/IPv4)" and click
"Properties".
Wireless AC1750 Dual-band Gigabit Router
117
Select "Obtain an IP address automatically" or "Use the
following IP address".
a. "Obtain an IP address automatically"
Wireless AC1750 Dual-band Gigabit Router
118
b. Use the following IP address".
IP address: Enter 192.168.0.xxx where xxx can be any number
between 2 and 254). Subnet mask: Enter 255.255.255.0.
Default gateway: Enter 192.168.0.1.
Preferred DNS server: Set Preferred (Primary) DNS the same as
the LAN IP address of your Device if you don’t know your local
DNS server address (Or consult your ISP). The Alternate
(Secondary) DNS is not needed or you may enter one from your
ISP.
Click OK twice to save your settings.
In this section, we present you how to config your PC’s TCP/IP
settings.
Before you start, make sure your PC has an installed NIC. If not,
please install one first.
Wireless AC1750 Dual-band Gigabit Router
119
APPENDIX 2 GLOSSARY
DLNA
The (DLNA) is a non-profit collaborative trade organization
established by Sony in June 2003, that is responsible for defining
interoperability guidelines to enable sharing of digital media such
as music, photos and videos between consumer devices such as
computers, TVs, printers, cameras, cell phones, and other
multimedia devices. DLNA uses Universal Plug and Play (UPnP)
for media management, discovery and control.[4] UPnP defines
the type of device that DLNA supports ("server", "renderer",
"controller") and the mechanisms for accessing media over a
network. The DLNA guidelines then apply a layer of restrictions
over the types of media file format, encodings and resolutions
that a device must support.
11AC
IEEE 802.11ac is a wireless computer networking standard of
802.11, currently under development, providing high-throughput
wireless local area networks on the 5 GHz band. Theoretically,
the 802.11ac specification will enable multi-station WLAN
throughput of at least 1 gigabit per second and a maximum
single link throughput of at least 500 megabits per second (500
Mbit/s). This is accomplished by extending the air interface
concepts embraced by 802.11n: wider RF bandwidth (up to 160
MHz), more MIMO spatial streams (up to 8), multi-user MIMO,
Wireless AC1750 Dual-band Gigabit Router
120
and high-density modulation (up to 256 QAM).
Channel
Channel
A communication channel, also known as channel, refers either
to a physical transmission medium such as a wire or to a logical
connection over a multiplexed medium such as a radio channel.
It is used to transfer an information signal, such as a digital bit
stream, from one or more transmitters to one or more receivers.
If there is only one AP in the range, select any channel you like.
The default is Auto.
If there are several APs coexisting in the same area, it is
advisable that you select a different channel for each AP to
operate on, minimizing the interference between neighboring
APs. For example, if 3 American- standard APs coexist in one
area, you can set their channels respectively to 1, 6 and 11 to
avoid mutual interference. Frequency interference rarely exists
over 5 G band, which has more channels and greater frequency
span.
SSID
SSID
Service set identifier (SSID) is used to identify a particular 802.11
wireless LAN. It is the name of a specific wireless network. To let
Wireless AC1750 Dual-band Gigabit Router
121
your wireless network adapter roam among different APs, you
must set all Aps’ SSID to the same name.
WPA/WPA2
The WPA protocol implements the majority of the IEEE 802.11i
standard. It enhances data encryption through the Temporal Key
Integrity Protocol (TKIP) which is a 128-bit per-packet key,
meaning that it dynamically generates a new key for each packet.
WPA also includes a message integrity check feature to prevent
data packets from being hampered with. Only authorized network
users can access the wireless network.
The later WPA2 protocol features compliance with the full IEEE
802.11i standard and uses Advanced Encryption Standard (AES)
in addition to TKIP encryption protocol to guarantee better
security than that provided by WEP or WPA. Currently, WPA is
supported by Windows XP SP1.
PPPOE
The Point-to-Point Protocol over Ethernet (PPPoE) is a network
protocol for encapsulating PPP frames inside Ethernet frames.
Integrated PPP protocol implements authentication, encryption,
and compression functions that traditional Ethernet can not
provide and can also be used in the cable modem and digital
subscriber line (DSL) and Ethernet that provide access service to
Wireless AC1750 Dual-band Gigabit Router
122
the users. Essentially, it is a protocol that allows to establish a
point-to-point tunnel between two Ethernet interfaces within an
Ethernet broadcast domain.
DNS
The Domain Name System (DNS) is a hierarchical
distributed naming system for computers, services, or any
resource connected to the Internet or a private network. It
associates various information with domain names assigned to
each of the participating entities. A Domain Name Service
resolves queries for these names into IP addresses for the
purpose of locating computer services and devices worldwide.
An often-used analogy to explain the Domain Name System is
that it serves as the phone book for the Internet by translating
human-friendly computer hostnames into IP addresses.
WDS
A wireless distribution system (WDS) is a system enabling
the wireless interconnection of access points in an IEEE 802.11
network. It allows a wireless network to be expanded using
multiple access points without the traditional requirement for a
wired backbone to link them. All base stations in a wireless
distribution system must be configured to use the same radio
channel, method of encryption (none, WEP, or WPA) and the
same encryption keys. They may be configured to different
service set identifiers. WDS also requires every base station to
Wireless AC1750 Dual-band Gigabit Router
123
be configured to forward to others in the system. WDS may also
be considered a repeater mode because it appears to bridge and
accept wireless clients at the same time (unlike traditional
bridging).WDS may be incompatible between different products
(even occasionally from the same vendor) since it is not certified
by the Wi-Fi Alliance. WDS may provide two modes of wireless
AP-to-AP connectivity:• Wireless bridging, in which WDS APs
communicate only with each other and don't allow wireless
clients or stations (STA) to access them• Wireless repeating, in
which APs communicate with each other and with wireless STAs.
DMZ
In computer security, a DMZ (sometimes referred to as a
perimeter networking) is a physical or logical subnetwork that
contains and exposes an organization's external-facing services
to a larger untrusted network, usually the Internet. The purpose
of a DMZ is to add an additional layer of security to an
organization's local area network (LAN); an external attacker
only has access to equipment in the DMZ, rather than any other
part of the network. Hosts in the DMZ have limited connectivity to
specific hosts in the internal network, although communication
with other hosts in the DMZ and to the external network is
allowed. This allows hosts in the DMZ to provide services to both
the internal and external network, while an intervening firewall
controls the traffic between the DMZ servers and the internal
Wireless AC1750 Dual-band Gigabit Router
124
network clients. Any services such as Web servers, Mail servers,
FTP servers and VoIP servers, etc that are being provided to
users on the external network can be placed in the DMZ.
Wireless AC1750 Dual-band Gigabit Router
125
APPENDIX 3 TROUBLESHOOTING
This section provides solutions to problems that may occur
during installation and operation of the device. Read the
following if you are running into problems. If your problem is not
covered here, please feel free to go to www.tendacn.com to find
a solution or email your problems to support@tenda.com.cn
orsupport02@tenda.com.cn. We will be more than happy to help
you out as soon as possible.
1. Q: I entered the device’s LAN IP address in the web
browser but cannot access the utility. What should I do?
Check whether device is functioning correctly. The Sys LED
should blink a few seconds after device is powered up. If it does
not light up, then some internal faults may have occurred.
Verify physical connectivity by checking whether a corresponding
port’s link LED lights up. If not, try a different cable. Note that an
illuminated light does NOT ALWAYS indicate successful
connectivity.
Run the "ping 192.168.0.1" command. If you get replies from
192.168.0.1, open your browser and verify that Proxy server is
disabled. In case that ping fails, press and hold the
"WPS/RESET" button on your device for 7 seconds to restore
factory default settings, and then run "ping192.168.0.1" again.
4) Contact our technical support for help if the problem still exists
Wireless AC1750 Dual-band Gigabit Router
126
after you tried all the above.
2. Q: What should I do if I forget the login password to my
device?
A: Reset your device by pressing the WPS/Reset button for over
7 seconds. Note: All settings will be deleted and restored to
factory defaults once you pressed the WPS/Reset button.
3. Q: My computer shows an IP address conflict error after
having connected to the device. What should I do?
A: 1) Check if there are other DHCP servers present in your LAN.
If there are other DHCP servers except your router, disable them
immediately.
2) The default IP address of the device is 192.168.0.1; make
sure this address is not used by another PC or device. In case
that two computers or devices share the same IP addresses,
change either to a different address.
4. Q: I cannot access Internet and send/receive emails; what
should I do?
This problem mainly happens to users who use the PPPoE or
Dynamic IP Internet connection type. You need to change the
MTU size (1492 by default). In this case, go to “WAN Settings” to
change the MTU value from default 1480 to 1450 or 1400, etc.
5. Q: How do I share resources on my computer with users
on Internet through the device?
A: To let Internet users access internal servers on your LAN such
Wireless AC1750 Dual-band Gigabit Router
127
as e-mail server, Web, FTP, via the device, use the "Virtual
Server" feature. To do so, follow steps below:
Step 1: Create your internal server, make sure the LAN users can
access these servers and you need to know related service ports,
for example, port for Web server is 80; FTP is 21; SMTP is 25
and POP3 is 110.
Enter device web utility and click Virtual Server.
Step 3: Input the Start Port/External Port, say, 80.
Step 5: Input the internal server’s IP address. For example,
assuming that your Web server’s IP address is 192.168. 0.10,
then simply input it.
Select a proper protocol type: TCP, UDP, or Both depending on
which protocol(s) your internal host is using.
Click Enable and save your settings.
For your reference, we collected a list of some well-known
service ports as follows:
Server
Protocol
Service Port
Web Server
TCP
80
FTP Server
TCP
21
Telnet
TCP
23
NetMeeting
TCP
15031720
MSN Messenger
TCP/UDP
File
Send:6891-6900(TCP)
Voice:18636901(TCP)
Wireless AC1750 Dual-band Gigabit Router
128
Voice:18635190(UDP)
PPTP VPN
TCP
1723
Iphone5.0
TCP
22555
SMTP
TCP
25
POP3
TCP
110
APPENDIX 4 REMOVE WIRELESS NETWORK
FROM YOUR PC
If you change wireless settings on your wireless device, you
must remove them accordingly your PC; otherwise, you may
not be able to wirelessly connect to the device. Below describes
how to do remove a wireless network from your PC.
If you are using Windows XP, do as follows:
1. Right click "My Network Places" and select "Properties".
Wireless AC1750 Dual-band Gigabit Router
129
2. Click Wireless Network Connection and then select
Properties.
3. Click "Wireless Networks", select the item under "Preferred
networks" and then click the Remove button.
Wireless AC1750 Dual-band Gigabit Router
130
If you are using Windows 7, do as follows:
1. Click Network from your desktop and select Properties.
2. Select "Manage Wireless Networks".
3. Click the wireless connection and select "Remove network".
Wireless AC1750 Dual-band Gigabit Router
131
APPENDIX 5 SAFETY AND EMISSION
STATEMENT
NCC Notice
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使
用者均不得擅自變更頻率、加大功率或變更設計之特性及功能。
低功率射頻電機之作用不得影響飛航安全及幹擾合法通信;經發
現有幹擾現象時,應立即停用,並改善至無幹擾時方得繼續使
用。 前項合法通信,指依電信規定作業之無線電信。 低功率射
頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
備之幹擾。
5.25 ~ 5.35GHz 限室內使用 (802.11a used)
FCC Statement
Operations in the 5.15-5.25GHz band are restricted to indoor
usage only.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
Wireless AC1750 Dual-band Gigabit Router
132
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Wireless AC1750 Dual-band Gigabit Router
133
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
NOTE:
(1)The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment.
(2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable
CE Mark Warning
Wireless AC1750 Dual-band Gigabit Router
134
Operations in the 5.15-5.25GHz band are restricted to indoor
usage only.
This is a Class B product in a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures
NOTE:
(1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment.
(2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable
"The product can be used without restrictions in the following
countries: all EU member states except France and Norway.
The product can be used with limitations in the following
countries: France (for indoor use only) and Norway (20 km in the
center of Ny-Ĺlesund)."
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tenda W1800R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tenda W1800R in de taal/talen: Engels als bijlage per email.

De handleiding is 3,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info