742909
87
Verklein
Vergroot
Pagina terug
1/177
Pagina verder
User Guide
139
the member port that corresponds to the host expires, the switch immediately deletes its forwarding entry
from the forwarding table.
When an IGMPv2 or IGMPv3 host leaves a multicast group, it sends an IGMP leave message to the
multicast router to inform of such leave.
When receiving an IGMP leave message from the last member port, the switch forwards it through all
router ports in the VLAN and resets the aging timer on the receiving port (the port that received the IGMP
leave message) instead of immediately deleting its corresponding forwarding entry from the forwarding
table as it cannot know whether there are still other members of that multicast group attached to such
port.
After receiving the IGMP leave message from a host, the IGMP querier resolves the multicast group
address in the message and sends an IGMP group-specific query to that multicast group through the port
that received the leave message. After receiving the IGMP group-specific query, the switch forwards it
through all its router ports in the VLAN and all member ports for that multicast group.
The switch also performs the following actions on the port that received the IGMP leave message: If the
port receives any IGMP membership report in response to the group-specific query before the aging timer
expires, the switch considers that some host attached to the port is receiving or expecting to receive
multicast data from that multicast group and will reset the aging timer on the port.
If the port receives no IGMP membership report in response to the group-specific query before its aging
timer expires, the switch considers that no hosts attached to the port are still members of that multicast
group address and thus removes the multicast forwarding entry that the port corresponds to from the
forwarding table when the aging timer expires.
IGMP Snooping
To config IGMP Snooping settings, click Device Management -> IGSP -> IGMP Snooping.
Fields on the screen are described below:
Field
Description
IGSP Status
Enable/disable the IGMP Snooping feature.
Routing Port Age
Config routing port aging time (1-1000 sec). The
default is 105s.
87

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tenda TEG3224P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tenda TEG3224P in de taal/talen: Engels als bijlage per email.

De handleiding is 8,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info